Search Results

The industry standard tape for installing slip-on or leather grips.

Quick, easy way to remove a large number of reusable golf grips!

.370" Iron Ferrules with Color Trim Rings

The GolfWorks Maximum Strength Quick Set Epoxy is the ONLY 5 minute epoxy available recommended for standard club assembly

Shaft manufacturers employ various methods of measuring shaft flex, and some shaft models vary in flex considerably from shaft to shaft.

A great addition to any shop or den for displaying golf clubs!

Ideal for marking raw shafts to be cut and of course, for marking golf balls!

Inexpensive Tool to Measure swingweight quickly and accurately.

The Maltby Design Ruler is the most accurate club length ruler ever made, specifically designed for the club maker that demands perfection.

Save valuable time and improve consistency of your regrips with the GolfWorks all inclusive Gripping Station.

A dispenser to handle 2 sided grip tape and build-up tape

Clean tape and residue from inside the grip before reinstalling.

The most complete gripping station available. Integrated unit that allows you to remove and install grips at one station.-

Please Note: Additional shipping charges required due to weight.

Measures swingweight quickly and accurately.

Designed for custom clubmakers, use this tool to obtain consistently accurate measurements for tip and length trimming.

Formulated to match the peel and shear strength of premium 3M® epoxies only with more elastic qualities specifically needed for proper golf club head/shaft adhesion, at about half the cost. NOTE: An Epoxy Gun and 2:1 Plunger are required for proper dispensing.

Safely removes grips from any golf club allowing the grip to be re-used.

Great product for cleaning the inside of the hosel.

This ruler not only measures shaft length, it tells you how to do the job!

Use these steel shaft butt extensions to extend shafts and increase the length of clubs.

Makes installing grips on any shaft, regardless of the shaft butt diameter, a cinch!

The easiest way to clean out hosels.

The industry standard tape for installing slip-on rubber, synthetic or leather grips.

A great tool for counterbalancing steel shafted woods, irons and putters.

These pins are specifically designed for finishing graphite and steel shafts used on bore-through wood heads.

The GolfWorks offers graphite extensions for standard or ultralite shafts.

This durable, heavy duty professional shaft clamp is easy to use.

The GolfWorks FlexClean Re-Usable Epoxy Mixing Boards

Non Toxic Paste that safeguards vital parts of the golf club that can be destroyed by heat or open flames.

Eliminate off-center shaft assembly and ensure a proper epoxy bond with our Quik Center assembly aid.

The GolfWorks Epoxy Applicator Sticks (100 count) specifically sized to fit inside golf club hosels.

Lightweight shaft butt extensions made from strong maple wood for steel and graphite shafts.

Safe and efficient grip removal tool. The Rhino grip will quickly and safely remove any style grip.

Made from unbreakable steel. Torque handle included. Now also includes Standard Clubmakers Vise Jaws. Also available separately to retrofit existing units - Please Note: Additional shipping charges required due to weight.

Rubber Tungsten Swingweight Tape - 10 Pack.

The GolfWorks Double Bend Assembly Jig takes all the “guess” work out of those difficult double bend putter assembly jobs.

This handy tool saves you time and energy when stripping grip tape off a club.

Measures all three important gripping dimensions — grip size, shaft butt size, and grip size under the right hand.

A great value! Complete kit for safely heating golf clubs for shaft extraction.

Secures to the front of your workbench and saves shafts and clubs from toppling over.

The Maximum Strength High Impact epoxy is formulated for the high volume clubmaker to gel in approximately 1 hour. NOTE: An Epoxy Gun and 2:1 Plunger are required for proper dispensing.

This clamp is an absolute necessity for securing clubs into a vise for re-gripping and re-shafting.

A must have tool for removing shaft rattles and adding powdered weight down a golf shaft.

Makes turning ferrules fast and simple!

Lead Powder can be used down the shaft or with a butt weight port to fine tune swingweight of any golf club

This is, without question, the best solution to fitting shafts into larger hosels. Keep a selection in your toolbox and you'll never be without a solution!

Quickly measures loft and lie of woods or irons. Our Golf Club Protractor is perfect for reading loft and lie measurements.

A must have tool for reshafting and identifying almost any shaft.

25-35 minute gel time. Specially formulated with a longer gel time than regular Tour Set Epoxy.

This high-impact, high-strength epoxy is specifically formulated for clubmakers

The GolfWorks hosel cleaning system is ideal for all hosel cleaning necessities.

Head Tac instantly stops those annoying rattles in metal woods and can be used to safely add weight to metal woods.

