True Temper XP95  Steel Iron Shafts

True Temper XP95 Steel Iron Shafts


R300, 40.0 (#3 Iron) - .355 tip (93g) 3B3H
$24.99
In Stock
R300, 39.5 (#4 Iron) - .355 tip (93g) 3B3H
$24.99
In Stock
R300, 39.0 (#5 Iron) - .355 tip (93g) 3B3H
$24.99
In Stock
R300, 38.5 (#6 Iron) - .355 tip (93g) 3B3H
$24.99
In Stock
R300, 38.0 (#7 Iron) - .355 tip (93g) 3B3H
$24.99
In Stock
R300, 37.5 (#8 Iron) - .355 tip (93g) 3B3H
$24.99
In Stock
R300, 37.0 (#9 Iron) - .355 tip (93g) 3B3H
$24.99
In Stock
R300, 36.5 (Wedge) - .355 tip (93g) 3B3H
$24.99
In Stock
S300, 40.0 (#3 Iron) - .355 tip (95g) 4B3H
$24.99
In Stock
S300, 39.5 (#4 Iron) - .355 tip (95g) 4B3H
$24.99
In Stock
S300, 39.0 (#5 Iron) - .355 tip (95g) 4B3H
$24.99
In Stock
S300, 38.5 (#6 Iron) - .355 tip (95g) 4B3H
$24.99
In Stock
S300, 38.0 (#7 Iron) - .355 tip (95g) 4B3H
$24.99
In Stock
S300, 37.5 (#8 iIron) - .355 tip (95g) 4B3H
$24.99
In Stock
S300, 37.0 (#9 Iron) - .355 tip (95g) 4B3H
$24.99
In Stock
S300, 36.5 (Wedge) - .355 tip (95g) 4B3H
$24.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper XP95 Steel Iron Shafts

The new XP Series brings your game inside the ropes by delivering explosive power and distance to every iron in the bag. Robot and player testing has shown an average of 6-8 yards improvement in carry distance with many players seeing double-digit yardage gains. Featuring optimized trajectory in a superlight weight design, the XP shafts are engineered to be the longest and most forgiving steel iron shafts in the game today.

Features:
  • XP95 is an Ultralight shaft (95g) designed to deliver maximum peak trajectory for explosive distance
  • Combines standard and speed steps to ensure the ultimate combination of maximum ball speed and dispersion control.

Trimming Instructions

XP Spec sheet

True Temper Dynamic Gold XP95 Steel Iron Shafts is rated 4.818181818181818 out of 5 by 11.
Rated 5 out of 5 by from good feel I received these 2 weeks and resifted AP1 irons. much lighter with good feel at impact. Did not balloon but was a nice high trajectory.
Date published: 2015-08-24
Rated 5 out of 5 by from Great Supplier Bought xp95 shafts for old Ping i10 irons. Rejuvenated them!
Date published: 2015-12-25
Rated 5 out of 5 by from Great shafts! I bought these a month ago. I previously had the XP 105 in my clubs. I think these XP 95 are a little lighter.....my swing weight for each club went down 1 to 2 swing weights so I am able to swing the club a little quicker and more consistently now. Also the XP 95 has a little higher ball flight which is what I was looking for....easy to order and put together. Very happy.
Date published: 2016-01-30
Rated 3 out of 5 by from Overstated Claims of Distance Gains I have now used the XP95 and the XP90 is several sets of irons. The shafts have a soft feel but launch the ball well. I did not see any increase in distance over other iron shafts. In fact, I'm currently using AMT True Temper shafts in my MB-T irons and see a very acceptable increase in distance but much more feel on all shots. These shafts also hit the ball much straighter which is a huge advantage over the XP series. Everyone is different so much of these advantages for me may be different with different swings.
Date published: 2016-05-27
Rated 5 out of 5 by from Higher flight I've played them for a month in my 5 iron - PW, and couldn't be happier. My swing speed with driver is around 85 mph, and I was looking for more height and distance with the irons. These shafts have performed as advertised.
Date published: 2015-05-12
Rated 5 out of 5 by from Great shafts! I switch from KBS tour shafts to the XP95's and couldn't be more pleased with the performance. Put these shafts in my Titleist CB's and haven't looked back.
Date published: 2016-01-22
Rated 5 out of 5 by from Excellent performing shaft. Another winner for True Temper! Great feel with great performance!
Date published: 2015-06-30
Rated 5 out of 5 by from Great shaft! I have used the X95 shafts in my Mizuno MP-54's irons for 2 weeks now. What a greats difference in my increased distance and my higher launch angle. Very smooth shafts! Shot my best nine holes (38) ever.
Date published: 2016-05-07
  • 2016-07-26T07:44CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_TT0101, PRD, sort_relevancy
  • clientName_golfworks

