SEARCH Search GolfWorks
  GolfWorks Canada | Online Catalog | Find the Right Golf Shaft Become a Fan of the GolfWorks
True Temper Multi Step Lite Steel Iron Shafts

True Temper Multi Step Lite Steel Iron Shafts

Tell a Friend about this item

Product Name Price Status Qty
L/A Flex - 370 tip (119g) 1/2D3H $7.99 In Stock
R/S Flex - 370 tip (125g) 3/4B3H $7.99 In Stock
Shaft Service - Add. Cost
Please specify hosel depth, playing length and club head type in the "Notes" at Checkout

Pureing 1-3 $15.50
4+ $13.50
Tip & Butt Trimming $4.95
Tip Prepping $2.95
  • Product Description
  • Reviews
  • Questions & Answers
True Temper Multi Step Lite Steel Iron Shafts

The True Temper Multi Step Lite steel iron shaft was designed with a unique step pattern that promotes a higher launch angle.

  • .370" tip diameter
  • Extended parallel tip section allows multiple trimming options for a wide variety of golfers

Trimming Instructions

True Temper Multi Step Lite Steel Iron Shaft Specifications

True Temper Multi Step Lite Steel Iron Shafts is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Fantastic I just reshafted a sand wedge for my 12 year old nephew with the Multi Step Lite shaft. The shaft was installed with a bit less than ladies flex and a assembled length of 34.25 inches. The performance of this club is outstanding. I play a stiff to extra stiff shaft and hit this club with precision. My nephew hit almost every ball high with a soft landing. I still can't get over it. I highly recommend this shaft.
Date published: 2011-05-18
  • 2015-11-27T08:37CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_TT0061, PRD, sort_relevancy
  • clientName_golfworks

I have some Callaway Diablo Edge irons (Regular flex) that my wife is using. Problem being her swing speed is pretty slow. I would say 60-70mph, if that fast. I want to re-shaft the clubs with a shaft that would work well for her. Any suggestions?

Asked by: Johnpjr
If you are looking for a steel shaft the True Temper Multi-Step is the only steel shaft we have that is available in an L flex. It is a good shaft and could work well. In graphite shaft a shaft like our LTech shafts, which we offer in 3 different Ladies flexes could work well. We offer it in a LL flex which is more flexible then a standard Ladies flex. We have a standard L flex and also an A flex which could be used for ladies or Senior Men.
Answered by: JimY
Date published: 2015-11-20

Looking for a steel shaft to repair a Acuity 9 iron. Parallel tip/ .370 inches. Steps are 2 inches. Does Golf Works have anything comparable.?

Asked by: Kibby
2" steps would be the True Temper Command and it would be the type of shaft used in the Acuity clubs.
Answered by: JimY
Date published: 2015-08-24

Are any tapered shafts?

Asked by: fred charley
The Multi-Step shafts are only available in .370" parallel.
Answered by: Admin
Date published: 2015-07-31

will these shafts fit a Mizuno MP 53 irons head?

Asked by: Fiona
The MP53 head requires a taper tip .355 shaft. The TT0061 shaft is a parallel tip .370", so it will not fit the MP53 head. You might look at the XP Series from True Temper, which are available in 3 weight options and are .355" taper tip.
Answered by: GW2002
Date published: 2015-07-19

Hi! I'm looking for a steel stiff shaft for a TaylorMade Burner 2.0 7-iron. The specs on TM's site show the length of this club is 37". However, I'm unsure if this is the length of just the shaft or if it include the iron head. Please help! Thank you!

Asked by: JDR2682
The 37" length listed on the TM web site is for finished length. The shaft length is measured in the playing position after the shaft is installed.
Answered by: Admin
Date published: 2015-04-06

Do you have a steel shaft that cross references to the 85 gram Rocket Fuel by Taylor Made??

Asked by: Chester12
I have some spec's from Taylor Made's Speedblade 85 shaft that show you could use either the FST 90 A/R flex if you are needing an R flex or you could use the KBS Tour 90. The KBS Tour 90 matches closer of the two shafts to the Speedblade 85 which I would expect to would be similar to the Rocket Fuel 85.
Answered by: JimY
Date published: 2015-02-09

I want to replace the shaft on an old Macgregor iron from the '70s or '80s. ?How do I tell if I need a shaft with a .370 tip or one with a .355 tip, other than by removing the head and measuring.

Asked by: JEagle
Just from their time frame it is likely that these are .355" taper tip. MacGregor commonly used .355" taper tips. If the shaft has steps you could put a pair of calipers on the shaft right above the ferrule and take a measurement and then slide the calipers up to the first step. If the size is the same, (both measurements .370" then the shaft is parallel tip. If the measurement increases, say to .396" the shaft would be taper tip. If the shafts are Dynamic or Dynamic Golds the steps themselves will measure 1 3/4" if it is a taper tip and 1 7/8" if it is a parallel tip.
Answered by: JimY
Date published: 2014-10-29

Do you have any more of the Bio-Mech

Asked by: Bill O
  • 2015-11-27T08:34CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_TT0061, PRD, sort_recentAnswersFirst
  • clientName_golfworks