SEARCH Search GolfWorks
  GolfWorks Canada | Online Catalog | Find the Right Golf Shaft Become a Fan of the GolfWorks
KBS Tour Steel Iron Shafts

KBS Tour Steel Iron Shafts

Tell a Friend about this item

Product Name Price Status Qty
R Flex - 370 tip (120g) 3B3H $26.95 In Stock
S Flex - 370 tip (130g) 4B2H $26.95 In Stock
X Flex - 370 tip (133g) 5C2H $26.95 In Stock
Shaft Service - Add. Cost
Please specify hosel depth, playing length and club head type in the "Notes" at Checkout

Pureing 1-3 $15.50
4+ $13.50
Tip & Butt Trimming $4.95
Tip Prepping $2.95
  • Product Description
  • Reviews
  • Questions & Answers
KBS Tour Steel Iron Shafts

The KBS Tour steel iron shaft is perfect for club builders and players who want to customize the shaft's effect on ball spin and ball flight.

  • .370" tip diameter

Trimming Instructions

KBS Trimming Instructions

KBS Tour Steel Iron Shafts is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from High Quality!! This is the best steel shaft on the market today. Performance cannot be beat.
Date published: 2015-05-25
  • 2015-10-04T04:28CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_FS0019, PRD, sort_relevancy
  • clientName_golfworks

What tip diameter is needed for a Callaway Diablo forged iron in a stepped shaft?

Asked by: RickyC
Diablo Forged irons us a .370" parallel tip shaft. For future reference you can find that information at these links on our web site.
Answered by: JimY
Date published: 2015-10-02

I have a set of Taylormade Speed Blade Irons. Which of the KBS iron shafts would work in those irons. I would prefer a non-stepped shaft.

Asked by: Roto
The Taylor Made Speed Blade irons use a .370" parallel tip shaft. In the KBS shaft you could use either the C-Taper or C-Taper LIte in the .370" tip diameter. These are the only steppless shafts offered by KBS.
Answered by: JimY
Date published: 2015-07-21

Will these shafts fit Tommy Armour 845s irons?

Asked by: Howie15
The Tommy Armour 845s irons use a .355" taper tip shaft. You would need to order the KBS Tour FS0018 shafts to fit these irons.
Answered by: JimY
Date published: 2015-07-02

I have an R11 sand wedge and a wedge with graphite shafts I want to install kbs 90 shafts stiff. do I need to buy 355 or 370 tip shafts?

Asked by: golfpro
R11 irons use the .370" parallel tip shaft.
Answered by: JimY
Date published: 2015-06-22

Assuming my KBS Tour shaft fit doesn't work out to my playing length (see my post yesterday), what would you recommend as a good alternative. I'm playing the TT Score LT in regular that are a bit too soft for me. I need a stiffer flex and a mid traj.

Asked by: Mr C
There is a big difference between the stiffness (both actual and feel) in the Score shafts and the KBS Tour shafts. I would suggest a TT Dynamic Gold R flex if you want to stay with a heavier shaft and the TT XP105 if you would like to go to lighter shaft.
Answered by: Admin
Date published: 2015-05-14

I am getting a set of 5-Gap KBS .355 pulled from Taylormade Rocketbladez Tour standard length which is 37.75" 5 iron which is what my current 5-Gap TE Forged are set to. Will I be able to put these shafts in the TE Forged and still play to the same length

Asked by: Mr C
Not knowing specifically the hosel measurements from the Rocketbladez Tour irons and educated guess tells me you will be approximately 1/4" shorter with these shafts installed in the TE Forged irons. Our TE forged irons have a 1" bottom of bore to ground line measurement and normally a Tour Blade type of iron from Taylor Made will have a 1 1/4" bottom of bore to ground line measurement. With a 1" bottom of bore to ground line measurement if I wanted a 37.75" #5 iron the raw shaft length would be 36.75" to equal 37.75" finished length. With a 1 1/4" bottom of bore to ground line measurement to have a 37.75" #5 iron the shaft would measure 36.5". So installing the 36.5" raw length 5 iron shaft into the TE forged at 1" bottom of bore to ground line would make a finished club length of 37.5" or 1/4" shorter.
Answered by: JimY
Date published: 2015-05-11


Asked by: Dusty the Reeser
Follow tip code IR9 on this iron tip trimming chart.
Answered by: JimY
Date published: 2015-04-13

how far below the grip are the KBS shaft bands placed ?

Asked by: hulk
Generally, shaft labels are placed between the first full steps visible coming out of the grip, or approximately 2 inches below the grip.
Answered by: GW2002
Date published: 2015-03-31
  • 2015-10-04T04:28CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_FS0019, PRD, sort_recentAnswersFirst
  • clientName_golfworks