SEARCH Search GolfWorks
  GolfWorks Canada | Online Catalog | Find the Right Golf Shaft Become a Fan of the GolfWorks
Graphite Shaft Extensions

Graphite Shaft Extensions

Tell a Friend about this item

Product Name Price Status Qty
GSE - Graphite Shaft Extender .600 $1.99 In Stock
USGE - Ultralite Graphite Shaft Extender .600 $1.99 In Stock
Shaft Extension Adhesive - 30 ml. Syringe $6.99 Backordered
  • Product Description
  • Reviews
  • Questions & Answers
Graphite Shaft Extensions

The GolfWorks offers graphite extensions for standard or ultralite shafts. These 3" extensions are made of injection-molded graphite for strength and durability. Choose the extender that fits your shaft. Can be sanded to fit most graphite shafts.

Graphite Shaft Extensions is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Terrific fit! Needed to lengthen a short shaft and this product Worked like a champ----easy to install!
Date published: 2015-09-10
Rated 5 out of 5 by from Best equipment supplier ever! Products are the best; service excellent; prices fair
Date published: 2015-06-25
  • 2016-02-13T07:24CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_GSE, PRD, sort_relevancy
  • clientName_golfworks

what is the maximum length to extend a graphite extension (1"-2") into a graphite shafted iron before its integrity is compromised to break????

Asked by: Leigh
Personally I have always stayed at 1" with both steel and graphite, with the exception of putters. When we get new extensions for graphite shafts we always test them at the full length, which is approximately 3" and with the ones we currently sell we never had any of those break. Installing a shaft extension becomes the clubmaker's liability. The shaft manufacture will not warrant a shaft with an extension so I always wanted to be comfortable with my liability.
Answered by: JimY
Date published: 2016-02-09

I have an Aldila Rogue black60 - 4.0-R with a butt diameter of .640. Which graphite shaft extender would I use? thanks

Asked by: Sweetness
Actually in the GW4000 extensions the Silver (.575") fits the best but it is still a little loose. This shaft tapers down both outside and inside pretty much right from the butt end so there is a good chance this will fit and we do not have anything larger. I would mix a little Quik Center (QCSB) with the epoxy to tighten the fit.
Answered by: JimY
Date published: 2016-02-09

What is the diameter of the standard and ultralight shaft extenders?

Asked by: strick
On the GSE the post measurement is .480" and the USGE is .535" We also have the GW4000 extensions which have many more sizes available.
Answered by: JimY
Date published: 2015-12-31

Graphite shaft extension for Ping I-25 irons. What size ??

Asked by: Rjudea
Because graphite shafts vary more in weight, which effect wall thickness we need to know the inside diameter measurement at the butt end of the shaft. We do not have access to this information on other then the shafts we stock. The shaft is listed as 74 grams for the R flex and 86 grams on the S flex. Assuming a .600" butt diameter an educated guess would be the Blue (.490") extension.
Answered by: JimY
Date published: 2015-12-29

What's the correct graphite shaft extension for Kuro Kage MR0031 3B2M Butt Diameter 0.614?

Asked by: Anonymous
You want to order extension GW4000 and use the Purple coded extension which measures .545". I checked this extension and it fits well.
Answered by: JimY
Date published: 2015-10-27

I have an Aldila Tour Green 85 Hybrid Stiff shaft that has been butt cut one half inch too short. I believe the butt OD is 0.625 inches but don't know the inner diameter. What size graphite extender do I need? Many Thanks.

Asked by: Darker
The hard part about an extension for this shaft is that the butt end does not stay parallel for very long and then the shaft starts to taper and will taper both on the outside and inside. You may have to get a little creative with an extension for this shaft. I sized a few extensions right at the butt end and the GSE and wooden extension fit just a shade loose which could be good for your shaft which has been butt 1" already. Actually the wooden extension is probably your best bet because the post could be sanded to fit the inside diameter and any inside taper the shaft might have.
Answered by: JimY
Date published: 2015-10-13

what is the i.d. on your graphite shaft extensions? I have several of them in my stock but they seem awfully loose. My 1996 Callaway Big Bertha Irons have an o.d. of .607" and .500 i.d. Also will your standard shafting epoxy work both heads and exten

Asked by: Bigfoot
I suggest that you use the "gold" version of our Premium Shaft Extensions. These have an I.D. of .500". Yes, you can use standard shafting epoxy to install extensions. Please be careful not to use too much expoxy. You just want to lightly "butter" the extension. Standard shafting epoxy cures harder than our Extension Adhesive. A build up of standard shafting epoxy can break loose and cause rattles.
Answered by: Admin
Date published: 2015-10-12

oversize shaft extensions what is the correct sku# ?

Asked by: johnlarus
The oversize extension is the USGE code.
Answered by: JimY
Date published: 2015-09-21
  • 2016-02-13T07:18CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_28
  • loc_en_US, sid_GSE, PRD, sort_recentAnswersFirst
  • clientName_golfworks