Protects your painted metal woods from scratches

Ideal for the hobbiest or small repair shop to properly extract graphite golf shafts

The Maltby Iron / Hybrid Bending Machine will quickly and accurately bend any iron and also safely bend most hybrid models.

Serves as a replacement for manufacturer's plugs. Prevents epoxy from working its way into the clubhead, causing rattles.

Easily bend putters with double bend putter shafts

Digital Dial Calipers with large LED display is a must have tool for any shop.

Non-Abrasive Formula. Non-Toxic and Non-Flammable. Flitz Paste Metal Polish is a concentrated cream that is unequaled in its ability to Clean, Polish, Deoxidize and Protect.

Aluminum oxide wheel removes deep nicks and scratches from metal surfaces.

Use of these wheels with the correct compounds and the Scotchbrite finishing belt allows a mirror finish to be easily applied to steel and titanium club heads.

Helps you see if the angle of the tool's shaft is too upright or too flat - or just right!

Use of these wheels with the correct compounds and the Scotchbrite finishing belt allows a mirror finish to be easily applied to steel and titanium club heads.

Stop annoying head rattles instantly!

A must for all shops! Specially designed Scotchbrite wheel used for finish polishing after scratches have been removed

Removes the blueing from chrome or stainless hosels discolored during reshafting.

12 minute Gel Time. Tour Set epoxy combines the strength of long-cure epoxies with the conveniences of shorter cure epoxies.

Universal in size, protects club heads from heat during shaft removal.

Vertical and horizontal center of gravity points are key to the performance of club heads.

All the convenience and bonding strength of the standard Tour Set, but with a gel time of 25-35 minutes.

This book may be small, but it's packed with information on how to get more out of your golf clubs to help improve your golf game.

Accurately mix insert and shafting epoxy with these inexpensive measuring cups. Marked in grams, ounces, milliliters and tablespoons.

A quick and accurate tool to measure club lengths on irons, woods, wedges and putters.

The GolfWorks Quick Grip is a must have tool for any repair shop.

These are popular, nylon framed glasses with side sheilds.

Epoxy Dispensing Cartridge Gun with 1:1 Plunger

Protect your clothes with this attractive, durable shop apron.

The most efficient way to custom fit the length of a putter to the golfer.

The industry standard tape for installing slip-on rubber, synthetic or leather grips.

A set of the most commonly used drill bits complete with a sturdy holder conveniently marked with each bit size.

Removes discoloration from over heating on chrome or stainless iron and wood hosels quickly and easily

Removes discoloration from over heating on chrome or stainless iron and wood hosels quickly and easily

The only way to accurately measure golf club specifications

The best water-activated tape available. Tape is slippery when wet and extremely tacky when it dries. Best of all, it holds the grip firmly in place under temperature extremes, resisting twisting and slipping.

A real timesaver! Precut strips of 2" double-coated tape for use in gripping.

This single-coated, masking tape is used for building up grip sizes. Each wrap adds about .006" thickness.

The best water-activated tape available.

An economical alternative to the Professional Golf Club Gauge, this model incorporates many of its features - Please Note: Additional shipping charges required due to weight.

The safest and easiest way to install rubber grips!

When assembling clubheads these real Glass Shafting Beads can ensure that the golf shaft will be properly centered in the hosel.

Check your scoring line depth for a performance improvement!

Acetone will melt broken or cracked ferrules and color rings back together.

The best tool to safely clamp any size steel golf shaft

The oversized dimensions of 14" wide by 233/4" in length make this the most durable and reliable lie fitting board available.

An economical, yet durable shaft extractor with a constant 4-in clamp pressure.

No more grip solvent splattering on the workbench and the floor!

A heavy-duty version of the Original Lock Tight. The clamping surface is lengthened for added gripping power.

Use for solvents, oils, thinners and most other liquids. 8 oz. capacity.

Do you know the loft of your Putter? It matters!!

Machined with four of the most common loft angles for drivers, this gauge is an easy, quick check loft gauge that is much easier to use than traditional protractors.

Uniquely simple, but incredibly effective and easy to use, this new 5-iron Loft Gauge is a must for all clubmakers.

Use the Pro Lever-Action for quick and secure clamping during re-gripping.

Hold heads for reaming or boring with the non-marring aluminum clamping jaws.

Tour Set Epoxy combines the strength of long-cure epoxies with the conveniences of shorter cure epoxies.

Mounts to any work bench and securely holds the grip in place during the grip removal process.

1" x 30" and 1" x 42" Sanding Belts. Available in 3 grits — coarse, medium and fine.

Optional base allows vise to be extended 12" from workbench!

The Universal Shaft extensions will work with almost any steel or graphite shaft.