True Temper XP95  Steel Iron Shafts

True Temper XP95 Steel Iron Shafts


R300, 40.0 (#3 Iron) - .355 tip (93g) 3B3H
$24.99
In Stock
R300, 39.5 (#4 Iron) - .355 tip (93g) 3B3H
$24.99
In Stock
R300, 39.0 (#5 Iron) - .355 tip (93g) 3B3H
$24.99
In Stock
R300, 38.5 (#6 Iron) - .355 tip (93g) 3B3H
$24.99
In Stock
R300, 38.0 (#7 Iron) - .355 tip (93g) 3B3H
$24.99
In Stock
R300, 37.5 (#8 Iron) - .355 tip (93g) 3B3H
$24.99
In Stock
R300, 37.0 (#9 Iron) - .355 tip (93g) 3B3H
$24.99
In Stock
R300, 36.5 (Wedge) - .355 tip (93g) 3B3H
$24.99
In Stock
S300, 40.0 (#3 Iron) - .355 tip (95g) 4B3H
$24.99
In Stock
S300, 39.5 (#4 Iron) - .355 tip (95g) 4B3H
$24.99
In Stock
S300, 39.0 (#5 Iron) - .355 tip (95g) 4B3H
$24.99
In Stock
S300, 38.5 (#6 Iron) - .355 tip (95g) 4B3H
$24.99
In Stock
S300, 38.0 (#7 Iron) - .355 tip (95g) 4B3H
$24.99
In Stock
S300, 37.5 (#8 iIron) - .355 tip (95g) 4B3H
$24.99
In Stock
S300, 37.0 (#9 Iron) - .355 tip (95g) 4B3H
$24.99
In Stock
S300, 36.5 (Wedge) - .355 tip (95g) 4B3H
$24.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper XP95 Steel Iron Shafts

The new XP Series brings your game inside the ropes by delivering explosive power and distance to every iron in the bag. Robot and player testing has shown an average of 6-8 yards improvement in carry distance with many players seeing double-digit yardage gains. Featuring optimized trajectory in a superlight weight design, the XP shafts are engineered to be the longest and most forgiving steel iron shafts in the game today.

Features:
  • XP95 is an Ultralight shaft (95g) designed to deliver maximum peak trajectory for explosive distance
  • Combines standard and speed steps to ensure the ultimate combination of maximum ball speed and dispersion control.

Trimming Instructions

XP Spec sheet

True Temper Dynamic Gold XP95 Steel Iron Shafts is rated 4.75 out of 5 by 12.
Rated 5 out of 5 by from good feel I received these 2 weeks and resifted AP1 irons. much lighter with good feel at impact. Did not balloon but was a nice high trajectory.
Date published: 2015-08-24
Rated 5 out of 5 by from Great Supplier Bought xp95 shafts for old Ping i10 irons. Rejuvenated them!
Date published: 2015-12-25
Rated 5 out of 5 by from Great shafts! I bought these a month ago. I previously had the XP 105 in my clubs. I think these XP 95 are a little lighter.....my swing weight for each club went down 1 to 2 swing weights so I am able to swing the club a little quicker and more consistently now. Also the XP 95 has a little higher ball flight which is what I was looking for....easy to order and put together. Very happy.
Date published: 2016-01-30
Rated 3 out of 5 by from Overstated Claims of Distance Gains I have now used the XP95 and the XP90 is several sets of irons. The shafts have a soft feel but launch the ball well. I did not see any increase in distance over other iron shafts. In fact, I'm currently using AMT True Temper shafts in my MB-T irons and see a very acceptable increase in distance but much more feel on all shots. These shafts also hit the ball much straighter which is a huge advantage over the XP series. Everyone is different so much of these advantages for me may be different with different swings.
Date published: 2016-05-27
Rated 5 out of 5 by from Higher flight I've played them for a month in my 5 iron - PW, and couldn't be happier. My swing speed with driver is around 85 mph, and I was looking for more height and distance with the irons. These shafts have performed as advertised.
Date published: 2015-05-12
Rated 5 out of 5 by from Great shafts! I switch from KBS tour shafts to the XP95's and couldn't be more pleased with the performance. Put these shafts in my Titleist CB's and haven't looked back.
Date published: 2016-01-22
Rated 5 out of 5 by from Excellent performing shaft. Another winner for True Temper! Great feel with great performance!
Date published: 2015-06-30
Rated 4 out of 5 by from True temper xp95 shaft I ended up having to buy 2 since after installing the first one it was the wrong flex. I ordered stiff and they sent regular, But since I already tip prepped the shaft they wouldn't take it back. So I ordered a second one and got the right flex.
Date published: 2016-09-15
  • 2016-09-27T07:57CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_TT0101, PRD, sort_relevancy
  • clientName_golfworks

