UST Mamiya Pro Force V2 Graphite Wood Shafts

UST Mamiya Pro Force V2 Graphite Wood Shafts


55A Flex - 335 tip (56g) 2B2M
$59.99
In Stock
55R Flex - 335 tip (57g) 3B2M
$59.99
In Stock
55S Flex - 335 tip (57g) 4B2M
$59.99
In Stock
65R Flex - 335 tip (65g) 3B2H
$59.99
In Stock
65S Flex - 335 tip (66g) 4B2H
$59.99
In Stock
65X Flex - 335 tip (66g) 5B2H
$59.99
In Stock
75S Flex - 335 tip (76g) 4B2H
$59.99
In Stock
75X Flex - 335 tip (76g) 5B2H
$59.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

UST Mamiya Pro Force V2 Graphite Wood Shafts

The UST Proforce V2 graphite wood shaft features a balanced tip section for higher launch, increased ball speed and longer carry off the tee.

Features:
  • .335" and .350" tip diameters available
  • A proven winner on the PGA Tour
  • High modulus material positioned strategically in the shaft for an amazing feel in the hands

Trimming Instructions

UST Mamiya Pro Force V2 Graphite Wood Shafts is rated 4.944444444444445 out of 5 by 18.
Rated 5 out of 5 by from Outstanding Distance and feel! Just received the Taylormade Tour Burner Driver with the V2 shaft (stiff)! What a combination! Gained 20+ yards to my drives! Thank you Neil!
Date published: 2008-07-18
Rated 5 out of 5 by from Great Shaft I used the Proforce V2 55 gram A-Flex shafts in a Maltby PFT 10.5 degree driver and KE4 SSFI 3-metal and could not be happier with the results. I am 66 years old and the A-Flex works great for me. I have increased my distance with both the driver and 3-metal. The flight trajectory is lower with these shafts and this gives me some additional roll. These new clubs have replaced a 2009 Taylormade Burner driver and Burner 3-metal.
Date published: 2010-12-02
Rated 5 out of 5 by from Exceptional performance / value! I have been golfing for over 40 years and been a club maker for over 30. I have tried just about every driver shaft on the market and for me, the best feeling and performing of them all is the Pro Force V2 stiff flex .335 tip. Consistent, smooth and LONG. Without a doubt winner of the best "bang for the buck" award!
Date published: 2016-04-23
Rated 4 out of 5 by from GREAT PRODUCY and CUSTOMER SERVICE Wanted a shaft to get the ball up a little higher.Seems to fit the bill. The only thing I had a problem with, not Golfworks, was shipping USPS Priority is supposed to be 2 days and it took 7 days. No tracking available and USPS seems to be satisfied, 7days is not priority, I'm not satisfied.
Date published: 2015-09-16
Rated 5 out of 5 by from Great Wood Shaft Paired with the Taylormade r7 Superquad driver, the UST ProForce V2 75g shaft is a great match! Kick point, feel and flex all combine to increase my distance and narrow my shot dispersion from the tee. Love the combo!
Date published: 2007-10-03
Rated 5 out of 5 by from Proforce V2 75 R Tried several shafts in search of the best one for my Nike VR Tour 9.5 driver. I finally put the V2 75 reg flex in and all I can say is wow! I'm hitting it longer and straighter than all the other shafts I've tried.
Date published: 2011-10-26
Rated 5 out of 5 by from Best I have found I have tried many different shafts( more and less expensive) and I always seem to come back to the proforce V2. In my opinion this is the most stable, solid feeling, and best performing shaft I have used.
Date published: 2013-07-12
Rated 5 out of 5 by from X-hot reshaft Reshafted my 9.5 degree xhot driver with 55 gram stiff - hiting this very long and with a slight draw. Had the shaft pured and all I can say is WOW - great shaft - thinking now to reshaft my 3 and 5 wood also.
Date published: 2013-08-11
  • 2016-07-29T07:30CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_en_US, sid_US0001W, PRD, sort_relevancy
  • clientName_golfworks

I am using a Diamana 53 gram R shaft on my RBZ driver. What UST V2 be the most comproble to the present shaft.

Asked by: wo3
The UST V2 55 would be the closest match to a Diaman 53.
Answered by: Admin
Date published: 2016-07-28

Hi, I have a King LTD driver and am looking for a light stiff shaft to install in it (also looking for a high launch) would the Proforce V2 fit the bill and also would you be able to install a "MYFLY" 9-12 degree tip adapter on the shaft,I will add grip..

Asked by: Tappy
The ProForce V2 is listed as a Mid trajectory shaft. For a higher trajectory shaft you could look at the UST ProForce Axivcore Black (US0040) or Axivcore Blue (US0037). We can install any of these shafts into a Cobra shaft adaptor CB9023 for you. http://www.golfworks.com/cobra-my-fly-8-driver-adaptors/p/CB9023/
Answered by: JimY
Date published: 2016-07-11

Hi, I'm looking to replace my stock Ping G30SF Tec Tour 65R with a shaft with a softer tip action. Would the V2 55R work? I'm 62 and have lost 25 yards(from 265 to 240)due to age and flexability. I was told my Ping shaft has a stiff tip.

Asked by: Steve
The ProForce V2 55 is listed as a mid trajectory shaft so it would be more of a medium tip stiffness. In a 55 gram UST shaft the Gold 55 (US0081) could be a better choice then the V2 55. http://www.golfworks.com/ust-mamiya-gold-55-graphite-wood-shaft/p/US0081/
Answered by: JimY
Date published: 2016-06-28

I'm looking to put the UST V2 into my 3 wood. Currently I'm using a XR16 pro driver with Aldila 65 pro green. swing speed 98-105 depending, my transitions fairly smooth my release is snappy. Sometimes I snap hook. 75 gram stiff sound correct??

Asked by: Drew
For the fairway wood I like the 75 gram weight shaft. It can help you time and pace your swing a little better and possibly help with that snap hook.
Answered by: JimY
Date published: 2016-06-02

Can you install adapter for M2 driver for the UST Pro Force V2 graphite shaft in 65 S flex and for how much

Asked by: skrapp7
Yes we can do this and for the pricing you will need to contact Customer Service at golfworks@golfworks.com or by calling 1-800-848-8358.
Answered by: JimY
Date published: 2016-05-31

what type of tip do i need for m2 tip

Asked by: skrapp7
You would need the TM0023 shaft adapter for the M2 driver. http://www.golfworks.com/taylormade-m1-m2-r-15-sldr-shaft-adaptor/p/TM0023/
Answered by: JimY
Date published: 2016-05-31

I would like to buy this shaft 66x. Can you grip it with a Z-Cord GP, cut it down so it plays to 44 inches, and tip it with a TM R1 adapter?

Asked by: Geom
Yes, you will need to purchase the grip and the R1 adaptor on the same order as the shaft. You will need add your request to the "Notes" section at checkout. Or, you can call our customer service department and they will place the order for you. 800 848-8358.
Answered by: Admin
Date published: 2016-04-27

Will I need an adaptor for this shaft to put it in a Calloway white hot x2?

Asked by: Hack
Yes, you will need the CA0020 adaptor for the Callaway XHot 2 Driver.
Answered by: GW2002
Date published: 2016-04-27
  • 2016-07-29T07:31CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_32
  • loc_en_US, sid_US0001W, PRD, sort_recentAnswersFirst
  • clientName_golfworks