SEARCH Search GolfWorks
BRAND
  GolfWorks Canada | Online Catalog | Find the Right Golf Shaft Become a Fan of the GolfWorks
TaylorMade R11 S, R11 and R9 Shaft Adaptor Sleeve



TaylorMade R11 S, R11 and R9 Shaft Adaptor Sleeve

Tell a Friend about this item

Product Name Price Status Qty
TaylorMade R11 S Adaptor - RH .335" - 3 Degree Offset $21.99 ($14.99) In Stock
TaylorMade R11 S Adaptor - LH .335" - 3 Degree Offset $21.99 ($14.99) In Stock
TaylorMade R11 S Adaptor - LH .350" - $21.99 ($14.99) Backordered

  • Product Description
  • Reviews
  • Questions & Answers
TaylorMade R11 S, R11 and R9 Shaft Adaptor Sleeve

Factory adjustable adaptor replacement sleeves for the TaylorMade™ R11 S driver. Also fits the R11 and R9 metal woods increasing loft/lie adjustability by 1 degree. Other than replacing a defective Adaptor, the Adaptor Sleeves can also be used to create multiple shaft options for the TaylorMade R11 S driver for less than the cost of simply reshafting your current shaft sleeve.

  • Available in RH .335" and LH - .335" and .350"
  • 3 degree offset
  • Ferrule is pre-assembled for easy assembly


 
AccessDeniedAccess Denied2E434CF725DBD6F0yQARakv7ssCkdlSuwJpJpg79QZNRYw0YWYuGYa55YAwWbDXFdGTE9nYH1Ld2o+VzFMw7WJkiWBk=
 

Is tipping the shaft necessary when using the adaptor to keep to manufacturers flex specs ?If so, how much tipping. ?Most shaft manufacturers don't recommend trimming anything on driver shafts. ?I heard Taylormade tips their shafts 1" prior to installing.

Asked by: Rikster
I don't know of any aftermarket driver shafts that require tip trimming for an adaptor or normal head install. I am not certain how TaylorMade assembles their clubs but 1" sounds excessive. There isn't a 1" difference from a standard driver bottom of bore to ground distance vs a driver with an adaptor.
Answered by: Admin
Date published: 2015-03-02

I need an adapter for a Taylormade R9 Supertri Driver with the stock Motore 60 Fujikura shaft. Which adapter must i buy?

Asked by: alanish
The R9 Supertri required a special adapter. The newer Taylor Made adapters will not fit this driver. We do have a couple of the Supertri adapters in .350" left in stock. http://www.golfworks.com/product.asp?pn=BB9038 The .335" tip diameter Motore would have to be shimmed to fit this adaptor using a SHIM15. http://www.golfworks.com/product.asp_Q_pn_E_SHIM
Answered by: JimY
Date published: 2015-02-24

I HAVE A PING TFC169D, R-FLEX WITH TAYLORMADE R11 ADAPTER 115656--WHAT BRAND/MODEL OF DRIVER HAED WILL FIT?

Asked by: MIGGI
Hello, The adaptor that you have in question would fit the Taylormade R11 and R11S.
Answered by: Brent Dill
Date published: 2014-12-23

What does -3 degree offset mean

Asked by: chas
Three degrees of offset simply means the range the adaptor can alter face angle and or loft. A 3 degree adaptor can change the face angle by 1.5 degrees in either direction.
Answered by: Admin
Date published: 2015-01-12

Hi, Will this fit the r9 supertri driver

Asked by: jhun
No it does not. You will need the BB9038 and request it for either the .335" or .350" tip diameter shaft. http://www.golfworks.com/product.asp?pn=BB9038
Answered by: JimY
Date published: 2014-10-13

Will This adapter fit a R9 Fairway wood head

Asked by: DixieDave
Yes, the TM0016 adaptor will fit into an R9 fairway wood.
Answered by: Admin
Date published: 2014-09-26

Shaft adapter # TM0016 RH, 335. Is this the correct adapter for the R9 Super Deep. Thanks, Ed

Asked by: Edck
No. The BB9038 .335 adaptor is the one for the Super Deep. the TM0016 is for the R11S and the R11 TP.
Answered by: GW2002
Date published: 2014-08-29

Is the standard R!!s adapters on that were sold also 3 degrees offset or just this one?

Asked by: gmadman2
  • 2015-03-05T09:17CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_TM0016, PRD, sort_recentAnswersFirst
  • clientName_golfworks