UST Mamiya Pro Force V2 Graphite Wood Shafts

UST Mamiya Pro Force V2 Graphite Wood Shafts


55A Flex - 335 tip (56g) 2B2M
$49.99
In Stock
55R Flex - 335 tip (57g) 3B2M
$49.99
In Stock
55S Flex - 335 tip (57g) 4B2M
$49.99
In Stock
65R Flex - 335 tip (65g) 3B2H
$49.99
In Stock
65S Flex - 335 tip (66g) 4B2H
$49.99
In Stock
65X Flex - 335 tip (66g) 5B2H
$49.99
In Stock
75S Flex - 335 tip (76g) 4B2H
$49.99
In Stock
75X Flex - 335 tip (76g) 5B2H
$49.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

UST Mamiya Pro Force V2 Graphite Wood Shafts

The UST Proforce V2 graphite wood shaft features a balanced tip section for higher launch, increased ball speed and longer carry off the tee.

Features:
  • .335" and .350" tip diameters available
  • A proven winner on the PGA Tour
  • High modulus material positioned strategically in the shaft for an amazing feel in the hands

Trimming Instructions

UST Mamiya Pro Force V2 Graphite Wood Shafts is rated 5.0 out of 5 by 22.
Rated 5 out of 5 by from Having the shaft PUREd makes a difference Was somewhat concerned about the manufacturer's rated torque for this shaft (3.7 degrees) when I ordered it. However, I wanted to try a shaft less than 60 grams in weight and the V2 was the only one I found in the 50 gram range with the lowest torque rating in your catalog. I was presently surprised when the PUREing process measured it at only 2.8 degrees. Played it for the first time and was very pleased with the results. The dispersion pattern was very good and MUCH better than the shaft that came with my new Callaway XR2. Can work the ball either way with this shaft without over doing the draw or fade as was not the case with the Fujikura shaft that came with the club. Ps: would also be interested in a sub 60 gram S or X mid trag. shaft with even less torque if one becomes available.
Date published: 2016-08-19
Rated 5 out of 5 by from Outstanding Distance and feel! Just received the Taylormade Tour Burner Driver with the V2 shaft (stiff)! What a combination! Gained 20+ yards to my drives! Thank you Neil!
Date published: 2008-07-18
Rated 5 out of 5 by from quality at a great price Paired the X75 to a KE4 St-fd 3 wood at ~38.5", I'm 5'7", and I'm knocking the ball off the deck 240-270 yards. High trajectory the majority of the time, I've never had my swing speed checked, but I assume it is up there. Vast improvement over my Wilson beginner set 3 wood. Probably going to mate one of these to a KE4 ST-2A. That or the tour version with the 1.8 degree torque rating (please get these in stock, the only place I have found them is ebay).
Date published: 2016-10-30
Rated 5 out of 5 by from Great Shaft I used the Proforce V2 55 gram A-Flex shafts in a Maltby PFT 10.5 degree driver and KE4 SSFI 3-metal and could not be happier with the results. I am 66 years old and the A-Flex works great for me. I have increased my distance with both the driver and 3-metal. The flight trajectory is lower with these shafts and this gives me some additional roll. These new clubs have replaced a 2009 Taylormade Burner driver and Burner 3-metal.
Date published: 2010-12-02
Rated 5 out of 5 by from Exceptional performance / value! I have been golfing for over 40 years and been a club maker for over 30. I have tried just about every driver shaft on the market and for me, the best feeling and performing of them all is the Pro Force V2 stiff flex .335 tip. Consistent, smooth and LONG. Without a doubt winner of the best "bang for the buck" award!
Date published: 2016-04-23
Rated 4 out of 5 by from GREAT PRODUCY and CUSTOMER SERVICE Wanted a shaft to get the ball up a little higher.Seems to fit the bill. The only thing I had a problem with, not Golfworks, was shipping USPS Priority is supposed to be 2 days and it took 7 days. No tracking available and USPS seems to be satisfied, 7days is not priority, I'm not satisfied.
Date published: 2015-09-16
Rated 5 out of 5 by from Great Wood Shaft Paired with the Taylormade r7 Superquad driver, the UST ProForce V2 75g shaft is a great match! Kick point, feel and flex all combine to increase my distance and narrow my shot dispersion from the tee. Love the combo!
Date published: 2007-10-03
Rated 5 out of 5 by from Proforce V2 75 R Tried several shafts in search of the best one for my Nike VR Tour 9.5 driver. I finally put the V2 75 reg flex in and all I can say is wow! I'm hitting it longer and straighter than all the other shafts I've tried.
Date published: 2011-10-26
  • y_2016, m_12, d_6, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_22
  • loc_en_US, sid_US0001W, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

