Tapered Tip Iron Ferrules . .355"

Tapered Tip Iron Ferrules . .355"


65TI Dozen - Black Std .355" Iron Ferrule
$2.49
In Stock
65TI Single - Black Std .355" Iron Ferrule
$0.35
In Stock
66TI Dozen - Black Long .355" Iron Ferrule
$2.49
In Stock
66TI Single - Black Long .355" Iron Ferrule
$0.35
In Stock
67TI Dozen - Black X-Long .355" Iron Ferrule
$2.49
In Stock
67TI Single - Black X-Long 67TI .355" Iron Ferrule
$0.35
In Stock
75TI Dozen - Black/Chrome Long .355" Iron Ferrule
$3.99
In Stock
75TI Single - Black/Chrome Long .355" Iron Ferrule
$0.50
In Stock
76TI Dozen - Black/Gold Long .355" Iron Ferrule
$3.99
In Stock
76TI Single - Black/Gold Long .355" Iron Ferrule
$0.50
In Stock
Dozen Rubber O-Rings
$2.25
In Stock
Single Rubber O-Ring
$0.35
In Stock

We Also Recommend

Tapered Tip Iron Ferrules . .355"

HUGE?FERRULE?SELECTION! A complete selection of ferrules with modern outside diameters that match perfectly to the outside diameter of our hosels. All ferrules have a 19° countersink which allows a cushion of epoxy to form between the top of the hosel and the inside of the ferrule, strengthening the bond. Each ferrule also is “pre-washed,” arriving at your shop with a high-gloss finish and no need for an acetone wipe to make it shine!Choose iron ferrules from standard to XX-long lengths. Available as single ferrules or buy ferrules by the dozen.

AccessDeniedAccess Denied8EA3DE76CBE58AE6pigksF3JbwGEfrEtiuRvi+yAIkrEdAyuRc0nczeru2ypUWMpFOLFGEfhFFR9B9QzvBNSyggYGUc=

Which ferrule would I need for a vokey wedge on a KBS c taper 355 shaft?

Asked by: Sgb1000
Actually the Titleist ferrules BB9063 should also work for the Vokey Wedges. http://www.golfworks.com/the-golfworks-ap1-ap2-355-iron-ferrule/p/BB9063/ In the stock taper tip ferrules the 66TI would be the closest match. Personally I use the 61PI ferrules. Even though the shafts are .355" taper tip they taper out to approximately .370" where the shaft exits the top of the hosel so .370" ferrules will fit and generally match the outside diameter closer then the taper tip ferrules.
Answered by: JimY
Date published: 2016-07-11

Which size ferrule would I need for a vokey wedge with a KBS c taper 355 tip diameter shaft

Asked by: Sgb1000
Actually the Titleist ferrules BB9063 should also work for the Vokey Wedges. http://www.golfworks.com/the-golfworks-ap1-ap2-355-iron-ferrule/p/BB9063/ In the stock taper tip ferrules the 66TI would be the closest match. Personally I use the 61PI ferrules. Even though the shafts are .355" taper tip they taper out to approximately .370" where the shaft exits the top of the hosel so .370" ferrules will fit and generally match the outside diameter closer then the taper tip ferrules.
Answered by: JimY
Date published: 2016-07-11

What would be the best ferrule for reshafting the new Ping I E .335 taper tip irons?

Asked by: Smiley
The Ping iron ferrule BB9047 for the I20 irons would work with the Ping I irons as well. http://www.golfworks.com/ping-anser-i-20-355-iron-ferrules/p/BB9047/
Answered by: JimY
Date published: 2016-07-06

What is the length of a 75TI Ferrule ?

Asked by: Shack
75TI measures .875".
Answered by: JimY
Date published: 2016-07-06

Do you have a right size OD ferrule for Mizuno JPX 850 Forged Iron 0.355 steel shaft? Thanks

Asked by: Duck
Actually you would be better to use a .370" ferrule. The outside diameter (OD) will fit closer to the OD of the JPX 850 iron hosel. .355" taper tip shafts taper out to approximately .370" where the shaft exits the top of the hosel so the .370" ferrules will fit. You will still likely need to do a little sizing and finishing, even Mizuno has to do that. A ferrule like our 61PI looks to be a good match to the stock Mizuno ferrule. http://www.golfworks.com/golf-club-iron-ferrules-black/p/60PI/
Answered by: JimY
Date published: 2016-06-22

Are Taper Tip Iron Ferrules .355" the correct fit for Titleist AP1 714 Irons? I am installing taper tip graphite shafts.

Asked by: Swatz
We have the BB9063 Titleist ferrules for the AP1's and AP2's .355" taper tip shafts. http://www.golfworks.com/the-golfworks-ap1-ap2-355-iron-ferrule/p/BB9063/
Answered by: JimY
Date published: 2016-06-21

I got the new king cobra forged f6 iron with r-coil shaft , what size ferrule I will need ? ( I want color ferrule)  Thanks

Asked by: Nunis
You would use a .370" parallel tip ferrule like the BB0008 collared ferrule for the Cobra F6 irons. http://www.golfworks.com/collared-golf-club-ferrules/p/BB0001/
Answered by: JimY
Date published: 2016-06-20

I am re-shafting my rocket blades tour irons what ferrule do you recommend?

Asked by: Mnewnham
Even though these irons use a .355" taper tip you can use a .370" ferrule. Taper tip shafts taper out to approximately .370" where the shaft exits the top of the hosel. The outside diameter of the .370" ferrules will fit the outside hosel diameter closer then the taper tip ferrules. Most of the pictures I look at show a ferrule that looks like our 52PI with a single chrome ring at the top. However any .370" ferrule will work.
Answered by: JimY
Date published: 2016-05-25
  • 2016-07-23T07:48CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_34
  • loc_en_US, sid_65TIS, PRD, sort_recentAnswersFirst
  • clientName_golfworks