The GolfWorks Regrooving Tool

The GolfWorks Regrooving Tool

Pre 2010 Regrooving Tool
In Stock
New 2010+ Groove Enhancer
In Stock
2010+ Groove Enhancer Blade Only
In Stock

The GolfWorks Regrooving Tool

Deepen or restore worn scoring lines with the New GolfWorks Regrooving Tool. New cutting tip is a coated carbite lathe cutting tool used in machining. This tool is perfectly suited for regrooving. Regrooves all metals commonly used in iron manfacturing. Also great for cleaning out the scoring lines.
AccessDeniedAccess Denied66EF1BB49F276A1EMN/kvsPW9Hs8JANopHOwldEvE8IFtprgwnfoT0QF88oUlKI3TvFKKyvt2MuIZXlNMihuiZUi+FI=

does the tool marked 2010+ conform to the new rules on golf club groove rules? Will it take standard non conforming u-grooves and take the sharper edges off and make them conform to the new rules?

Asked by: David
Yes the 2010+ tool does conform to the new groove rule. It will not take a non-conforming groove and make it a conforming new groove. One of the rules governing grooves is the distance between the grooves and using this tool on an older club and increasing the radius on the top edge of the groove can make the club non conforming based on the distance between the grooves based on how the USGA takes the measurement. The USGA also include a volume restriction with the new grooves which also include the radius on the top edge of the groove. Trying to change the old groove to a new groove will likely make it non conforming on these two points.
Answered by: JimY
Date published: 2016-10-17

how does the regrooving tool work

Asked by: moosew
You use it by hand. You can either drag the cutter through the grooves or push the cutter through the grooves. I find they work better to drag the cutter through the grooves. You want to be able to hold the head very secure. We sell this Iron Rescoring Nest (IRN) for holding the clubhead when regrooving.
Answered by: JimY
Date published: 2016-08-03

whats the difference in grooves wich one is better for spin.... in other words and cant you use either or does it really matter if your just a duffer...but your grooves are worn...

Asked by: patrick
The difference with the different groove cutters is to match up to the grooves that you have in your irons. Per the rules of golf the pre 2010 cutter would create groove that would spin the ball more. If your grooves are getting worn either cutter is going to give you more spin then you are currently getting.
Answered by: JimY
Date published: 2016-04-11

I bought this tool a few months ago and received it there was no instrctions in the packet.  How does it work?

Asked by: Denny
First you want to install the correct cutter for the club model that you have. The brass color cutter for clubs prior to 2010 and the silver color cutter for clubs 2010 and later. Using something to hold the club securely or have a fixture like our Rescoring Nest to hold the club securely helps. You then move the cutter through the grooves to rescore the groove. I find it best to pull or drag the cutter through the groove. Trying to push the cutter through the groove seems to make it easier to slip and scratch or mark the clubface, at least for me.
Answered by: JimY
Date published: 2015-01-07

My clubs are about 6 yrs. old and my hand does shake.  Would I be able to re-groove my Cobra set?  Does it come with the two blades that show.  

Asked by: Jim C
You will probably be ok. Since you have existing grooves to reference and you will be keeping light pressure on the groove tool it should stay in place. I like to pull it along the groove instead of trying to push it through the groove. For me I find this method works better for staying in the groove I am cutting.
Answered by: JimY
Date published: 2014-12-15

Does this post 2010 tool do both U and V grooves?

Asked by: DickErdmann
Yes, the post 2010 Regrooving Tool will clean and sharpen both U and V grooves.
Answered by: Admin
Date published: 2014-10-03

could the 2010+ tool be used to regroove iron heads conforming to the 2009 rules (heads satisfy 2010 depth-width rules, but fail groove edge sharpness). Ultimately, looking for making the heads conforming to the 2010 rules.

Asked by: dim kit
  • 2016-10-21T08:49CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_GW1111, PRD, sort_recentAnswersFirst
  • clientName_golfworks