The GolfWorks Gripping Station

The GolfWorks Gripping Station

GGS Kit (Includes Tape, Solvent and Grip Gauge)
In Stock
The GolfWorks® GGS Gripping Station
In Stock

The GolfWorks Gripping Station

Save valuable time and improve consistency of your regrips with this well-designed Gripping Station. Built to last under high-volume production, the GolfWorks vise mounted gripping station is compact and easy to use. The alignment bar indexes the leading edge of both right- and left-handed woods and irons, ensuring proper alignment. The quick clamp secures any diameter golf shaft and is safe to use with both graphite and steel shafts. The GolfWorks vise mounted gripping station comes complete with a solvent recovery pan and two tape dispensers - one for each of the double-sided tape and build-up tape. (Vise not included)
The GolfWorks Gripping Station is rated 4.8 out of 5 by 23.
Rated 5 out of 5 by from Great Gripping Station I just got my gripping station today and it was very easy to set it up, and after it was set up I re-grip my Cleveland TA-7 irons all 8 of them with a Lamkin grips that I got from Mr Lamkin long ago. I tell you that this machine made my re-gripping more quicker than just using a regular vise and a rubber insert. I highly recommend that you should get one for yourself if your picky about the way you wanted to grip your own personal golf sticks. I gave this product a 10.
Date published: 2011-09-18
Rated 5 out of 5 by from Perfect Gripping Station Simple, easy and efficient. This is a must have for anyone looking for a cost effective device that makes removing and installing grips a breeze!
Date published: 2013-12-11
Rated 3 out of 5 by from OK for amateur club making I got this device about a month ago for regripping clubs for myself and friends. Been building and regripping clubs for over 30 yrs. The device certainly simplifies the gripping process, although there were no directions included with the unit I got so the red club head locating bracket on the end of the guide rod is useless without some kind of direction. I know it's not rocket science, but without some kind of directions on the intended way to use it, it's almost easier to eyeball for straightness. Also, the angle bracket for clamping in a vice was not included, so I made one at work. As an amateur club maker, I would probably buy it again, however it is overpriced for what you get. If I did this for a living, the quality would not fly.
Date published: 2016-10-25
Rated 5 out of 5 by from Nice, complete station for regripping clubs I've never re-gripped my own clubs before but wanted to save a little money (over time) and have more flexibility on the grips that I buy (not just what the local retailer is offering). Everything went together quickly and worked perfectly in my existing bench vise. The shaft clamp is adjustable so it'll grip about any shaft type or size. I've re-gripped my entire set of clubs so far without any issues.
Date published: 2015-09-09
Rated 5 out of 5 by from Should have purchased this sooner! Simple assembly, easy to use. You can't beat this setup for the price. Wish I had bought this sooner.
Date published: 2013-04-08
Rated 5 out of 5 by from Great product the item is a great purchase and service was terrific
Date published: 2015-12-07
Rated 5 out of 5 by from Makes gripping a breeze I have been repairing/regripping clubs for over 30 years. I delayed ordering a gripping station for some unknown reason until recently. I highly recommend purchasing this item no matter if you are a novice or do repairs on a daily basis.
Date published: 2016-01-12
Rated 5 out of 5 by from Just what I wanted This was just what I expected. A very well built tool to make changing grips a snap.I never changed a grip before. This tool makes it an easy job. I thoroughly enjoyed doing a grip job on my clubs. Thanks. You guys made it easy.
Date published: 2016-06-10
  • y_2016, m_12, d_5, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_23
  • loc_en_US, sid_GGS, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What all comes with the ggs kit?

Asked by: Ritch
It comes with just what you see in the picture except the vise it is mounted in, the tape and the work bench. It includes the clamp, tape dispenser, catch pan and drain tube and alignment bar.
Answered by: JimY
Date published: 2016-11-28

Can the tape dispenser handle double-sided tape? Does it automatically remove the backing?

Asked by: Big AL
The dispenser is set up to handle a roll of 2" masking tape and a roll of 2" double sided tape. No this dispenser does not automatically remove the backing from the double sided tape.
Answered by: JimY
Date published: 2016-09-12

Works with putters?

Asked by: Halscolt
Yes the GGS will work with putters.
Answered by: JimY
Date published: 2016-08-29

ive gone to the diagram page and it is showing up incomplete. I can only see the tape dispenser and nothing else. No assembly and usage instructions were included. Ive tried multiple times to open the schematic you recommended with no success.

Asked by: weazle89
If you would like to send me an email I will scan in the instruction sheet and email it to you. My email is
Answered by: JimY
Date published: 2016-08-16

what is the difference between the ggs kit and the golfworks ggs gripping station

Asked by: Marlin
The GGS Kit includes grip solvent and a grip gauge.
Answered by: JimY
Date published: 2016-08-08

What gripping vise would you recommend for the GolfWorks Grippong Station?

Asked by: Creed
If you are planning on clamping this Gripping Station (GGS) into a Vise the UCMV Universal Vise will work fine. The GGS Gripping Station can also be mounted directly to a work bench.
Answered by: JimY
Date published: 2016-07-21

can the gripping station be mounted to bench

Asked by: vigil95
Yes this gripping station can be mounted to a work bench.
Answered by: JimY
Date published: 2016-06-30

I just purchased a gripping station from you and somewhere I read it could used in a vise on my workbench. There is nothing to clamp on to. Do I have to fabricate something?

Asked by: DHVT
The piece that allows you to clamp the grip station into the vise extends down from the bottom of the shaft clamp. In the past it was always silver. I am not sure if they changed the color of this block with the new color scheme and unfortunately we do not currently have this gripping station in stock for me to verify that. This block that clamps into the vise measures 9/16" thick, the vise jaws clamp against this thickness, 2 3/4" wide or from front to back and 1 3/4" deep, the depth that would go into the vise. If you did not get the piece that allows you to clamp this into the vise you will need to contact Customer Service at 1-800-848-8358.
Answered by: JimY
Date published: 2016-06-06
  • 2016-12-07T08:37CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_44
  • loc_en_US, sid_GGS, PRD, sort_recentAnswersFirst
  • clientName_golfworks