The GolfWorks Razr-Fit Shaft Adaptor

The GolfWorks Razr-Fit Shaft Adaptor


Razr Fit, X-Hot Shaft Adaptor - 2 Degree Offset - .335"
$26.99
In Stock

The GolfWorks Razr-Fit Shaft Adaptor

This aftermarket Razr Fit and X-Hot shaft adaptor is precision milled and allows for an additional 1 degree face angle change vs. the factory Razr Fit shaft adaptor. Available in .335" and .350".

Fits:

  • Callaway X Hot
  • Callaway Opti-Fit
  • Callaway Razr Fit
  • Callaway Razr Fit Xtreme

The GolfWorks Razr-Fit Shaft Adaptor is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Works Bought three, used one so far, fits 335 shaft just fine, after prepping shaft tip, and got my old trusty Titleist Graphite Design YS6+ into the adapter, went to put it on Callaway Xtreme head, snug rubber o-ring needed some pushing, but got in there just fine!! Presto, works just fine, fits perfect, allows swaps between (for me) Aldila Trinity it came with, Prolite Red (for lower shots in wind) and now the YS6+ (butt backweighted it too, plus one inch) for distance and carry. got extra Callaway Xtreme driver head on Ebay. Tinkerer Heaven.
Date published: 2016-03-21
Rated 5 out of 5 by from works great I attached an Aldila NVS shaft that I pulled out of another driver and stuck it in my Callaway Razr Fit head. Took it to Fla for vacation and it works great.
Date published: 2015-03-09
  • 2016-07-23T07:44CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_BB9049, PRD, sort_relevancy
  • clientName_golfworks

Will the CA0020 shaft adaptor fit the Callaway XR driver

Asked by: HAW
Yes the CA0020 fits the XR driver.
Answered by: JimY
Date published: 2016-07-20

Will this fit an 815 Great Big Bertha Alpha Fairway or an 816 Great Big Bertha Alpha DBD Driver?

Asked by: Riles
For the Great Big Bertha 815 Alpha Fairway and GBB Alpha DBD driver you need the CA0020 shaft adapter. The BB9049 will not work with these two clubs. http://www.golfworks.com/callaway-advanced-opti-force-shaft-adaptor/p/CA0020/
Answered by: JimY
Date published: 2016-06-24

I want to re-shaft my Callaway X-Hot driver. Seems pretty simple.Do I just prep the shaft tip and install the shaft (with epoxy of course) and let cure? Is there any prep work required to the inside of the adaptor?

Asked by: Todd
Prep the shaft, clean the inside of the adaptor (cotton swab and acetone), let dry, then install the shaft using a high quality shafting epoxy.
Answered by: GW2002
Date published: 2016-05-19

I'm confused. http://www.golfworks.com/images/art/Callaway.pdf states the tip for the 2012 Razr Fit driver is .350. However, here it's stated that the Razr Fit adapter is available in .335 and .350. Why are there two sizes? Which one is correct, and why?

Asked by: Phil
Callaway manufactured the Razr Fit driver with a .350" tip diameter shaft. With the adaptors there is the ability to create a separate adaptor that would accept a .335" tip diameter shaft which more customers prefer. We no longer have the .350" adaptor in stock and will not be getting any more in stock. It has been discontinued. http://www.golfworks.com/the-golfworks-razr-fit-shaft-adaptor/p/BB9049/
Answered by: JimY
Date published: 2016-05-03

will this work on the razor fit extreme

Asked by: Len
Yes the BB9049 does fit the Razor Fit Extreme.
Answered by: JimY
Date published: 2016-03-14

Is the tip of this adaptor removable?

Asked by: Hillska
No the tip on the BB9049 is not removable. We no longer have the Callaway adaptor that had the removable tip. It was replace with the BB9049. If you need the adaptor with the snap on tip or just need the snap on tip we can still special order those for you. You would need to contact Customer Service a golfworks@golfworks.com or by calling 1-800-848-8358.
Answered by: JimY
Date published: 2015-12-17

it is the replacement for Big Bertha fairway wood 2014?

Asked by: partner70
Please refer to Part# CA0020 You may find it below: http://www.golfworks.com/product.asp?pn=CA0020
Answered by: Brent Dill
Date published: 2015-11-06

Can I use the .335 adaptor & Aldila NVS shaft in my Callaway X-hot head that has project x shaft

Asked by: Woody 70
Yes you can use this adaptor with the Aldila NVS shaft for the Callaway X-Hot driver.
Answered by: JimY
Date published: 2015-08-11
  • 2016-07-23T07:52CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_BB9049, PRD, sort_recentAnswersFirst
  • clientName_golfworks