i want to extend shaft 1 1/2 inches, xp 95 600 or 580

Asked by: James
The XP95 iron shafts are a .605" butt diameter. You can use the S60 steel shaft extension or the Universal Extension (GW1047).
Answered by: JimY
Date published: 2016-09-12

Is the XP 95 a mid flex or a low flex?

Asked by: Buddy
The XP95 is a low flex or low bend point shaft designed for a high trajectory.
Answered by: JimY
Date published: 2016-08-26

I would like to install the XP95 in Mizuno MP Fli Hi irons #2 and #4, respectively 39.25 and 38.25 inch, finished length. Would the IR1 still apply or would it require tip trimming to fit the Hosel and still get to recommended length ?

Asked by: AUK
For the .355" taper tip version of the XP 95, which would be used in these Mizuno irons, you would still follow IR1. You never tip trim a .355" taper tip shaft when installing into a .350" hosel bore size or the shaft will no longer fit into the hosel bore.
Answered by: JimY
Date published: 2016-08-18

are the tips tapered

Asked by: Radkon
Yes the TT0101 XP95 shafts are a .355" taper tip. http://www.golfworks.ca/true-temper-xp95-steel-iron-shafts/p/TT0101/
Answered by: JimY
Date published: 2016-08-08

Does this shaft com in 2 iron length.  If not, what shaft can I use to reshaft the 2 iron with similar properties of the xp95?

Asked by: Aggie Bob
No, True Temper does not manufacture an XP95 2 iron shaft. You would like still be best off to use the 3 iron shaft in the 2 iron as well. It will still be the closest match and will play approximately a quarter of a flex stiffer. You could also look at the KBS Tour 90 (FS0023) which is similar weight and playing characteristics and is offered in a 2 iron shaft. http://www.golfworks.com/kbs-tour-90-taper-tip-steel-iron-shafts/p/FS0023/
Answered by: JimY
Date published: 2016-08-01

Question about cutting TT shifts I believe the TT is for tapered tip? Do you strictly butt trim these clubs? I purchased the TT XP 95 355 steel iron shifts but I'm confused how to cut them

Asked by: Cal
TT actually stands for True Temper. The TT0101 XP95 shafts are a .355" taper tip shaft which follow trim code IR1 which is butt cut only. The TT0113 XP95 shafts are a.370" parallel tip and follow trim code IR2 which requires both tip and butt cutting. You can see the trimming instructions at this link and by scrolling down the page to the Iron Trim Code chart. http://www.golfworks.com/images/art/shaft_trim_inst.pdf
Answered by: JimY
Date published: 2016-07-25

Do you carry True Temper XP shafts in a parallel .370 shaft? Your printed catelogue show you have them, but your online site does not?

Asked by: Neb Tiffam
The XP95 is the only one available in a .370" tip diameter. You will find it at this link. http://www.golfworks.com/true-temper-dynamic-gold-xp95-steel-iron-shafts/p/TT0113/
Answered by: JimY
Date published: 2016-07-11

The list shows the 3 iron to be 40" and the 3 iron shaft that I am replacing is 38". It lists all shafts exactly 2" longer than my shafts that I am replacing. Do I simply trim the butt end of the shaft by 2" for each iron. thank you. Chris

Asked by: smittycs
Yes you will install the shaft and cut from the butt end to your finished playing length. Shafts are made to longer raw lengths to accommodate longer finished length clubs.
Answered by: JimY
Date published: 2016-07-11
  • 2016-09-27T07:46CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_56
  • loc_en_US, sid_TT0101, PRD, sort_recentAnswersFirst
  • clientName_golfworks