Project X Graphite Wood Shafts

Project X Graphite Wood Shafts

5.0 - 335 tip (60g) 3.5B2M
In Stock
5.5 - 335 tip (62g) 4B2M
In Stock
6.0 - 335 tip (66g) 4.5B1M
In Stock
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
Tip Prepping

Project X Graphite Wood Shafts

The Project X graphite wood shaft was engineered using True Temper's proprietary Zonal Design Theory (ZDT) to optimize performance in the butt, mid and tip sections of the golf shaft.

  • .335" tip diameter
  • Constant taper shaft design eliminates localized bending for maximum energy transfer
  • Provides penetrating launch conditions with ultra low spin rate

Trimming Instructions

Project X Graphite Wood Shaft Specifications

Project X Graphite Wood Shafts is rated 3.75 out of 5 by 4.
Rated 5 out of 5 by from Great Shaft I bought this shaft to reduce the spin rate of my drives from almost 4000 rpm to about 3000rpm. I love how this shaft releases at the right moment but I hooked the ball with my Titleist 910 D3 in the draw setting. I changed it to a neutral setting and now my drive went from 255 yds( Diamana Ahina shaft) to 275 plus yds (Project X 6.5). Fix your swing, get your numbers, find the right shaft for you.
Date published: 2012-06-06
Rated 4 out of 5 by from Ping G30 Driver I had this particular shaft in a previous driver and was excellent so I purchased it for my Ping G30 and it appeared to have more flex than I liked. Never the less I am keeping it in case my swing speed reduces.
Date published: 2015-12-31
Rated 1 out of 5 by from Project X Black 6.5 Ordered this shaft as an upgrade from Ping for my G 30 Driver. Not a very good shaft. I had a pro shop check the specs and they were way off. The specs worked out to be the same as a regular not stiff.
Date published: 2015-02-07
Rated 5 out of 5 by from Great Shaft I have used the project X shafts for a few years. I'm a long time fan of Royal Shafts and very glad to see true temper company maintain the same quality.
Date published: 2015-07-08
  • 2016-08-25T09:23CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_TT0062, PRD, sort_relevancy
  • clientName_golfworks

I have a TM RBZ stage 2 fairway wood 3 15 ° can i use project X 5.5 shaft ?

Asked by: snofla
The RBZ Stage 2 3 wood used a .350" tip diameter shaft. You would need to use the BB9065 shaft adaptor to install the .335" tip diameter Project X 5.5 shaft into the RBZ Stage 2 3 wood.
Answered by: JimY
Date published: 2016-08-22

Is project x 5.5 equal to regular/r flex shaft

Asked by: Coach
The 5.5 is the S flex. 5.0 is between an R and S flex and 6.0 is between an S and X flex. A 4.5 would have been the R flex.
Answered by: JimY
Date published: 2016-08-10

I'm looking for the project x black hybrid shaft. It's for a Ping i25 hybrid. Tip size .355 is near impossible to find. Want a quality shaft.

Asked by: C new
The Project X Black Hybrid shaft was discontinued at the end of 2014 and we no longer have any of them in stock.
Answered by: JimY
Date published: 2016-08-08

I have a 2015 Callaway XR 10.5 degree driver head. I always use a regular flex due to my swing speed and my fitting results. The driver came with a Project X stiff flex. Which Project X shaft should I buy from you for the regular flex?

Asked by: Rob
The 5.0 is the R flex.
Answered by: JimY
Date published: 2016-08-03

I have a Taylormade M2 w/Fujikura Pro50 Reg flex. 55yrs old, 5 handicap w/96 mph.Can't work the ball. Normal ball flight straight or slight draw. Hitting nothing but cuts. Feels boardish. Hitting Project X 5.5 PX in 3 wood. Considering same for driver?

Asked by: Rick
I would certainly consider the Project X 5.5 for the driver. If you normal shot with your previous driver was straight to a slight draw I would certainly consider using another one of those shafts if it is still available.
Answered by: JimY
Date published: 2016-07-26

Is 5.0 considered a light regular flex. I also need the ping adapter to replace the existing shaft.

Asked by: Duke
In the graphite shaft it was considered an R flex. In the steel shafts 5.0 was considered a firm R flex. If you have the Ping G30 or G you will need the PGC002 shaft adapter and if you have the I25, G25 or Anser you will need the PGC001 shaft adaptor
Answered by: JimY
Date published: 2016-07-11

At the top of this page the MPF rating for the 5.5 shaft is 3.5B2M, but at the bottom of the page the same shaft shows an MPF of 4B2M. Is it a mistake, or do the different ratings reflect different model years or shafts? Which is correct? [Also for 5.0]

Asked by: Mike
In the information I have from Royal Precision they call a 5.0 and R+ flex, which would make it the 3.5B2M. That would follow the specifications in the spec's box at the bottom of the page and our catalog. I will have the order information at the top of page corrected. The shafts have not changed.
Answered by: JimY
Date published: 2016-06-21

I placed a project x 5.0 regular shaft in my Callaway Razr Fit driver, but had to remove 1 inch off the butt end to make the club legal length and would like to use same shaft in my 3 & 5 wood. Can I cut 4-5 inches off butt end or recommend another shaft?

Asked by: bfg
The trimming instructions for the Project X wood shaft would tell you to first cut 1/2" from the tip of the shaft for the 3 wood and 1" from the tip of the shaft for the 5 wood. You would then cut them from the butt end to your finished length. Yes you will cut more from the butt end but if the clubs are assemble to a normal standard length and swingweight the shafts will play true to their listed flex. At this link scroll down the page to the Wood Trim Code and follow code W2 for the Project X wood shaft.
Answered by: JimY
Date published: 2016-06-21
  • 2016-08-25T09:31CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_34
  • loc_en_US, sid_TT0062, PRD, sort_recentAnswersFirst
  • clientName_golfworks