Question about cutting TT shifts I believe the TT is for tapered tip? Do you strictly butt trim these clubs? I purchased the TT XP 95 355 steel iron shifts but I'm confused how to cut them

Asked by: Cal
TT actually stands for True Temper. The TT0101 XP95 shafts are a .355" taper tip shaft which follow trim code IR1 which is butt cut only. The TT0113 XP95 shafts are a.370" parallel tip and follow trim code IR2 which requires both tip and butt cutting. You can see the trimming instructions at this link and by scrolling down the page to the Iron Trim Code chart. http://www.golfworks.com/images/art/shaft_trim_inst.pdf
Answered by: JimY
Date published: 2016-07-25

Do you carry True Temper XP shafts in a parallel .370 shaft? Your printed catelogue show you have them, but your online site does not?

Asked by: Neb Tiffam
The XP95 is the only one available in a .370" tip diameter. You will find it at this link. http://www.golfworks.com/true-temper-dynamic-gold-xp95-steel-iron-shafts/p/TT0113/
Answered by: JimY
Date published: 2016-07-11

The list shows the 3 iron to be 40" and the 3 iron shaft that I am replacing is 38". It lists all shafts exactly 2" longer than my shafts that I am replacing. Do I simply trim the butt end of the shaft by 2" for each iron. thank you. Chris

Asked by: smittycs
Yes you will install the shaft and cut from the butt end to your finished playing length. Shafts are made to longer raw lengths to accommodate longer finished length clubs.
Answered by: JimY
Date published: 2016-07-11

my club head speed is 85 mph, will the iron shaft xp , s300 .355 ttip 93g be to stiff

Asked by: golfnut
If your swingspeed is 85 mph with say a 5 iron then the S300 should be fine but if you swingspeed is 85 mph with a driver then an R300 flex would be a better choice.
Answered by: JimY
Date published: 2016-06-27

Have played with Titileist AP1  for years love the W thru 8 iron trajectory but begin to have trouble with ,6,5 etc. I presume this is because I'm older and swing speed had dropped. What shaft would you recommend in these irons to improve distance etc.

Asked by: Ron
A shaft like the XP95 could be a good choice to help get some of your swingspeed back. Depending on which flex you are playing you might also want to go to a little more flexible shaft which can help you hit the ball a little higher.
Answered by: JimY
Date published: 2016-05-31

I've had my set of Ping G'5 for 10 years and just had a shaft break. The original shaft was a CS Lite (stiff). What shaft would be most identical to that original? Would it be the XP95 (stiff), XP105 (regular) or another shaft? Thanks.

Asked by: Chris
The CS Lite stiff was listed at 107 grams and was a shaft designed for a higher trajectory. The XP105 would be the closest match in weight, stiffness and playing characteristics.
Answered by: JimY
Date published: 2016-05-31

If I reshafted my ap2's with the Xp 95 reg. from DG s300 how much would it change my swing weight.

Asked by: Sparky887
The general rule of thumb is that a 9 gram change of shaft weight is equal to 1 swingweight. Just doing the math it would be a 3 swingweight change and you would have a lighter swingweight with the XP95's.
Answered by: JimY
Date published: 2016-05-31

Have a set of Rsi 2 with kbs tour 105s , question is are they taper-tip or parallel ?

Asked by: Stick
The Taylor Made RSI 2 irons use a .370" parallel tip shaft. With the XP95 you would use the TT0113 shafts. http://www.golfworks.com/true-temper-dynamic-gold-xp95-steel-iron-shafts/p/TT0113/
Answered by: JimY
Date published: 2016-05-27
  • 2016-07-26T07:49CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_51
  • loc_en_US, sid_TT0101, PRD, sort_recentAnswersFirst
  • clientName_golfworks