Project X 95 Flighted Steel Iron Shafts

Project X 95 Flighted Steel Iron Shafts


95 Flighted 5.0 - 40.0" .355 tip (101gm) 3.5B2H -
$37.99
In Stock
95 Flighted 6.5 - 37.0" .355 tip (106gm) 5B2H -
$37.99
Backordered
95 Flighted 6.5 - 38.0" .355 tip (106gm) 5B2H -
$37.99
In Stock
95 Flighted 6.5 - 38.5" .355 tip (106gm) 5B2H -
$37.99
In Stock
95 Flighted 6.5 - 39.5" .355 tip (106gm) 5B2H -
$37.99
Backordered
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Project X 95 Flighted Steel Iron Shafts

The new Project X Flighted 95 is the lightest steel shaft in the Project X Family. The mid-flight design of this new shaft delivers the tour-caliber control expected of the Project X brand with maximum distance. Project X engineers have incorporated descending weight properties into Project X 95 for enhanced feel in the mid to short irons.

Trimming Instructions

 Project X 95 Flighted Shaft Specifications

Project X 95 Flighted Steel Iron Shafts is rated 4.6 out of 5 by 2516.
Rated 5 out of 5 by from Good shaft Put this shaft into x forged head with great results. Much better feel than the stock pxi shaft. Experimented with different flexes to get the one that best suited. The small amount of extra weight than other lightweight steel shafts that I have used gave me slightly higher swingweight and helped with feel distance and control. Highly recommend
Date published: 2013-12-28
Rated 5 out of 5 by from Nice Never got along w/ Px shafts - too harsh. But got to hit this in 6.0 combined with Callaway X Hot and X Hot pro heads. Wow, this shaft is the real deal. It wants to be swung and be used. Nice feel too! Px, IMO, plays a little stout, so check your ego and get the right flex.
Date published: 2013-06-13
Rated 5 out of 5 by from Project x95 I used these shafts with the adams cb2 heads all last season. Fantastic shaft, greatly helped my accuracy, distance was the same as previous shaft. Feel, to me was fantastic, a lot of people will say that project x shaft feel harsh. The px95 did not feel harsh at all.
Date published: 2014-03-22
Rated 4 out of 5 by from Great light weight option Good lightweight option if u are looking for consistency of steel but the weight and feel of graphite.
Date published: 2016-09-18
  • y_2016, m_11, d_24, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_2515
  • loc_en_US, sid_TT0098, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Are these shafts good for me ?  I am 67, 60 yrs. of golf & a 14-15 hdcp .

Asked by: Whollybully
This shaft is designed to produce a mid to mid/low ball flight. As a reference Royal Precision called the 5.0 flex an R+ flex and 5.5 an S flex. If the playing characteristics and shaft weight fit your needs it could be a good shaft.
Answered by: JimY
Date published: 2016-10-31

Need a set of shafts for a set of ping anser clubs  5-pw .355 tapered tip  Have been hitting 5.5 flex  Would you have a set of shafts in 5.5 or 5.0 

Asked by: Drhodes1983
The Project X 95 Flighted shafts have been discontinued and we no longer have any sets of these shafts available.
Answered by: JimY
Date published: 2016-08-08

Hi,purchasing shafts for the first time. X95 is reflecting standard length 40", unlike other models defined by various length as per club. Please advise , thank you , So that we can place order onto you.

Asked by: GSNanda
The TT0098 is a .355" taper tip shaft and there would be a specific length shaft for each iron. The 40" raw length shaft is the 3 iron shaft. The Project X 95 Flighted is being discontinued and we no longer have all the shafts available for a full set of irons. The lengths you see listed are the ones we have left in stock.
Answered by: JimY
Date published: 2016-07-25

I need a 95 6.0 shaft to replace on a Taylor Made RocketBladez PW. Do you know what size I would need?

Asked by: JohnK2374
The Project X Flighted 95 shafts are being discontinued and we no longer have any 6.0 flexes in stock. What we have listed at this link is what we have left in stock. The Rocket Bladz irons use a .370" tip diameter shaft.
Answered by: JimY
Date published: 2016-06-21

Why were these shafts discontinued? Aren't they fairly new to the market?

Asked by: Bozo
They were discontinued by Royal Precision and I do not have any specific information from them as to why they were discontinued. Generally products are discontinued because of lack of sales.
Answered by: JimY
Date published: 2016-06-20

Do you have a set of project x 95 flighted. 5.0 irons shafts 3-pw.

Asked by: Drhodes
Sorry but we do not have any 5.0 Project X 95 Flighted shafts left in stock. This shaft has been discontinued and we will not be getting any more in stock.
Answered by: JimY
Date published: 2016-05-25

Do you have X 95 6.0 shaft labels for sale? If so, what is the cost for a doz?

Asked by: Holloywood
The Project X 95 Flighted Iron shafts come with the shaft bands already installed. You will need to check with our Customer Service department to see if we might have some of these available.
Answered by: JimY
Date published: 2016-04-29

Can you get these in a 4.5?

Asked by: Dennis
The Project X 95 Flighted shafts have been discontinued by Royal Precision but they never did manufacture this shaft in a 4.5 flex.
Answered by: JimY
Date published: 2016-04-28
  • 2016-12-03T07:51CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_22
  • loc_en_US, sid_TT0098, PRD, sort_recentAnswersFirst
  • clientName_golfworks