The GolfWorks Maximum Strength Quick Set Epoxy

The GolfWorks Maximum Strength Quick Set Epoxy


Max Strength Quick Set Epoxy 50 ml. Cartridge
$10.99
In Stock
Max Strength Quick Set Epoxy 8oz. (2 4oz bottles) -
$17.99
In Stock

The GolfWorks Maximum Strength Quick Set Epoxy

Recommended By The GolfWorks Staff!

The GolfWorks Maximum Strength Quick Set Epoxy is the strongest “5 minute” epoxy available, specifically formulated for metal wood and iron club assembly. Standard “5 minute” epoxies are only recommended for putter assembly and temporary emergency repairs. With a full cure lap shear strength of 2900 psi and a usable cure time of 15-30 minutes, the Maximum Strength Quick Set eliminates the need for unreliable one part cyanoacrylate adhesives and is much more reliable than standard “5 minute” shafting epoxies with average lap shear strengths of 1500 psi. Maximum Strength Quick Set is black in color with a mix ratio of 1:1. Thumb plunger for dispersion is included with 50ml cartridges.

The GolfWorks Maximum Strength Quick Set Epoxy is rated 4.7 out of 5 by 12.
Rated 5 out of 5 by from Longer shelf life I repair my own clubs and those of others. What I did find Is that the mixer type are great but if a period of time goes by, the harder does not flow well and you get either a bad tube or inaccurate mix. I like these a lot better. When club repair business gets off ground I maybe able to go back but right now this is my best option.
Date published: 2016-10-02
Rated 5 out of 5 by from Great product! I bought this about a week ago. It outperforms similar products. I cemented a tip and an exrension on a driver shaft, one right after the other. It works fast so the running (none) was positioned in opposite directions. 15 minutes to playing strength!
Date published: 2016-10-16
Rated 1 out of 5 by from Fail to cure Bought them 20 months ago. Worked well but now failed. Customer service said there's a one year shelf life once opened. There's no warning on label.
Date published: 2016-10-13
Rated 5 out of 5 by from Excellent Epoxy. I build clubs for long drivers with club head speed in excess of 140 mph. This is my epoxy of choice. No failures a good overnight epoxy.
Date published: 2015-07-28
Rated 5 out of 5 by from The best I have used Not one failure in hundreds of sets built . Set time allows 2-3 clubs at one mix. Ready to hit in 30 minutes. The only epoxy I will use.
Date published: 2015-06-04
Rated 5 out of 5 by from Best Epoxy for clubs Bought this a month ago and it is by far the best epoxy for golf clubs. I was buying the syringe type, but this is much easier to use.
Date published: 2016-07-07
Rated 5 out of 5 by from Quality product Use this item all the time. I can do a set of clubs in an hour and the customer can play within 2 hrs. Great product.
Date published: 2016-11-22
Rated 5 out of 5 by from Excellent product. Easy to use. I have been using the Quick Set Epoxy for over 9 years and have never had a re-shafting job come back.
Date published: 2016-11-17
  • y_2016, m_12, d_7, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_VB1024, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

what is the temperature range for this product?

Asked by: pete
If you contact Customer Service they can email you the SDS (Safety Data Sheet) for this product that has all this information. You can email them at golfworks@golfworks.com.
Answered by: JimY
Date published: 2016-12-05

What color is product afer finished curing?

Asked by: sam
After curing, the color will be black.
Answered by: GW2002
Date published: 2016-09-16

is this a set already? The picture looks like it is..

Asked by: Marcus
Yes the 2 bottles come packaged together, Part A & Part B.
Answered by: JimY
Date published: 2016-08-01

Is this all I need to fix a club? Never have done this so does this come with instructions? What else would I need?

Asked by: Andi
What else you might need depends on just what you need to fix with this golf club. If it is just a shaft that has come loose then epoxy should take care of your needs. Here is a link to instructions on club assembly this might help show you the things you might need. http://www.golfworks.com/images/art/2008HowToBuildClubs.pdf
Answered by: JimY
Date published: 2016-04-04

WHAT IS SHELF LIFE AFTER OPENED

Asked by: GOLFDOTMARK
The epoxy manufactures recommend a shelf life of 1 year.
Answered by: JimY
Date published: 2016-03-01

I just bought max. strength quick set epoxy 50 ml dispenser. I cannot get the thumb plunger to move the dispenser plunger. It seems to be locked in place. Can you help?

Asked by: Harry Morgan
If the plunger will not move at all, even without a cartridge installed, then we probably need to replace the gun for you. It would be best if you contacted customer service and let them know of the problem you are having with the gun. You can mention that I have recommended that you call them. My name is Jim. Without having the gun here it is hard to say for sure what the problem might be. Another option would be for you to send a couple of pictures of the gun to me and we can look at the pictures to see if everything is set up correctly. My email address is jyachinich@golfworks.com.
Answered by: JimY
Date published: 2015-11-17

breakdown temp. wen removing shafts?

Asked by: rexini
350 degrees F.
Answered by: GW2002
Date published: 2015-06-11

temp. breakpoint when removing shaft?

Asked by: rexini
All GolfWorks epoxies start to break down at about 150 degrees.
Answered by: Admin
Date published: 2015-05-07
  • 2016-12-07T08:25CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_VB1024, PRD, sort_recentAnswersFirst
  • clientName_golfworks