SEARCH Search GolfWorks
  GolfWorks Canada | Online Catalog | Find the Right Golf Shaft Become a Fan of the GolfWorks
AXE XCaliber Taper Tip Graphite Iron Shaft Set

AXE XCaliber Taper Tip Graphite Iron Shaft Set

Tell a Friend about this item

Product Name Price Status Qty
XCaliber R Flex - .355", Taper Tip Set (39"-36") (75g) 3B2H $139.99 In Stock
XCaliber S Flex - .355", Taper Tip Set (39"-36") - (85g) 4B2H $139.99 In Stock
Shaft Service - Add. Cost
Please specify hosel depth, playing length and club head type in the "Notes" at Checkout

Pureing 1-3 $15.50
4+ $13.50
Tip & Butt Trimming $4.95
Tip Prepping $2.95
  • Product Description
  • Reviews
  • Questions & Answers
AXE XCaliber Taper Tip Graphite Iron Shaft Set

The Arthur Xtreme Engineering Xcaliber graphite iron shaft features Zone Stiffness Technology (ZST) which helps golf shots get airborne without excessive spin.

  • .355" taper tip diameter
  • Lowest balance point of any iron in the industry combined with a med/stiff lower section helps get shots airborne without excessive spin
  • At 15 cpm stiffer than the XCaliber Hybrid, easy to make a progressively stiffer set of clubs

Individual AXE XCaliber Iron Shafts can be purchased here

Trimming Instructions

Arthur Xtreme Engineering Xcaliber Graphite Iron Shaft Specifications

AXE XCaliber Taper Tip Graphite Iron Shaft Set is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Great graphite taper tip shafts Excellent set of taper tip shafts for forged irons. Perfect balance, good trajectory and they look great. A fantastic way of extending the life of many older forged iron sets. Highly recommended.
Date published: 2014-08-17
Rated 5 out of 5 by from Very consistent ..... Good weight.. One of few taper tip irons shafts available at a decent, reasonable price.
Date published: 2015-10-25
  • 2016-02-10T07:15CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_AS0028S, PRD, sort_relevancy
  • clientName_golfworks

Hi, I will like to order a set of X-calibur 0.355 graphite shaft. It is mentioned in stock but when I try to order, It displays Backordered. Any estimate when I can be in stock. This is replace my current Rife Project X 5.5 shaft on Bridestone J36 4-PW.

Asked by: sunil Kochhar
We have the shafts in stock. We pull them and put them together into the set of shafts. We will get the web site corrected shortly. You can also order the shafts individually under the AS0028 code.
Answered by: JimY
Date published: 2016-01-27

Hi Many thanks to my previous question, could you suggest replacement graphite shafts for project X 5.5 steel shafts.? I am not able to understand the table you sent with my original response

Asked by: sunil Kochhar
The Aerotech Steelfiber 70 CW iron shafts that you asked about in your other post could be a good replacement for the Project X 5.5. If you are trying to match the 5.5 flex of the Project X the R flex Steel Fiber will be closer.
Answered by: JimY
Date published: 2016-01-19

Hello I have an iron set of Bridgestone J36 (combo) with Rifle Project x true temper 5.5 steel shaft. I believe it is stiff flex. I am looking to change the shafts to Grafite. Would Xcaliber graphite in regular flex will fit the heads? thanks in advance.

Asked by: sunil Kochhar
Hi I seems your response is only partially correct. I am looking to change the iron shafts with Graphite shafts and the specs of Xcaliber shafts suggest 0.355 see below XCaliber R Flex - .355", Taper Tip Set (39"-36") (75g) 3B2H $139.99 In Stock I guess this a set of 4-PW.? Thanks again for confirming.?
Answered by: sunil Kochhar
Date published: 2016-01-20

Can you add tip weight to these shafts if so what is the best type of weight,? lead powder or plugs?

Asked by: ohio
The standard lead tip weights do not fit up into these shafts. You can slightly sand the stem of the weight to make them fit or I have personally just used the head of the weight and cut the stem off. We never recommend lead powder down the inside of a graphite shaft. It will extend up inside the shaft above the top of the iron hosel and could create a shear point that could cause the shaft to break.
Answered by: JimY
Date published: 2016-01-05

I have bought a set of these shafts and would like info on installing them. I believe they have been spine aligned, if so what direction should they be installed. I read that the 9-3 o'clock direction is the best line, is this correct. Thanks,Mike.

Asked by: Ozmike
It can depend on whether they have been spine aligned or SST Pured. If they have been SST Pured there will be a sticker near the tip end of the shaft with a line on the shaft. During installation you would put this line on the top center of the shaft and this will align the stiff side of the shaft to the target. If they have been spine aligned there should be some type of mark that was put on the shaft to indicate the spine. For a right hand golfer the preferred method would be to put this mark facing away from the target, 3 o'clock, so that the stiff side of the shaft will face the target. The Xcaliber shafts are not spine aligned from the factory. They test them using an oscillation test and they mark the osciallation plane with a white line. They turn the shaft 90 degrees and mark the shaft with a red line. During installation you install the red line on the top center of the shaft to put the oscillation plane in the 9 to 3 o'clock position. With this test you do not know which side of the shaft is the stiff side.
Answered by: JimY
Date published: 2015-12-30

Do you know when these shafts will arrive from backorder in the stiff flex? Thank you

Asked by: cabester1
The Xcaliber taper tip graphite iron sets are not being discontinued. We had some incorrect information in the computer. We will still stock these iron shafts in sets as well as individually. I am told the sets should be in just before Christmas. Sorry for the incorrect post.
Answered by: JimY
Date published: 2015-12-08

Could thes shafts be soft stepped down to an A flex or maybe an A+?

Asked by: jrob
Yes it can be soft stepped. To get it to an A flex you would need to probably soft step 2 clubs, put the 4 iron shaft into the 6 iron. Soft stepping 1 club would get you the A+ or between the A and R. Your set makeup will dictate how much you can soft step.
Answered by: JimY
Date published: 2015-11-19

Are these available in an A flex for Tit. 710 Ap1's/

Asked by: jrob
The only .355" taper tip graphite iron shaft we stock in an A flex is the Aerotech Steelfiber 70CW. (AT0020I) Another option would be to have the Titleist irons reamed or rebored to accept a .370" parallel tip shaft. We do offer this service.
Answered by: JimY
Date published: 2015-11-17
  • 2016-02-10T07:18CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_21
  • loc_en_US, sid_AS0028S, PRD, sort_recentAnswersFirst
  • clientName_golfworks