SEARCH Search GolfWorks
BRAND
  GolfWorks Canada | Online Catalog | Find the Right Golf Shaft Become a Fan of the GolfWorks
True Temper Double Bend Steel Putter Shafts



True Temper Double Bend Steel Putter Shafts

Tell a Friend about this item

Product Name Price Status Qty
0in RH/LH offset - 370 tip (122g) 38" $13.99 In Stock
1/4in RH offset - 370 tip (122g) 38" $10.99 In Stock
3/8in RH offset - 370 tip (122g) 38" $10.99 In Stock
3/8in LH offset - 370 tip (122g) 38" $10.99 In Stock
1/2in RH offset - 370 tip (122g) 38" $10.99 In Stock
Shaft Service - Add. Cost
Please specify hosel depth, playing length and club head type in the "Notes" at Checkout

Tip & Butt Trimming $4.95
Tip Prepping $2.95
  • Product Description
  • Reviews
  • Questions & Answers
True Temper Double Bend Steel Putter Shafts

The True Temper Double Bend putter shaft comes in multiple offsets to fit your putting needs - perfect for OEM replacement.

Features:
  • .370" tip diameter
  • Available in 0" RH / LH, 1/4" RH, 3/8" RH / LH, 1/2" RH, and variable RH / LH offset

Trimming Instructions


 
AccessDeniedAccess Denied34DCD259780AB4F5QF3oE2+n1o8LQQGikl9eM9PTQQitmZuX3D0HsZQFlTQwbXpBNdCjP/sgxE5PG9Sd5Tj+6CCsq1U=
 

Does this shaft fit the original Scotty Cameron Futura?

Asked by: CockyBear
The Cameron Futura takes a custom bend double bend shaft. We do not have a stock shaft that will fit the Futura but we can do the custom bend shaft. Contact our Customer Service department and they will be able to help you. 1-800-848-8358
Answered by: JimY
Date published: 2015-04-13

I am looking to reshaft a scotty cameron futura x. scotty cameron's site indicates a full shaft offset...what does that equate to 3/8" offset?

Asked by: jnemo
3/8" is equal to .375". The diameter of the shaft at the tip end is .370". The double bend shafts that we stock do not fit the Futura but we can do a custom bend shaft. If you contact customer service they can get you taken care of.
Answered by: JimY
Date published: 2015-02-23

what is the lie angle ? 73 degrees ?

Asked by: hank415
Installed properly in a 90 deg. bore should give you a lie angle of approximately 72 degrees.
Answered by: GW2002
Date published: 2015-04-05

What shaft is used in the Bettinardi Kuchar Model 1 putter and is it available at GolfWorks or a putter with same specs.

Asked by: Frank 717
The Arm Lock Bettinardi putter that is used by Matt Kuchar is manufactured to be used as an arm lock putter. It is not a normal putter head where the shaft was bent to create the specifications. I sent an email to Bettinardi Golf asking about the Kuchar putter and this is the reply I received. "The neck on the Kuchar Amr Lock is not at 90* angle. It's milled forward to allow for the 7* of loft at 71* lie angle and the shaft is a custom bend to allow the putter face to sit face balanced. We do not offer a shaft that would install into a stock putter and create the Kuchar arm lock style putter.
Answered by: JimY
Date published: 2015-01-27

on putter shafts that are dubble bent what is the off set ? ? ?you can have a 0 1/4 3/8 what is that

Asked by: Lance
The 0", 1/4", 3/8" and 1/2" are the amount of offset that these shafts will create when installed to a putter with either a 90 degree bore angle or 90 degree post. With the 0" offset shaft the shaft creates no offset just a 72 degree lie angle when installed into a putter head with a 90 bore angle or post angle. The 1/4", 3/8" and 1/2" are the amounts that the putter head will be offset from the leading edge of the shaft. At this link if you scroll down the page to the description box there are 3 pictures of this putter on the right. The top right hand picture looking at the putter head in the address position shows the off set of the shaft. The offset is the measurement from the leading edge of the shaft to the leading edge of the face. Some companies such as Scotty Cameron will refer to putter shaft offset as 1/2 shaft or full shaft. In the picture here we would have full shaft offset.
Answered by: JimY
Date published: 2015-04-14

Which putter double bend shaft should I order for an Odyssey Rossie Blade circa 1996. ( The original Rossie Blade was right handed only; ?I'm converting one to be left handed ).

Asked by: LouC
The Rossie putters used the Odyssey replacement shaft (TT204102) http://www.golfworks.com/product.asp?pn=TT204102 If you are converting this putter to LH and doing your own 90 degree bore then you would use the (TT1003P) http://www.golfworks.com/product.asp?pn=TT1000P
Answered by: JimY
Date published: 2014-12-05

Will this shaft fit a Titleist Scotty Cameron Red X ?34 x 3 putter?

Asked by: CarlH
The Scotty Cameron Red X 34 x 3 putter used a .355" taper tip double bend. We do not have a stock replacement shaft for this putter. We should be able to do a custom bend putter shaft for this putter but we would require you to send us the head so that we can make sure we get the custom bent shaft set up correctly.
Answered by: JimY
Date published: 2014-11-17

Will the putter shaft shown fit an Odyssey Two Ball Putter

Asked by: Jimmy Mc
No this shaft will not fit the Odyssey 2 Ball Putter. This shaft is designed for a putter head that has a 90 degree bore angle or post angle if over the post installation. The Odyssey 2 Ball Putter is not a 90 degree bore. You will need to use the Odyssey replacement shaft by True Temper (TT204102). http://www.golfworks.com/product.asp?pn=TT204102
Answered by: JimY
Date published: 2014-10-20
  • 2015-04-28T07:42CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_TT1000P, PRD, sort_recentAnswersFirst
  • clientName_golfworks