UST Mamiya Competition Graphite Iron Shaft

UST Mamiya Competition Graphite Iron Shaft


L/A Flex - 370 tip (80g) 1/2D3S
$14.99
In Stock
R/S Flex - 370 tip (83g) 3/4B2M
$14.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

UST Mamiya Competition Graphite Iron Shaft

The UST Competition 65 Graphite Iron Shaft - lightweight durable design provides the ultimate club building flexibility.

Features:
  • .370" tip diameter
  • Longer parallel sections and combination flexes can be trimmed to fit a wide variety of golfers
  • L / A flex designated "low kick point" and R / S flex designated "mid kick point"

Trimming Instructions

UST Competition 75 Golf Shaft Specifications

UST Mamiya Competition Graphite Iron Shaft is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from consistant performer I have used the 65 'competition' series for several years repairing clubs for my fellow golfers and have always had very good results and compliments on their performance. Recently, a friend asked to have his steel shafted Callaway irons replaced with the Competition 65 shaft to swing between regular and senior. I accomplished this by down-stepping the 'regular', and it fits his desires perfectly.
Date published: 2016-02-08
Rated 5 out of 5 by from GREAT SHAFT. WOULD RECOMMEND IT TO ALL Absolutely a great shaft. True and very easy to work with and great to hit. Very happy with it and will buy more as needed!
Date published: 2016-08-03
  • 2016-08-26T08:08CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_US0045, PRD, sort_relevancy
  • clientName_golfworks

Do you cut the butt or tip cut the UST iron shafts?

Asked by: Chip
With the US0045 iron shafts you will cut both the tip and butt. You will cut the tip to create the flex for each club number and cut the butt end for the finished length you want the clubs to be.
Answered by: JimY
Date published: 2016-08-15

Need to replace nickent 3DX RC graphite SR 2.5 R flex 75 gram shaft. What low cost shaft do you recommend?

Asked by: Chet
For good inexpensive shafts the UST Competition Series 65, Grafalloy ProCustom (TT202214) and the new Aldalite (AL0061) could all be good choices. http://www.golfworks.com/aldila-aldalite-graphite-wood-shaft-l-flex/p/AL0061/ http://www.golfworks.com/grafalloy-pro-custom-graphite-wood-shaft/p/TT202214/
Answered by: JimY
Date published: 2016-04-29

tip trimming length for 65 series iron shaft i want to trim for stiff flex

Asked by: donny
Trim code for the US0045 R/S combination flex shaft is IR11 for the Stiff flex. IR11 trim code is: 2" tip trim for 3 iron, 2.5" for a 4 iron, 3" for a 5 iron, 3.5" for a 6 iron, 4" for the 7 iron, 4.5" for the 8 iron, and 5" for the 9, PW, 5" maximum tip trim. After tip trimming, trim to final playing length from the butt of the shaft.
Answered by: GW2002
Date published: 2016-03-18

Does the 73gm. rating apply to the stock shaft @42" prior to  the recommended IR3 > 7i. trim ? Additionally does a formula exist to predetermine net weight after tip & butt trim.

Asked by: Jim L
73 grams is the weight of the shaft before it is cut. What I do to calculate a cut weight is to divide the weight of the raw shaft by the raw length. In this case 73 divided by 42 equals 1.738. If I trim 2" off the shaft it I would multiply 1.738 by 40" and it equals 69.52 grams. This will generally be very close.
Answered by: JimY
Date published: 2015-09-04
  • 2016-08-26T08:06CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_US0045, PRD, sort_recentAnswersFirst
  • clientName_golfworks