SEARCH Search GolfWorks
  GolfWorks Canada | Online Catalog | Find the Right Golf Shaft Become a Fan of the GolfWorks
AXE XCaliber Taper Tip Graphite Iron Shaft Set

AXE XCaliber Taper Tip Graphite Iron Shaft Set

Tell a Friend about this item

Product Name Price Status Qty
XCaliber R Flex - .355", Taper Tip Set (39"-36") (75g) 3B2H $111.93 In Stock
XCaliber S Flex - .355", Taper Tip Set (39"-36") - (85g) 4B2H $111.93 Backordered
Shaft Service - Add. Cost
Please specify hosel depth, playing length and club head type in the "Notes" at Checkout

Pureing 1-3 $15.50
4+ $13.50
Tip & Butt Trimming $4.95
Tip Prepping $2.95
  • Product Description
  • Reviews
  • Questions & Answers
AXE XCaliber Taper Tip Graphite Iron Shaft Set

The Arthur Xtreme Engineering Xcaliber graphite iron shaft features Zone Stiffness Technology (ZST) which helps golf shots get airborne without excessive spin.

  • .355" taper tip diameter
  • Lowest balance point of any iron in the industry combined with a med/stiff lower section helps get shots airborne without excessive spin
  • At 15 cpm stiffer than the XCaliber Hybrid, easy to make a progressively stiffer set of clubs

Individual AXE XCaliber Iron Shafts can be purchased here

Trimming Instructions

Arthur Xtreme Engineering Xcaliber Graphite Iron Shaft Specifications

AXE XCaliber Taper Tip Graphite Iron Shaft Set is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Great graphite taper tip shafts Excellent set of taper tip shafts for forged irons. Perfect balance, good trajectory and they look great. A fantastic way of extending the life of many older forged iron sets. Highly recommended.
Date published: 2014-08-17
Rated 5 out of 5 by from Very consistent ..... Good weight.. One of few taper tip irons shafts available at a decent, reasonable price.
Date published: 2015-10-25
  • 2015-11-27T08:25CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_AS0028S, PRD, sort_relevancy
  • clientName_golfworks

Could thes shafts be soft stepped down to an A flex or maybe an A+?

Asked by: jrob
Yes it can be soft stepped. To get it to an A flex you would need to probably soft step 2 clubs, put the 4 iron shaft into the 6 iron. Soft stepping 1 club would get you the A+ or between the A and R. Your set makeup will dictate how much you can soft step.
Answered by: JimY
Date published: 2015-11-19

Are these available in an A flex for Tit. 710 Ap1's/

Asked by: jrob
The only .355" taper tip graphite iron shaft we stock in an A flex is the Aerotech Steelfiber 70CW. (AT0020I) Another option would be to have the Titleist irons reamed or rebored to accept a .370" parallel tip shaft. We do offer this service.
Answered by: JimY
Date published: 2015-11-17

I am looking to put this shaft into a set of Mizuno 825 pro irons, will .355 shaft fit? Is there anything special that needs done? Is puring really necessary?

Asked by: RQM1
Yes the .355" taper tip will fit the Mizuno 825 pro irons. Puring identifies tolerances in shaft manufacturing process that could keep the shafts from playing as if it is perfectly round and perfectly straight. Puring the shafts and aligning them makes them play as if they are pefectly round and perfectly straight. It has been proven to give a better tighter impact pattern on face impacts.
Answered by: JimY
Date published: 2015-11-10

Do these iron shafts play true to flex or are they softer or stiffer to flex

Asked by: Skip007
I would tell you that they play true to flex to slightly softer but not stiffer then the listed flex.
Answered by: JimY
Date published: 2015-10-19

Excaliber .355 taper tip shaft group is to cover which club heads 4 thru PW or??

Asked by: Aloisiojones
The set of shafts is for 4 through PW. Individual shafts can be ordered using code AS0028.
Answered by: JimY
Date published: 2015-10-19

Will this shaft fit ping g25 irons?

Asked by: Fred charley
Yes, the Ping G25 irons have a .355" tapered hosel. The XCaliber graphite iron shafts will fit perfectly.
Answered by: Admin
Date published: 2015-07-31

I am considering reshafting a set of Ping i3 blades with graphite to increase distance and was wondering if the hosels need to be countersunk. Would this be a good shaft option for a person who has had 2 total knee replacements and has lost distance.?

Asked by: Skip007
The Ping I3 blades would not need to be countersunk for graphite shaft installation. They would be ready to accept graphite shafts. The Xcaliber iron shafts play very well and could match well with the Ping I3 Blade irons. You will need the .355" tip diameter shafts for the Ping irons.
Answered by: JimY
Date published: 2015-07-21

I have ping eye 2 irons so need.355 tapered tip how many come in set? How to trim for length, and how to order additional shafts if set not sufficient.

Asked by: bob isbell
There ar 7 shafts in the AS0028 set 36-39" in 1/2" increments. You can order the individual lengths under code AS0028. Since these are taper tip, you trim nothing from the tip. Simply install the shafts, then trim to your final playing length from the butt end.
Answered by: GW2002
Date published: 2015-05-26
  • 2015-11-27T08:34CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_AS0028S, PRD, sort_recentAnswersFirst
  • clientName_golfworks