SEARCH Search GolfWorks
BRAND
  GolfWorks Canada | Online Catalog | Find the Right Golf Shaft Become a Fan of the GolfWorks
Steel Shaft Butt Extensions



Steel Shaft Butt Extensions

Tell a Friend about this item

Product Name Price Status Qty
.560 Butt Size Shaft Extension $2.59 In Stock
.580 Butt Size Shaft Extension $2.59 In Stock
.600 Butt Size Shaft Extension $2.59 In Stock
.620 Butt Size Shaft Extension $2.59 In Stock
Shaft Extension Adhesive - 30 ml. Syringe $6.99 Backordered
  • Product Description
  • Reviews
  • Questions & Answers
Steel Shaft Butt Extensions

The GolfWorks Steel Shaft Extensions can be used to extend the finished playing length of any steel shafted club. These 12" long steel butt extensions feature an 8 1/2" parallel mid sections that can be cut in the middle to create two 4 1/4" extensions. Each section has a tapered end to perfectly fit inside the shaft being extended. Each extension has a 1 5/8" shaft insertions depth and is chrome plated to prevent rusting.


 
Steel Shaft Butt Extensions is rated 4.75 out of 5 by 4.
Rated 5 out of 5 by from Sweet Add-On 4 Big Man.. Being a 6'3" guy with "monkey" arms. These cut to 1" extension brought my new/used irons to my old irons standard. No more slicing...sweet. Note one extension does 2 irons.
Date published: 2009-08-26
Rated 4 out of 5 by from Got the job done The fit was nice and snug for the most part, had one that was bent and had to repair, and another that when I test fit it, failed to line up well with the shaft. the other 8 ends were fine. for 3 bucks add an extra extension to make sure your covered. Overall still better than universal extensions I have used in the past and had one break
Date published: 2015-12-27
Rated 5 out of 5 by from Just what I needed Got an incredible deal on some Mizuno irons that were brand new, but came an inch short, so the original owner traded them in. Bought the irons, removed the stock grips, which are lousy anyway, glued in the extenders and put some good grips on. New custom fit set of Mizunos for less than $160. Can't beat that
Date published: 2016-01-05
Rated 5 out of 5 by from Good Deal Nice product! Fit was perfect. Shipping was super fast!
Date published: 2015-12-08
  • 2016-02-10T07:12CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_S60, PRD, sort_relevancy
  • clientName_golfworks
 

I am extending my True Temper DT Lite A/L Iron shafts. Believe they are .560 dia. but not sure. Which extenders should I use?

Asked by: DASEIT
I am not familiar with a True Temper DT Lite A/L flex to know for sure what the butt diameter would be. The True Temper TT Lite A/L iron shafts have a .580" butt diameter and would use the S58 extension. The older True Temper Dyanlite A/L iron shafts also had a .580" butt diameter. It has been quite a while since I have seen a .560" butt diameter steel shaft and it would have been unlikely in a lightweight steel shaft. With lightweight steel shafts generally the butt diameter will be a little bigger to help maintain structural strength. My educated guess says these are more likely a .580" butt diameter.
Answered by: JimY
Date published: 2016-01-14

should I get the .600" diameter extension to extend KBS Tour stiff (120gm) iron shafts? KBS website indicates the Butt OD for the shaft is .600"

Asked by: JLong
Yes you would want the S60 steel shaft extension.
Answered by: JimY
Date published: 2015-12-15

what is the shaft dia for an odyssey white ice putter

Asked by: terrywolfpacker
I believe there stock shafts are all .580" butt diameter. So you would use the S58 extension.
Answered by: JimY
Date published: 2015-12-14

What is the butt size needed for taylormade burner plus irons?

Asked by: tdakers
The stock steel shafts should be a .600" butt diameter which would use the S60 extension.
Answered by: JimY
Date published: 2015-12-02

I have TaylorMade Speedblade irons. What extensions do I need to get?

Asked by: oneway10
Assuming you have the stock Speedblade 85 steel shaft you would need the S60 steel shaft extension. The Speedblade 85 steel shaft has a .600" butt diameter.
Answered by: JimY
Date published: 2015-11-30

I am looking to extend a set of Titleist 716 AP1 irons with XP95 shafts. As far as I can tell, they are a .605" diameter, what size extension do I use here?

Asked by: LukeS
I checked to see how the S60 fits and it is a little loose but with some Quik Center it should fit well. http://www.golfworks.com/product.asp?pn=QCSB Other wise I would use the Universal Extension (GW1047) http://www.golfworks.com/product.asp?pn=GW1047
Answered by: JimY
Date published: 2015-11-24

I have a set of Ping isi and I am needing to extend them 1/2". ?What size do the ping shafts use?

Asked by: Pastor Mike
If your Ping ISI irons have the JZ shaft it is a .600" butt diameter and would use the S60 steel shaft extension. I show the JZ Cushion shaft had a .610" butt diameter and would use the Universal Extension (GW1047)
Answered by: JimY
Date published: 2015-11-04

I have a Callaway Mack Daddy PM grind with a KBS steel shaft that was cut to 33.5" ?What extender do I need to bring it back to standard>

Asked by: Cactus Jack
The shaft should be a .600" butt diameter and would use the S60 steel shaft extension.
Answered by: JimY
Date published: 2015-10-09
  • 2016-02-10T07:18CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_44
  • loc_en_US, sid_S60, PRD, sort_recentAnswersFirst
  • clientName_golfworks