The GolfWorks Economy Swingweight Scale

The GolfWorks Economy Swingweight Scale

Economy Swingweight Scale
In Stock

The GolfWorks Economy Swingweight Scale

Measures swingweight quickly and accurately. Easy to use and move off the workbench when you are done! An economical choice for low to medium volume work.
The GolfWorks Economy Swingweight Scale is rated 4.454545454545454 out of 5 by 11.
Rated 1 out of 5 by from Waste of money I had one of the more expensive scales from golf works and used it for over twenty years . We moved and somehow it got tossed. I thought I'd save a little money and get this "economy" scale but it's a piece of junk and I just had to go ahead and order the more expensive one again. Don't waste your money on this one, get the better more expensive one. Anybody want one cheap? I'll never use it except to maybe scrape mud or ice.
Date published: 2016-06-09
Rated 5 out of 5 by from Simple and easy This swingweight scale is very simple and easy to use. Please note that it does not measure total weight, just swingweight. If you are looking for exact measurements, a digital scale might be better, but you should be able to measure swingweight in 1/2 SW increments with this. I'd definitely recommend this for someone wanting to measure swingweight without breaking the bank.
Date published: 2016-08-26
Rated 5 out of 5 by from Does what is suppose to do If you are in the business of collecting expensive fancy tools then this item is not for you. However if you need to insert few grams of weight onto the shaft before you put epoxy to work this is exactly what you need. Cheap and accurate. Remeasured swing weight of all my assembled clubs on fancy expensive golf store scale and they are all exactly as on this cheap one.
Date published: 2016-08-22
Rated 5 out of 5 by from Great scale Have been looking for a swing weight scale for some time. The price was great so I ordered it. Built a set of irone with it and couldn't be more satisfied. Super easy to use. Highly recommend.
Date published: 2016-01-10
Rated 5 out of 5 by from Cheap and accurate! I have a test club that is measured professionally by a Master Clubmaker and documented at D2.5. Yes, 2.5. The economy swing weight tool measure it - exactly D2.5 It's accurate!
Date published: 2016-03-10
Rated 5 out of 5 by from Works great Bought it bc I like to build my own clubs. Tested it against a good scale at my local golftec and everything was dead on. Couldnt ask for anything else especially for the price.
Date published: 2016-07-15
Rated 4 out of 5 by from Economy swingweight scale 100% satisfied. It is very suitable to DIY-er by inexpensive price. you would get more precise measurements with a simple bubbe tube level
Date published: 2016-10-07
Rated 5 out of 5 by from Great, inexpensive Great scale for the money. Just as accurate as more expensive scales. I'd recommend to anyone.
Date published: 2015-11-12
  • 2016-10-23T08:43CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_VSWC, PRD, sort_relevancy
  • clientName_golfworks

The scale in the sliding weight has an arrow if I lying the scale with the club head to my right, Where  the arrow should point to my right or my left

Asked by: Cheito
The Arrow on the Sliding weights should point towards the clubhead.
Answered by: JimY
Date published: 2016-10-20

The GolfWorks Economy Swingweight Scale What is it's size (mainly length) and weight?

Asked by: Brian
The length of the Scale with the weight on the back is 21 3/4". The weight on the back is 3/4". The width of the scale is 1 3/4". The weight is 2 1/8" wide, 1 1/2" long and 1 1/4" tall. The scale weights 3 lbs.
Answered by: JimY
Date published: 2016-10-11

What's the best way to measure swing weight with an ungripped club using this scale before final assembly? Could I use rubber bands to hold grip to shaft?

Asked by: doc
I keep some old split groups that I've taken off other clubs to use for swing weighting.  Make sure they are pressed all the way down on the butt end of the club. I hold them on with a couple rubber bands to simulate the weight of the tape, and to hold them in place.
Answered by: DanWDC
Date published: 2016-05-15

I was thinking about placing a small magnetic bubble level on the scale, in order to precisely measure when it reaches parallel. The bubble level weighs only 8.5g. Where should I attach this level in order to not affect the swingweight measurement?

Asked by: AspiringGolfer
You would want it to straddle the balance point of the scale so that it would not effect a swingweight reading. With this scale you also need to make sure the surface it is sitting on is level.
Answered by: JimY
Date published: 2016-04-11

I see this item is on backorder.  When do you expect it to be available?

Asked by: Don55
We should have them in stock by the end of this week.
Answered by: JimY
Date published: 2016-04-11

Please provide shipping cost of this swing weight scale to Auckland, New Zealand so that I can include the cost when ordering and checking out.

Asked by: Adrian
The Economy Swingweight scale (3lbs) would cost approximately $70 to ship to Auckland via UPS. Shipping via USPS it would cost approximately $50. UPS will take 5-7 business days while USPS will take approximately 2 weeks.
Answered by: Admin
Date published: 2015-05-27

Hi, Do you do international shipping? if so, how much would it cost to ship the "The GolfWorks Economy Swingweight Scale" to the UK?  Thanks Mike

Asked by: Taffrican
The amount can vary depending on the carrier, but UPS Expedited Service (5 to 7 day delivery) would cost approximately $53.00 US.
Answered by: GW2002
Date published: 2014-12-02

I purchased this scale but the graphic doesn't seem to follow the example stated: C-8, D-4.  The slide weight, as depicted, looks like C-3, don't know where D-4 comes from. What are the increments, each equal to 1 ?  (C-1 thru C9 for example). 

Asked by: JKrez17
  • 2016-10-23T08:44CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_VSWC, PRD, sort_recentAnswersFirst
  • clientName_golfworks