- Product Description
- Questions & Answers
Maltby MMB-17 Forged Iron Heads
- Satin chrome anti glare finish.
- Progressively designed “Blade” optimizes shot
trajectories from the long irons to the short irons
- “Weight relief pocket” and inverted muscle design in 3 thru
7 iron allow for correct c.g. location to maximize playability
- Tungsten toe weighting in the long irons (3,4,5) further
improves stability and forgiveness
- Traditionally designed short irons (8 thru PW,GW) provide the “controlled”
trajectories preferred by better players
- Offset and top line designed to appeal to purists wanting a traditional, solid
appearance at address
- MG (multi-groove) U-Groove Technology improves consistency in trajectory and spin.
- Manufactured from 8620 Carbon Steel for soft feel and adjustability
- Recommended ferrule – 74PI
- Product Code = MA0226
Maltby MMB-17 Forged Iron Heads is rated
Rated 4 out of
Great clubs but maybe a slight adjustment
Great clubs, have had these fitted with KBS Tour and they are great. If I ever where to advice a change to this clubhead it would be to make the top line the same as the TE`s and the same with the offset. That would make it look even more like a real players club and probably still keep most of it MPF points..? A great iron for most golfers
Date published: 2013-06-23
Rated 5 out of
I had to wait for these but I am glad I did. Initially I did not like them, but after getting the lie set correctly I am hitting them straight and consistently getting 5-10 extra yards throughout the set. Mis-hits do not penalize me any more than my previous clubs, and a hit in the center of the face feels effortless. I love the clean lines of this club.
Date published: 2013-07-31
Rated 5 out of
Heads feel great, nice soft feeling at impact. I'm able to work the ball both ways consistently and they are nice and forgiving. The weight relief in the long irons helps get the ball up in the air nicely. Even on off center hits, I dont feel like I'm losing a tremendous amount of distance. Awesome clubs!
Date published: 2015-01-20
Rated 5 out of
Great Iron. Got them with the TT Dynamic Gold shaft in 7-GW paired with 4-6 TE irons. Top lines are little different, but swing weight, lofts and feel matches perfectly. Was looking for a progressive set and built my own. Soft feel, consistent yardages - great clubs - very, very happy.
Date published: 2015-03-03
Rated 5 out of
The best iron that I have ever played
I just bought an extra set because they very foolishly are going to stop production of these heads. You can spend 3 times the money for a set of forged heads but you can't get anything better.
Date published: 2015-05-20
I am a 10 handicap 78 year old golfer with a set of these irons that I built. What swing weight should they be? Thanks
The swingweight is dependent on not only the head weight, but the shaft weight, the club length and the grip weight. Without knowing the shaft weight, the playing length, or the grip weight, we can not estimate what the final swing weight will be.
Date published: 2015-06-24
I am curious about the MMB irons. Will you all have full sets available anytime? I may be interested in a full set. Thanks, Chris
We have the MMB 17 irons currently available (MA0226S) in sets 3-PW or 4-GW. We will have individual heads available in a few months, but for now they are only available in the 3-PW or 4-GW sets.
Date published: 2015-06-17
is the 4 iron head not available in this set?
We do not have any 4 irons for the MMB-17's at this time. The MMB-17's are being discontinued but we have ordered some 4 irons to balance out the set inventory. Unfortunately we are not scheduled to have them until sometime in September. At that time we will likely package the remaining heads into sets and sell them as sets only. If there happens to be any extra's we would then sell those individually.
Date published: 2015-06-15
Because the MMB-17 is listed as a discontinued model, will there be a similar styled head offered in the near future?
No at this time there are no plans on replacing the MMB-17 with a similar model.
Date published: 2015-06-01
What are the loft and lie's of each, and can I get them bent later?
Scroll down the page at this link and you will see the loft and lie specifications for the MMB irons.
Date published: 2015-05-04
Are these clubs conforming to the usga groove rule? I would love to put these great looking heads into play for some minitour events in the midwest.?
So what he is saying is that they are not conforming since they are not listed in the USGA database as such.
It's possible you'd go to a tournament and they would do the search and not find any Maltby products. They have to be sent and approved!
Date published: 2015-04-25
How bendable are these Club heads. Need them about a degree and on-half up and want to bend them about one to two degrees stronger? So plenty of bending. Bought some from you supposed bendable and they kept breaking every time.
The MMB-17 iron heads can easily be bent +/-2 degrees for both loft and lie.
Date published: 2015-03-27
The site does not list the #7 and #4 irons. ?Are these available?
The MMB-17 is a discontinued model and we no longer have #4 or #7 irons left to be sold as individual iron heads. We do have complete sets on sale for $64 under retail. There are two 8 piece set options available, #3-PW or #4-PW & GW. The sets can be found here: http://www.golfworks.com/product.asp?pn=MA0226S
Date published: 2015-03-08