Maltby CT250 Maximum MOI Draw Driver

The Maltby CT250 Maximum MOI Draw Driver club head combines every aspect of technology possible to produce straighter and longer drives. The width and breadth of the club head have been expanded to increase the perimeter weighting and locate the center of gravity low and to the back. The increased perimeter weighting raises the MOI (resistance to twisting) for maximum forgiveness. The rearward center of gravity location optimizes trajectory. The distribution of the mass is biased towards the heel of the golf club and the visible heel weighting screw enhances the draw bias. The positioning of more weight in the heel in the wide body design promotes easier golf club head rotation through the hitting zone, reducing a slight to moderate slice ball flight. The 1° closed face angle also promotes a more square golf club face at impact, as well as increases the effective loft (i.e. 10.5° with 1° closed face produces 11.5° “effective” loft at impact) for higher, straighter shots. The expanded club face surface also increases the perimeter weighting and instills confidence at address.

• Wider golf club head design increases Moment of Inertia (resistance to twisting) for more forgiveness on off-center hits
• Heel biased weighting aids in club head rotation, helping to square the club face at impact
• Low and back center of gravity location promotes higher launch angles for optimum distance off the tee
• Four Piece Forged, 6-4 Titanium construction
• 1° closed face angle at address helps reduce a slight to moderate slice ball flight
• 460cc club head (max allowed by USGA)
• .350" hosel bore diameter
• Available in 9.5°, 10.5°, and 12° loft options
• RH only
• Recommended golf ferrule – 62OW
• Product Code = MA0115