UST Mamiya MP5/MP6/MP7 Graphite Wood Shafts is rated
5.0 out of
Rated 5 out of
Excellent addition to my fairway woods!I purchased the MP5 shaft and had them installed in my X-hot 3&5 woods, one of the best decisions that I have ever made. My swing speed is 85-95 MPH and this shaft gives me the needed release at the head to but my ball flight long and straight. Great feel and a reasonable priced improvement to stock shafts.
Date published: 2014-09-05
bvseo_cps, prod_bvrr, vn_cps_3.1.3
co_hasreviews, tv_0, tr_1
loc_en_US, sid_US0061, PRD, sort_relevancy
can I use this shaft for my taylor 3 wood
Asked by: T OC
As long as the tip diameter matches the model of TM 3 wood you have, it will work. Tip trimming the US0061 for a #3 wood calls for 1" tip trimming, then trim to final playing length from the butt end after installation.
Answered by: GW2002
Date published: 2015-04-21
I NEED A SENIOR SHAFT FOR A TITLEIST 913 DRIVER. DO YOU SELL SHAFTS THAT ARE BUILT TO FIT THESE DRIVERS??
Asked by: JERRY O
The 913 driver takes a .335 tip shaft, so any of the shafts we carry with that tip diamter will fit. The majority of the wood shafts we carry are .335.
Answered by: GW2002
Date published: 2015-02-16
hello. I currently play UST Mamiya mp5 a flex shafts in my irons(love them) Looking to replace driver shaft with something similar. hit driver around 190 yds. 7 iron about 145 yds. any suggestions?
Asked by: dannyl
I would suggest looking at the MP5 Wood Shaft in an R flex if that is what you are playing in your irons. Your distance with the driver is getting board line between the A and R flex.
The UST Gold 55 could be another good choice.
Answered by: JimY
Date published: 2014-12-08
What is the butt diameter of the Mamiya MP6?
Asked by: Eddy
The MP6 R flex is .606, S flex is .608 and the X flex is .610.
Answered by: Admin
Date published: 2014-10-28
I am a present having a change to my K15 ?ping s/reg by an ex tour fitter.swing speed 67mph.the shaft he is fitting is MP5 lite,and he will be shortening the shaft as he measured my old shaft and it is longer than should have been,is this a good move?
Asked by: rabbit
I replaced a stiff shaft on a Calloway Razor Fit driver, adjustable , and had the UST Mamita MP5 R/Flex 51g 3.7 torque 243 gpm 4.0 tip Parallel .335" OD. Can you explain to me what all the means. as to low torque flex ect. Thank You ..Gary Scott