TaylorMade R11 S, R11 and R9 Shaft Adaptor Sleeve

TaylorMade R11 S, R11 and R9 Shaft Adaptor Sleeve


TaylorMade R11 & R11 S Adaptor - RH .335" - 3 Degree Offset
$14.99
In Stock
TaylorMade R11 & R11 S Adaptor - LH .335" - 3 Degree Offset
$14.99
In Stock

TaylorMade R11 S, R11 and R9 Shaft Adaptor Sleeve

Factory adjustable adaptor replacement sleeves for the TaylorMade™ R11 S driver. Also fits the R11 metal woods increasing loft/lie adjustability by 1 degree. Other than replacing a defective Adaptor, the Adaptor Sleeves can also be used to create multiple shaft options for the TaylorMade R11 S driver for less than the cost of simply reshafting your current shaft sleeve.

  • Available in RH .335" and LH - .335" and .350"
  • 3 degree offset
  • Ferrule is pre-assembled for easy assembly

TaylorMade R11 S, R11 and R9 Shaft Adaptor Sleeve is rated 5.0 out of 5 by 8.
Rated 5 out of 5 by from Perfect for an alternate driver shaft Perfect for providing an alternative shaft for my driver and experimenting with a stiffer flex.
Date published: 2015-06-19
Rated 5 out of 5 by from Customer request Customer wanted a more flexible shaft for his R11s driver so rather than distroying the adapter, we just added a shaft.
Date published: 2016-06-02
Rated 5 out of 5 by from The part I need Thank you for quick shipping your company is very fast, I will order more equipment
Date published: 2015-08-30
Rated 5 out of 5 by from Perfect Fast shipping great product. Will consider Golf Works in the future!
Date published: 2015-12-28
Rated 5 out of 5 by from Great Great product great service I will be a returning customer
Date published: 2016-05-17
Rated 5 out of 5 by from As advertised Adapter was in new condition and arrived very quickly
Date published: 2016-05-02
Rated 5 out of 5 by from Work as how it was mend to be It was delivered on time, no problems whats to ever
Date published: 2016-07-20
Rated 5 out of 5 by from great product Always an excellent quality and outstanding service
Date published: 2015-06-04
  • 2016-08-27T07:58CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_TM0016, PRD, sort_relevancy
  • clientName_golfworks

Will this adaptor fit a FCT R-9 Driver. If not where can I find one.

Asked by: JimR
Yes the TM0016 will fit your R9 driver. It is only offered in .335" so you will need to make sure the shaft you are using is .335" tip.
Answered by: Brent Dill
Date published: 2016-08-19

Does the FCT sleeve fit for the R15 rescue?

Asked by: Steven
No the TM0016 adaptor will not fit the R15 Rescue. The TM0016 is for .335" tip diameter wood shafts and the R15 Rescue uses a .370" tip size shaft. We do not stock a shaft adaptor for the R15 Rescue. We should be able to special order an aftermarket shaft adaptor for the R15 Rescue. You would need to contact our Customer Service Department at golfworks@golfworks.com or by calling 1-800-848-8358 and they will help you.
Answered by: JimY
Date published: 2016-08-12

Does the shaft adaptor sleeve come with the screw

Asked by: Big jon
No the adaptor does not come with the screw. We do sell the screw (BB9024). http://www.golfworks.com/taylormade-adaptor-replacement-screw/p/BB9024/
Answered by: JimY
Date published: 2016-08-09

Will the adapter for the R11 and rR9 work with all R9's. I have a R9 Superdeep tp.

Asked by: Brybran
Originally in 2011 we stocked one Taylor Made shaft adaptor that would fit all these drivers. In 2013 Taylor Made introduced a separate shaft adaptor for the Superdeep and Super Tri. We no longer have these adaptors in stock. From what I can tell it looks like the setting were different but that the TM0016 shaft adaptor should fit the Superdeep tp.
Answered by: JimY
Date published: 2016-08-01

I WANT TO TAKE THE SHAFT W/ ADAPTER ATTACHED FROM R11 DRIVER AND PUT IT INTO A R9. WILL THIS WORK? ARE THERE ANY OTHER TM DRIVER SHAFTS W/ ADAPTERS THAT I CAN O THIS WITH?

Asked by: HAL
Thanks Jim. I think The older RBZ should work as well...?
Answered by: HAL
Date published: 2016-07-13

Does this adapter sleeve fit fct rescue 4 wood

Asked by: Pono330
No the TM0016 will not fit the FCT Rescue. The Rescue uses a .370" tip diameter shaft and we do not stock a shaft adapter that will fit the FCT Rescue. We can possibly special order and aftermarket shaft adapter for this club. You would need to contact our Customer Service at golfworks@golfworks.com or by calling 1-800-848-8358.
Answered by: JimY
Date published: 2016-06-09

The guy at Dicks Sporting Goods referred me to you guys. I have an R5 dual driver with a Taylor Made stiff shaft. I was given an R11 S clubhead. Is this adapter piece the one I need to be able to mount the R11 s head on my existing shaft? Thank you

Asked by: Ddietz12
The Taylor Made R5 Dual used a .350" tip diameter shaft. We do not stock a shaft adaptor for the Taylor Made R11S for a .350" tip diameter shaft. We possibly can special order an aftermarket shaft adaptor for the R11S that will accept a .350" shaft. You will need to contact our Customer Service Department at golfworks@golfworks.com or by calling 1-800-848-8358.
Answered by: JimY
Date published: 2016-06-02

The guy from Dicks Sporting Goods referred me to you guys. I have an R5 dual driver and shaft and someone gave me an R11 S driver head. Is this the only piece i need to mount the R11 head to my existing shaft? Thank you

Asked by: Ddietz12
The Taylor Made R5 Dual used a .350" tip diameter shaft. We do not stock a shaft adaptor for the Taylor Made R11S for a .350" tip diameter shaft. We possibly can special order an aftermarket shaft adaptor for the R11S that will accept a .350" shaft. You will need to contact our Customer Service Department at golfworks@golfworks.com or by calling 1-800-848-8358.
Answered by: JimY
Date published: 2016-06-02
  • 2016-08-27T08:09CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_38
  • loc_en_US, sid_TM0016, PRD, sort_recentAnswersFirst
  • clientName_golfworks