SEARCH Search GolfWorks
BRAND
  GolfWorks Canada | Online Catalog | Find the Right Golf Shaft Become a Fan of the GolfWorks
True Temper Dynamic Gold XP95  Steel Iron Shafts



True Temper Dynamic Gold XP95 Steel Iron Shafts

Tell a Friend about this item

Product Name Price Status Qty
R300, 40.0 (#3 Iron) - .355 tip (93g) 3B3H $24.99 In Stock
R300, 39.5 (#4 Iron) - .355 tip (93g) 3B3H $24.99 In Stock
R300, 39.0 (#5 Iron) - .355 tip (93g) 3B3H $24.99 In Stock
R300, 38.5 (#6 Iron) - .355 tip (93g) 3B3H $24.99 In Stock
R300, 38.0 (#7 Iron) - .355 tip (93g) 3B3H $24.99 In Stock
R300, 37.5 (#8 Iron) - .355 tip (93g) 3B3H $24.99 In Stock
R300, 37.0 (#9 Iron) - .355 tip (93g) 3B3H $24.99 In Stock
R300, 36.5 (Wedge) - .355 tip (93g) 3B3H $24.99 In Stock
S300, 40.0 (#3 Iron) - .355 tip (95g) 4B3H $24.99 In Stock
S300, 39.5 (#4 Iron) - .355 tip (95g) 4B3H $24.99 In Stock
S300, 39.0 (#5 Iron) - .355 tip (95g) 4B3H $24.99 In Stock
S300, 38.5 (#6 Iron) - .355 tip (95g) 4B3H $24.99 In Stock
S300, 38.0 (#7 Iron) - .355 tip (95g) 4B3H $24.99 In Stock
S300, 37.5 (#8 iIron) - .355 tip (95g) 4B3H $24.99 In Stock
S300, 37.0 (#9 Iron) - .355 tip (95g) 4B3H $24.99 In Stock
S300, 36.5 (Wedge) - .355 tip (95g) 4B3H $24.99 In Stock
Shaft Service - Add. Cost
Please specify hosel depth, playing length and club head type in the "Notes" at Checkout

Pureing 1-3 $15.50
4+ $13.50
Tip & Butt Trimming $4.95
Tip Prepping $2.95
  • Product Description
  • Reviews
  • Questions & Answers
True Temper Dynamic Gold XP95 Steel Iron Shafts

The new XP Series brings your game inside the ropes by delivering explosive power and distance to every iron in the bag. Robot and player testing has shown an average of 6-8 yards improvement in carry distance with many players seeing double-digit yardage gains. Featuring optimized trajectory in a superlight weight design, the XP shafts are engineered to be the longest and most forgiving steel iron shafts in the game today.

Features:
  • XP95 is an Ultralight shaft (95g) designed to deliver maximum peak trajectory for explosive distance
  • Combines standard and speed steps to ensure the ultimate combination of maximum ball speed and dispersion control.

Trimming Instructions

Dynamic Gold XP Spec sheet


 
True Temper Dynamic Gold XP95 Steel Iron Shafts is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Higher flight I've played them for a month in my 5 iron - PW, and couldn't be happier. My swing speed with driver is around 85 mph, and I was looking for more height and distance with the irons. These shafts have performed as advertised.
Date published: 2015-05-12
  • 2015-05-25T08:05CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_TT0101, PRD, sort_relevancy
  • clientName_golfworks
 

If I order a XP 95 S300 steel shaft and the Rocket Grafalloy graphite shaft do I need pureing, tip/butt trimming and tip prepping if i have a golf shop install the shafts in my exiting clubs?

Asked by: Majorgolfer858
Pureing is an option we would need to do if that is an option you want. Pureing locates the best plane, or position, for the shaft to be installed for consistency. Trimming can be done as well, but if the shop you take them to are experienced, they should be able to tip trim, install and butt trim the shaft to length during the assembly process. We can tip trim, but without having the clubs, we would recommend the assembler cut the clubs to final playing length after installation and before gripping.
Answered by: GW2002
Date published: 2015-04-29

Using the xp Series and a length 1/2 inches shorter than normal, would my lie be #5-62* #6-62.5* #7-63* #8-64*, and #9-65*

Asked by: DonT
The lie angle of your irons will be whatever the lie angle of the heads are. The only way to properly determine the lie angle that is right for you is to do a dynamic lie test, using a lie board. If you shaft your clubs one inch shorter than standard and that is the correct length for you, then do the dynmaic lie test to determine if the lies of the clubs at those lengths need to be adjusted.
Answered by: GW2002
Date published: 2015-04-28

I play XP 95 in my 5-W. I would like to try them in my 2 hybrid. Currently, my 2 measures 40" total length. Should I use a 40" shaft and cut it to length, or use the 38.5" shaft, which should give me a finished length of about 40" without trimming?

Asked by: Steveb
I would recommend using the 40" shaft in your #2 hybrid and then cutting it to final length from the butt end. Note the that the XP95 is a .355" shaft and will need to be shimmed with a SHIM15 if installing into a hybrid with a .370" hosel bore.
Answered by: Admin
Date published: 2015-04-06

good morning I want too buy a Cleveland 60 rtx 588 wedge 2 dot with a xp95 shaft what is the difference between a low bounce and reg bounce

Asked by: Roadrunner
Generally, low bounce would be for firmer sand and turf conditions, and for players with shallow to neutral attack angles. "Regular" bounce would be for normal sand and turf conditions and neutral attack angles. This is very general, as you should also consider the sole width. Wider soles tend to be better for softer conditions and narrower soles are better for firmer conditions.
Answered by: GW2002
Date published: 2015-03-23

I have played the older model XP Tour reg flex. How does the XP95 compare. I am 64 years old and my swing speed is between 80-85 mph.

Asked by: DixieDave
I am 75 years old and have switched to the XP95,reg flex. I find my ball flight is better with more roll out. The weight difference,at 93 gm, was one factor in switching. My swing speed is between 85-90 and found it much easier to control ball flight, direction and distance. I am a club builder at a golf course and have helped some older golfers with the steel weight and distance by switching them to the XP95 series. Hope this helps you.
Answered by: Redstone Bob
Date published: 2015-03-09

Can you install these in Titleist ap 2?

Asked by: Bob P
Yes, the TT0101 XP95 .355 taper tip shafts can be installed in the Titleist AP2 irons.
Answered by: GW2002
Date published: 2015-03-08

What matches up ?now with the Dynamic Gold XP r300 in the true temper line and a possible replacement in the the AreoTech line. I am trying to re shaft some Mizuno JXP 825 pro's

Asked by: CharlieO
If you are referring to the old Dynalite Gold XP r300, the new True Temper XP105 would be a slightly lighter option with similar bend point and tip stiffness. The True Temper XP 115 would be closer in weight, but would be a medium tip stiffness and mid bend point. In the AeroTech line, the SteelFiber 110 would be slightly lighter than the Dynalite Gold XP, and would have a stiffer tip section and higher bend point.
Answered by: GW2002
Date published: 2014-12-30

can you get this shaft in senior regular?

Asked by: Troy
No the XP is not available in a Senior flex (A flex). You could soft step the shafts in installation by 2 clubs and this would soften the flex by a half a flex. This means installing the 3 iron shaft (40") into the 5 iron and the 4 iron shaft into the 6 iron and so on down the line. When you butt cut to your finished length the shaft (R300) would play a half a flex more flexible or between an A and R flex.
Answered by: JimY
Date published: 2014-12-01
  • 2015-05-26T07:34CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_TT0101, PRD, sort_recentAnswersFirst
  • clientName_golfworks