SEARCH Search GolfWorks
  GolfWorks Canada | Online Catalog | Find the Right Golf Shaft Become a Fan of the GolfWorks
Callaway Opti-Fit Shaft Adaptor Sleeve

Callaway Opti-Fit Shaft Adaptor Sleeve

Tell a Friend about this item

Product Name Price Status Qty
Callaway Optifit Shaft Adaptor - LH, .335" $24.99 In Stock

  • Product Description
  • Reviews
  • Questions & Answers
Callaway Opti-Fit Shaft Adaptor Sleeve

This authentic Callaway factory Razr Fit - OptiFit Hosel adjusts the face angle in Open, Square or Closed positions at address to improve accuracy and trajectory.

  • Opti-Fit adaptor fits Callaway adjustable drivers - Razr-Fit, Razr-Fit Xtreme and X-Hot.

Callaway Opti-Fit Shaft Adaptor Sleeve is rated 2.6667 out of 5 by 3.
Rated 2 out of 5 by from Bad Quality Had this put on my Graphite Design shaft and it worked well for 5 or 6 rounds...but then I noticed that it is separating at the ferrule. There is about a 3/16th inch gap now, and growing. It also rattles now upon impact :( I'm afraid the driver head will come flying off if I continue to use it.
Date published: 2013-02-20
Rated 5 out of 5 by from Good product The review below sounds like an installation, not QC, issue. I've had no problems with these adapters. The inside of the ferrule should be abraded and glued so it will no slide up the shaft. The ferrule itself is collared so protects the shaft from snapping at the top of the adapter.
Date published: 2013-06-06
Rated 1 out of 5 by from Quality??? Epoxied in place using Golfworks epoxy. Epoxy set up well. Installed a head and in 9 holes the head was moving. Removed head and checked adapter and found the tip portion where it screws into the head moved. I bought two and have installed the second. More later.
Date published: 2012-11-17
  • 2015-07-02T07:36CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_CA0010, PRD, sort_relevancy
  • clientName_golfworks

I am right handed. Is this what I am looking for? I have a RAZR FIT EXTREME driver.

Asked by: jrpatti
We only have LH factory authentic Razr adaptors remaining in stock. You can use this adaptor in a RH head. However, the settings would be opposite. "Closed" would be "Open" and "Open" would be "Closed" We do have an aftermarket adaptor available in RH as well:
Answered by: Admin
Date published: 2015-05-14

Are there two adapters to accept either .335 or .350 shafts?

Asked by: Druw
The CA0010 adaptor for RH is no longer available and we are sold out of them. We do have .335" and .350" still available for LH models.
Answered by: JimY
Date published: 2015-02-23

What size of screw goes on this adaptor? Mine came to me and didn't have one.

Asked by: randy64
Chances are that the screw is still inside the head. Most of the screws stay inside the head when you are adjusting the shafts. Not 100 positive but the clubs I have used tend to have the screw stay inside the clubhead.
Answered by: BIRD 1
Date published: 2015-01-13

Does the adapter add to the length of the shaft? If so, by how many inches?

Asked by: sglee
Difficult to know how to answer. If you are just taking a raw shaft and installing an adaptor and wanting to know the distance from the tip of the adaptor to the butt of the shaft, then the adaptor would add length to the "shaft". That has nothing to do with the overall clubs "playing length". Usually, adaptors are installed on the shafts, the shaft and adaptors are inserted in to the head, then the shafts are cut to the final playing length. Most shaft manfacturers tell us no special trimming from the tip end needs to occur for most of the major adjustable driver adaptors. One an adpator is installed and inserted ino the head, the shaft can be measured and trimmed to final playing length.
Answered by: GW2002
Date published: 2014-10-06

What is the difference between RH and LH (Is it the cog)

Asked by: Alfred
The only difference is the markings for loft and face angle. These markings are printed in reverse order vs. the RH adaptor.
Answered by: Admin
Date published: 2014-09-30

Can this adaptor sleeve be removed if it fails??

Asked by: Geech
  • 2015-07-02T07:49CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_CA0010, PRD, sort_recentAnswersFirst
  • clientName_golfworks