SEARCH Search GolfWorks
BRAND
  GolfWorks Canada | Online Catalog | Find the Right Golf Shaft Become a Fan of the GolfWorks
Collared Golf Club Ferrules



Collared Golf Club Ferrules

Tell a Friend about this item

Product Name Price Status Qty
BB0002 - Wood .335 - 1/4" length (Dozen) $3.99 In Stock
BB0003 - Wood .350 - 1/4" length (Dozen) $3.99 In Stock
BB0005 - Wood .335 - 1/2" length (Dozen) $3.99 In Stock
BB0007 - Wood .350 - 1/2" length (Dozen) $3.99 In Stock
BB0006 -Wood .335 - 1/2" length (Dozen) $3.99 In Stock
BB0004 - Iron .370 - 1/4" length (Dozen) $3.99 In Stock
BB0008 - Iron .370 - 1/2" length (Dozen) $3.99 In Stock
BB0001 - Iron .370 - 3/4" length (Dozen) $3.99 In Stock
  • Product Description
  • Reviews
  • Questions & Answers
Collared Golf Club Ferrules

Collared Ferrules are designed specifically for use with graphite golf shafts. The ferrule collar fits into the club head's hosel to cushion the contact point between the shaft and hosel.


 
Collared Golf Club Ferrules is rated 3.0 out of 5 by 2.
Rated 5 out of 5 by from nice ferrule I buy these for shafting irons. The 370 are very snug on 370 shafts so they work very well on 355 tapers. Minimal turning if any is required due to size of the ferrules and the collar makes for perfect alignment without having to readjust loft and lie in most cases.
Date published: 2016-02-06
Rated 1 out of 5 by from ferrules The ferrules would not fit the shafts that I purchased at the same time. I had to drill out the inner diameters and in so doing, scuffed up the outer surface.
Date published: 2015-07-27
  • 2016-02-14T07:31CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_BB0001, PRD, sort_relevancy
  • clientName_golfworks
 

I need a collared ferrules for Taylor Made TP irons. What size do I need?

Asked by: Kchock
The BB0001 should work fine. Even though this is a .370" ferrule and the TM TP irons use a .355" taper tip shaft, taper tip shafts taper out to approximately .370" where the shaft exist the top of the hosel so they will fit.
Answered by: JimY
Date published: 2016-02-01

I am reshafting a Callaway FT hybrid. ?I am planning to order the Aldilia Value AV0029 Shaft. ?Which ferrule would be appropriate, the BB0008??

Asked by: JimmieWho
The Callaway FT Hybrids used a .350" tip diameter shaft and the first ones (2006) were a bore through design that would use the CSS Adaptor. http://www.callawaygolfpreowned.com/golf-clubs/hybrids/fwoods-ft-hybrid.html?cgid=hybrids http://www.golfworks.com/product.asp?pn=CSS The 2008 Model was also listed as a .350" tip diameter shaft. http://www.callawaygolfpreowned.com/golf-clubs/hybrids/yhf2826350.html?cgid=hybrids&genderHand=Mens%2FLeft&gclid=CP_7 It used a ferrule like our 82PW. The Aldila Value Series Hybrid shaft will not fit the FT Hybrid. It is to large. You would have to use the Value Series wood shaft with a .335" tip diameter and use the BB9002 Adaptor if you have the Bore Through design or the Universal Plastic Shim (BB9018) if you have the later 2008 non bore through design. http://www.golfworks.com/product.asp_Q_pn_E_BB9002 http://www.golfworks.com/product.asp?pn=BB9018
Answered by: JimY
Date published: 2016-01-18

how are they packaged and how many to a pack?

Asked by: butzie
These are sold by the dozen.
Answered by: JimY
Date published: 2015-12-29

are these priced each or by the dozen?

Asked by: butzie
These are priced by the dozen.
Answered by: JimY
Date published: 2015-12-29

Can I replace collared ferrules with split ferrules? I don't want to remove club heads; just want to replace the ferrules. Callaway Razr X

Asked by: Martie
Yes you can replace collared ferrule with split ferrules. I would make sure that the counter bore that the collar from the collared ferrule fills with epoxy when you install the split ferrule and you will be fine.
Answered by: JimY
Date published: 2015-10-30

Is the 1/4" ferrule a replacement for the Taylormade Aeroburner driver ferrule?

Asked by: Edie
The Taylor Made Aeroburner driver uses a .350" tip diameter shaft so if you are using a .350" tip diameter shaft you will need the BB0007 collared ferrule. If you are shimming a .335" tip diameter shaft you will probably need to use a standard ferrule like the 59PW. The OD at .485" on the .350" collared ferrule might not be big enough to fit the hosel OD. With the 59PW the OD is .505".
Answered by: JimY
Date published: 2015-10-16

What ferrule type do I need for Burner Superfast 2.0 .350 tip?

Asked by: Kibby
The BB9009 would be the ferrule for the Burner Superfast 2.0 .350" tip. http://www.golfworks.com/product.asp_Q_pn_E_BB9009
Answered by: JimY
Date published: 2015-09-14

What type ferrule do I need for Adams Redline .350 tip

Asked by: Kibby
I am not remembering the Adams Redline as having a Collared Ferrule. It would have had a ferrule like the 82PW. http://www.golfworks.com/product.asp?pn=60PW
Answered by: JimY
Date published: 2015-09-14
  • 2016-02-14T07:41CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_27
  • loc_en_US, sid_BB0001, PRD, sort_recentAnswersFirst
  • clientName_golfworks