Project X Rifle Steel Iron Set

Project X Rifle Steel Iron Set

1-3 $15.50
4+ $13.50
Tip & Butt Trimming
Tip Prepping

Project X Rifle Steel Iron Set

The Project X Rifle steel iron shaft produces a slightly higher launch angle and penetrating flight pattern. (Services reflect set pricing)

  • .355" and .370" tip diameters available
  • Features a long taper rate that actually achieves a more dynamic transfer of shaft energy to the ball.
  • Sold as set #3-PW

Trimming Instructions

Project X Rifle Steel Iron Set is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from THE shaft for low handicappers This shaft is one of the best feeling shafts on the market. If you are truly looking for a high performance shaft, this is the one you want! Feels like no other shaft on the market and also performs like no other! Do yourself a favor and try these shafts. You will never go back to any other!
Date published: 2007-10-13
Rated 5 out of 5 by from Best on market!!! Best shaft ever. I have the Flighted 6.0 and the feeling is so good and so smooth that you will loved! You have to tri it!!!
Date published: 2007-10-18
  • y_2016, m_12, d_9, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_RPXISET, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What's the weight of project X 5.5

Asked by: Fearless
They are listed at 115 grams. You can see all the specifications for these shafts by scrolling down the page at this link to the specifications box.
Answered by: JimY
Date published: 2016-07-06

I'm looking at Project X (non flighted) 5.5 iron shafts @115g for 3-PW.  I want the shafts uncut, but do not see a way to get them into the cart for checkout.  

Asked by: Greg Snowden
You need to use the code TRPXISET. You will find them at this link.
Answered by: JimY
Date published: 2016-01-19

Hello! I`interesting in project rifle shaft. My club head speed is about 85 mph, so  which shaft is best for me 5,0 or 5,5? regards: Juha Kaunisto

Asked by: citizen kane
If 85 mph is your driver swingspeed then Royal Precision would recommend the 5.0 flex. If the 85 mph is your 5 iron swingspeed then they would recommend the 5.5 flex.
Answered by: JimY
Date published: 2015-08-24

What're recommended swing sped ranges for the project x 6.0 and 6.5. Would alsolikethe same info for the matrix white tie x and s flexes. 

Asked by: Karp
Swing speed guidelines for the 6.0 is 95-110 mph. 6.5 would be 110+. Both of those frequencies are for players with very quick and aggressive swing characteristics. The Ozik X4 White Tie stiff flex would be recommended for players in the 90-100 mph swing speed. The X flex would be best suited at swing speeds of 110 +
Answered by: Kevin F
Date published: 2015-04-09

I play the x100 in my ping irons, how does the PX 6.5 compare? Is this a shaft I could play? I'm a High ball hitter which I like and my 7 iron as is 88 ish....... Thsnks

Asked by: johnny201
The PX 6.5 is the flex equivalent to the Dynamic Gold X100. the flex should fit you well
Answered by: Kevin F
Date published: 2015-04-09

I play x100 in My ping i20 irons, looking at a set of callaway x forged irons but they have project x 6.5 in them. I'm around 110ish mph with my 7 and have an average carry of 165, just curious if these shafts would work for me.... Thank you 

Asked by: johnny201
The Project X 6.5 is equivalent to your Dynamic Gold X100 shaft flex.The Project X should perform well for you.
Answered by: Kevin F
Date published: 2015-04-06

Hi what would be the benefits of fitting project x 6.5 shafts to my ping g20 irons over the standard shafts ? regards Thomas Calvert ,COCKATOO AUSTRALIA.

Asked by: TOMMO
The stock steel shaft from Ping in the G20 irons was listed as the CFS which compared to the Project X 6.5 is approximately 10 grams lighter in weight and designed to produce a higher ball flight. The Project X is designed to produce a lower ball flight. If using a heavier shaft that flights the ball lower would be a benefit to you over the stock shaft then the Project X could be a benefit to you.
Answered by: JimY
Date published: 2015-02-24

Do you still offer the Project X flighted shaft? The only one I see is the flighted 95, im looking for the flighted 6.0 or 6.5. What is the cost for a set?

Asked by: Adam
The Rifle Project X Flighted was discontinued by Royal Precision but we do still have some sets of 6.0 and 6.5 in stock in parallel tip and 6.0 in taper tip. The ordering code is R14SET for both the parallel and taper tip.
Answered by: JimY
Date published: 2015-01-07
  • 2016-12-10T08:06CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_RPXISET, PRD, sort_recentAnswersFirst
  • clientName_golfworks