SEARCH Search GolfWorks
BRAND
  GolfWorks Canada | Online Catalog | Find the Right Golf Shaft Become a Fan of the GolfWorks
Tapered Tip Iron Ferrules . .355"



Tapered Tip Iron Ferrules . .355"

Tell a Friend about this item

Product Name Price Status Qty
65TI Dozen - Black Std .355" Iron Ferrule $2.49 In Stock
65TI Single - Black Std .355" Iron Ferrule $0.35 In Stock
66TI Dozen - Black Long .355" Iron Ferrule $2.49 In Stock
66TI Single - Black Long .355" Iron Ferrule $0.35 In Stock
67TI Dozen - Black X-Long .355" Iron Ferrule $2.49 In Stock
67TI Single - Black X-Long 67TI .355" Iron Ferrule $0.35 In Stock
75TI Dozen - Black/Chrome Long .355" Iron Ferrule $3.99 In Stock
75TI Single - Black/Chrome Long .355" Iron Ferrule $0.50 In Stock
76TI Dozen - Black/Gold Long .355" Iron Ferrule $3.99 In Stock
76TI Single - Black/Gold Long .355" Iron Ferrule $0.50 In Stock
Dozen Rubber O-Rings $2.25 In Stock
Single Rubber O-Ring $0.35 In Stock
  • Product Description
  • Reviews
  • Questions & Answers
Tapered Tip Iron Ferrules . .355"
HUGE?FERRULE?SELECTION! A complete selection of ferrules with modern outside diameters that match perfectly to the outside diameter of our hosels. All ferrules have a 19° countersink which allows a cushion of epoxy to form between the top of the hosel and the inside of the ferrule, strengthening the bond. Each ferrule also is “pre-washed,” arriving at your shop with a high-gloss finish and no need for an acetone wipe to make it shine!Choose iron ferrules from standard to XX-long lengths. Available as single ferrules or buy ferrules by the dozen.


 
AccessDeniedAccess Denied37F24769E976A933nwSBSy7xeEnkL6qVlAahTkWq1wZkxrQQqB8JGAR2YALvy9VFP6nlD3K7voNFMWiRfxjSvBpKVDo=
 

I am reshaft a set of 2014 taylormade tp cb irons with .355 gs95 s300 shafts that i installed in my r7 tp irons. The ferrules look to be 7/8" long and solid black. What do you reccomend?

Asked by: Dino
Personally I would use the 61PI. Even though it is a .370" ferrule the .355" taper tip shafts taper out to approximately .370" where the shaft exits the top of the hosel. So they do fit. They also will match closer to the outside diameter of the iron hosel and require less finishing. The taper tip ferrules have larger outside diameters to match some of the older clubs and require more finishing.
Answered by: JimY
Date published: 2016-01-21

?I first asked a question about ferrules for the calloway X22 tour irons I was told that it is a stock 61 pw ?I looked it up. ?Wrong, ?that ferrule is used on woods. after asking at other sites I found that Calloway uses a collared ?ferrules on x irons

Asked by: Noname
Sorry I meant to say 61PI. The X22 Tour irons do use .355" taper tip shafts but taper tip shafts taper out to approximately .370" where the shaft exits the top of the hosel. I have been using taper tip ferrules on taper tip shafts for years. For a Collared ferrule the BB0001 should work. http://www.golfworks.com/product.asp?pn=BB0001 We do stock Callaway Collared ferrules for irons. They are listed for the newer model Callaway irons but would probably fit the X22 as well. The BB9051 for .355" taper tip shafts and the BB9050 for .370" parallel tip shafts. http://www.golfworks.com/product.asp?pn=BB9051 http://www.golfworks.com/product.asp?pn=BB9050
Answered by: JimY
Date published: 2015-12-17

I am reshafting a set of Calloway x22 tour irons. ?Is there a special ferel for that club head?

Asked by: Noname
Callaway X22 Tour Irons use a stock ferrule like our 61PW. http://www.golfworks.com/product.asp?pn=60PW
Answered by: JimY
Date published: 2015-09-09

Which ferrules for 714 ap2 titiliest irons

Asked by: Mike fritz
We are not sure of the exact length of the 714 ap2 ferrule, but the 65 TI should be close and would be an adequate replacement ferrule.
Answered by: GW2002
Date published: 2015-06-24

Looking for ferrules to replace shafts in my Titleist Vokey SM5 wedges. Not sure which to choose. Can you please let me know so I can get my shafts and ferrules ordered ? Thank You !

Asked by: tball
Titleist Vokey Wedges use a .355" taper tip shaft so a ferrule like our 66TI which is designed for taper tip shafts will work well and match well to the stock ferrules that Titleist uses. Another option, and one that I personally use, is to use the 61PI ferrule which is designed for .370" parallel tip shafts. .355" taper tip shaft have tapered out to approximately .370" where the shaft exits the top of the hosel so the .370" parallel ferrule will fit and the outside diameter of the 61PI will fit closer to the outside diameter of the hosel then the 66TI ferrule. There is more ferrule finishing for size with the 66TI then the 61PI.
Answered by: JimY
Date published: 2015-06-10

What size does the Titleist taper tip iron shafts use?

Asked by: Supertech
All Titleist taper tip shafts have a .355" tip diameter. Any .355" taper ferrule will work with the Titleist irons. These ferrules are specific to the AP1 & AP2 iron heads. http://www.golfworks.com/product.asp?pn=BB9063
Answered by: Admin
Date published: 2016-01-09

i am pulling a set of shafts from taylormade r 9 b stamps and putting them in mizuno mp 64 they are .355 taper what ferrules do I need?

Asked by: pro1
You could use the taper tip ferrule like this or you could use a .370" ferrule like the 61PI. Taper tip shafts are only .355" at the very tip of the shaft and taper out to approximately .370" where the shaft exits the top of the hosel so the .370" ferrule will fit and they will require less sizing to match the outside diameter of the ferrule to the hosel.
Answered by: JimY
Date published: 2015-04-13

Do the .355 ferrules like the 67TI fit flush to the hosel or does it need to be filed or sanded down?

Asked by: gary3aces
typically the outside diameter of the ferrule will need to be sanded to match the OD of the hosel
Answered by: Kevin F
Date published: 2015-03-27
  • 2016-02-08T07:43CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_65TIS, PRD, sort_recentAnswersFirst
  • clientName_golfworks