True Temper Dynamic Gold Spinner Wedge Shafts

True Temper Dynamic Gold Spinner Wedge Shafts


Wedge 37" - .355" tip (124g) 3B1H
$24.99
In Stock
Wedge+ 37" - .355" tip (131g) 4B1H
$24.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper Dynamic Gold Spinner Wedge Shafts

Features:
  • Designed with a revolutionary 3 section below the grip that creates an optimal bending profile for increased spin and lower launch angle.
  • 2 versions (Wedge & Wedge+) for SW/LW and PW/GW applications.
  • Reduces launch angles as much as 2-3 degrees while increasing spin rates by as much as 500+ rpm.
  • .355 tip only

Trimming Instructions

True Temper Shaft Specifications

True Temper Dynamic Gold Spinner Wedge Shafts is rated 5.0 out of 5 by 4.
Rated 5 out of 5 by from Spinner Guilt Oh how sweet it is!! I tried these shafts at the Golfworks Pro Shop on there Virtual Fitting Machine and the results speak ffor themselves. True temper S300 w/ 50* wedge @ 6000RPM's True temper spinner w/ 50* wedge @ 9000+ RPM's, unbelievable??? Believe It!!
Date published: 2011-03-23
Rated 5 out of 5 by from Look at me I'm spinnin I put these shafts on my Tricept MG wedge heads, now I'm a believer! Stop on a dime pitch shots inside of 60yds. Taken my short game to a new level.
Date published: 2015-08-04
Rated 5 out of 5 by from Shaft plus I bought this wedge shaft to use in my 60 degree wedge. I was surprised that my shaft came with a sensicore insert already installed. Pitched in for birdie with the first shot with this shaft.
Date published: 2016-02-26
Rated 5 out of 5 by from nice feel tried it for the last 2 weeks and like the performance
Date published: 2016-03-22
  • 2016-07-25T07:49CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_TT0071, PRD, sort_relevancy
  • clientName_golfworks

Would this shaft fit into my Vokey SM6 wedges and what size ferrule should I use?

Asked by: IanSplis
Yes the Dynamic Gold Spinner Wedge shaft will fit the Vokey SM6 wedges. The BB9063 ferrule should fit the Titleist wedges as well. http://www.golfworks.com/the-golfworks-ap1-ap2-355-iron-ferrule/p/BB9063/
Answered by: JimY
Date published: 2016-07-06

I use  S300 SL shafts in irons, what I have to choose shaft "flex" for AW 50 °, 55 ° SW and LW 60 °? Wedge or Wedge +?

Asked by: Jonathan
Stock wedge shafts are generally S flex or S300 flex as so many wedges use Dynamic Gold shafts. Unless you specifically want a more flexible shaft for your wedges I would recommend using the S300.
Answered by: JimY
Date published: 2016-06-06

I use  S300 SL shafts in irons, what I have to choose shaft for AW 50 °, 55 ° SW and LW 60 °?

Asked by: Jonathan
Assuming the S300 SL shafts are .355 taper tip, and that you play standard or close to standard lengths with your wedges, the 37" S300 SL shaft could be installed all three wedges. Even if you progress the lengths, like 36" on the 50 degree, and 35" on the 55 and 60 degree, you could use the 37 inch shaft. You would install the taper tip shaft and then cut to final length from the butt end.
Answered by: GW2002
Date published: 2016-06-03

Does the DG spinner shaft come with a sensicore insert?

Asked by: Golfer steve
No the DG Spinner does not come with sensicore and because of the shaft design where it get's narrower just below the grip you would not be able to install the sensicore in the DG Spinner. Over the years when I was playing steel shafts I would go to the hardware store and buy #4 corks and epoxy them in the butt end of the shaft to dampen vibration. They work well and would work with the DG Spinner.
Answered by: JimY
Date published: 2016-02-15

I am using S300 shafts in my irons if i am to get the dyna gold spinners for my wedges  what weight should I buy

Asked by: golfaddict
I would suggest that you purchase the Wedge + Spinner Wedge Shaft. The Wedge + option would be closer to weight and flex of the S300 shafts in your irons.
Answered by: Admin
Date published: 2015-02-09

Is there any shaft in your inventory that will replace a Wilson Fat Shaft PW shaft

Asked by: Broken Wedge
No we do not stock a replacement for the Wilson Fat Shaft. These were a larger tip diameter shaft and only available from Wilson. No one that I know of other then Wilson would have a replacement shaft for this club.
Answered by: JimY
Date published: 2015-01-20

Can the Spinner shaft be used in your Tour Grind Wedges? Or is there another Wedge Specific shaft that will fit the .370 hosel?

Asked by: Drowe2817
The DG Spinner shaft is only available in a .355" taper tip. It would have to be shimmed to fit the .370" hosel bore of our Tour Grind Wedges. You can shim the shaft to fit by using the SHIMT, T for taper tip.. It will fill the space between the .355" tip and the .370" hosel bore. http://www.golfworks.com/product.asp_Q_pn_E_SHIM
Answered by: JimY
Date published: 2015-01-05

Is the wedge flex equal to a regular flex and the wedge + equal to a stiff flex? And is the lighter of the two the wedge flex?

Asked by: heyy
Yes, the wedge flex is closer to a standard R flex and the lightest of the two Spinner Wedge shafts. The Wedge + shaft is stiffer and 7 grams heavier than the std. wedge flex.
Answered by: Admin
Date published: 2014-12-15
  • 2016-07-25T07:48CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_TT0071, PRD, sort_recentAnswersFirst
  • clientName_golfworks