Project X Graphite Wood Shafts

Project X Graphite Wood Shafts


5.0 - 335 tip (60g) 3.5B2M
$59.99
Backordered
5.5 - 335 tip (62g) 4B2M
$59.99
In Stock
6.0 - 335 tip (66g) 4.5B1M
$59.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Project X Graphite Wood Shafts

The Project X graphite wood shaft was engineered using True Temper's proprietary Zonal Design Theory (ZDT) to optimize performance in the butt, mid and tip sections of the golf shaft.

Features:
  • .335" tip diameter
  • Constant taper shaft design eliminates localized bending for maximum energy transfer
  • Provides penetrating launch conditions with ultra low spin rate

Trimming Instructions

Project X Graphite Wood Shaft Specifications

Project X Graphite Wood Shafts is rated 4.2 out of 5 by 6.
Rated 5 out of 5 by from Great Shaft I bought this shaft to reduce the spin rate of my drives from almost 4000 rpm to about 3000rpm. I love how this shaft releases at the right moment but I hooked the ball with my Titleist 910 D3 in the draw setting. I changed it to a neutral setting and now my drive went from 255 yds( Diamana Ahina shaft) to 275 plus yds (Project X 6.5). Fix your swing, get your numbers, find the right shaft for you.
Date published: 2012-06-06
Rated 4 out of 5 by from Ping G30 Driver I had this particular shaft in a previous driver and was excellent so I purchased it for my Ping G30 and it appeared to have more flex than I liked. Never the less I am keeping it in case my swing speed reduces.
Date published: 2015-12-31
Rated 5 out of 5 by from Project X 6.0 I had played the 5.5 in two Adams hybrids and they really performed well. So, I decided to takeout the $200+ wholesale shaft and try the $59.99. It really has worked great with extra roll and flatter ball flight.
Date published: 2016-10-06
Rated 1 out of 5 by from Project X Black 6.5 Ordered this shaft as an upgrade from Ping for my G 30 Driver. Not a very good shaft. I had a pro shop check the specs and they were way off. The specs worked out to be the same as a regular not stiff.
Date published: 2015-02-07
Rated 5 out of 5 by from Great golf shaft I bought the 5.0 to replace the Project X Tour(reg) shaft on my Callaway driver and 3 wood. I am a senior golfer and wanted a little more flex in the shaft. It was the perfect change.
Date published: 2016-09-28
Rated 5 out of 5 by from Great Shaft I have used the project X shafts for a few years. I'm a long time fan of Royal Shafts and very glad to see true temper company maintain the same quality.
Date published: 2015-07-08
  • y_2016, m_12, d_9, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_TT0062, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Hello, can you tell me some of the differences between an Fuji Speeder 57 and a Project X PX v 6.0 both in a stiff flex and their quality. For use in a Taylor Made SLDR mini driver. Thanks

Asked by: GOLFMAN
The Speeder 57 was a shaft made exclusively for Taylor Made and I do not have any specifications other then the weight which was in the 57 gram weight range. I would expect if to be a mid bend point shaft with mid range torque. There was a Project X Pxv that was designed for Callaway that was a mid bend point that weighted 60 grams for the S flex. If this is the shaft you are asking about it should play similar to the Speeder 57. Quality from one manufacture to the other on this type of shaft would be very similar, and both are very good graphite shaft manufactures. We stocked the Project X Pxv Tour 52, which was designed for a higher ball flight and the Project X Pxv Tour 70 which was designed for a low ball flight. The numbers represent the approximate shaft weights.
Answered by: JimY
Date published: 2016-11-30

Looking for a 4.5 a flex project x driver shaft

Asked by: Ron
Royal Precision does not make the Project X graphite wood shaft in a 4.5 flex for the aftermarket.
Answered by: JimY
Date published: 2016-11-29

I have a black 5.5 project X in my ping I20 driver and love it.  I would like to duplicate that feel in my ping G30 3 wood. The picture of the shaft looks blue? What info do you need for me to place order? I at least need the ping adapter  and maybe puri

Asked by: Robman
There use to be a Black Project X shaft that was different then the Blue Project X. The Black Project X was discontinued. The Black Project X was a high bend point stiff tip shaft designed for a lower ball flight and the Blue Project X is a mid bend point medium tip stiffness for a mid ball flight. The G30 uses the PGC002 shaft adapter. http://www.golfworks.com/ping-g30-series-shaft-adaptor/p/PGC002/
Answered by: JimY
Date published: 2016-11-28

does the project x 5.5 graphite driver shaft come with the adapter on it to fit a cobra bio cell smart pad or pro driver I,m a 74 year old former tour player that needs a regular shaft now my current 6.0 shaft is 62 g

Asked by: tom 3
You would need to order the Cobra shaft adapter separately. The BB9079 shaft adapter will work with the drivers you have. http://www.golfworks.com/the-golfworks-universal-cobra-adaptors/p/BB9079/
Answered by: JimY
Date published: 2016-11-21

I usually use a stiff flex shaft. I was wondering if I order an extra stiff shaft and leave it an inch longer than standard for an extra stiff, would that have the same characteristics as a stiff since its longer. Like to chock down for control & feel.

Asked by: Boro
No this will not quite work this way. Making the shaft longer does not make it that much more flexible. The butt end of the shaft is the stiffest end so when you make it longer you increase the length from the stiffest end. At 1" longer the shaft will get a little more flexible but not a full flex. More like a quarter to half a flex more flexible. I would lean more towards using the S flex shaft and tipping it 1/2" more then what is recommended and then making it your 1" longer as a way of maintaining the S flex.
Answered by: JimY
Date published: 2016-11-01

Can you tell me the flex of the 5.0,5.5,&6.0 shafts? Do they make a senior shaft?

Asked by: tom
They do not offer a Senior flex in the Project X graphite wood shaft. 5.0 is an R+ flex, 5.5 is an S flex and 6.0 is an S+ flex.
Answered by: JimY
Date published: 2016-10-31

I would love to order a shaft with a Tour Edge E8 adapter, do you carry the Tour Edge adapters?

Asked by: Boro
We do not carry the Tour Edge shaft adapters.
Answered by: JimY
Date published: 2016-10-31

I need to replace my imix fubuki tour reg 63  shaft for my callaway razor hawk driver.  Having trouble finding the imix shafts and need to find a shaft that matches its specs.  Thank you in advance for your help.

Asked by: Gman
A shaft like the Diamana S+ (MR0034) could match up pretty well to the older Fubuki Tour 63 Regular flex. http://www.golfworks.com/mitsubishi-rayon-diamana-s-graphite-wood-shaft/p/MR0034/
Answered by: JimY
Date published: 2016-10-17
  • 2016-12-10T08:04CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_47
  • loc_en_US, sid_TT0062, PRD, sort_recentAnswersFirst
  • clientName_golfworks