V2 75g stiff on a Taylormade M2... how would this feel on the club? Got a V2 from a buddy in a trade for an old 913 for my 815H and I'm thinking about tipping it for Taylormade 

Asked by: Bwilder13
The V2 75g stiff shaft will fit the Taylor Made M2 driver assuming this shaft is a .335" tip diameter wood shaft. As long as the shaft specifications fit your needs it should match well with the M2 driver.
Answered by: JimY
Date published: 2016-12-01

I have a Prolauch 45L(GF347. Tip-.335 46". I would like to know how much do I need to cut off the bottom to make it the same as men's regular. I can add an incert on the top to get my 46" length back.

Asked by: Lonnie
It is not possible to make the ProLaunch Blue 45 L flex play like an R flex by tip trimming. The shaft only has a 2" parallel tip length which would only allow for 1/2" of tip trimming to maintain 1.5" for proper shaft installation. You would have to be able to tip trim this shaft 2" to make the L flex play similar to an R flex. You just cannot tip trim 2" from this shaft. It would not be a safe thing to do.
Answered by: JimY
Date published: 2016-11-29

How do you pure a shaft?

Asked by: Lonnie
Puring a shaft is done in a computerized machine. There is no such thing as a perfectly round and perfectly straight shaft. Puring finds the most stable plane of oscillation so that when the shaft it is installed it will play as if it is perfectly round and straight. Here is a link to he SST Pure web site where you can read more about the process and see a video on how it is check and identified. http://sstpure.com/
Answered by: JimY
Date published: 2016-11-28

Re. UST Pro Force V2 57 gr shaft for my TM Jetspeed driver. Senior player. Avg. SS with driver in the 92-94 range. Should I go for the 55R shaft or the 55S shaft?

Asked by: Knud
We reference an R flex for swingspeeds from 77 to 92 mph and S flex from 93 to 107 mph. If you have a smooth tempo you could probably use the R flex with no problem. Another option would be to use the R flex and tip trim 1/2" for the driver and make the shaft play between an R and S flex.
Answered by: JimY
Date published: 2016-11-23

Can I get a V2 A flex 55g with a .350 tip?

Asked by: Bernie
No, UST does not manufacture the ProForce V2 55g with a .350" tip diameter.
Answered by: JimY
Date published: 2016-11-21

Which shaft would match an R11 Driver stiff 60 gram shaft--the stiff shaft was the original Fujikuro Blur. I would like to try a UST Pro Force V2 Graphite (65R), my swing speed is 93-98. My 3 wood is 70 stiff fujikuro blur would like to try V2 (65R).

Asked by: Roy Smith
The Fujikura Blur 60 was more of a mid to mid/high trajectory shaft. The ProForce V2 is a mid trajectory shaft but still could work well. In the Fujikura line the Pro 63 (FK0081) would likely be the closest replacement to the Blur. The R11 driver used a .350" tip diameter shaft so to install the ProForce V2 it would be best to use the TM0016 Taylor Made shaft adapter to install the new shaft. http://www.golfworks.com/taylormade-r11-s-r11-and-r9-shaft-adaptor-sleeve/p/TM0016/
Answered by: JimY
Date published: 2016-11-11

Does it come with adaptor for callaway hot x driver

Asked by: Pete b
You need to purchase the shaft adaptor (BB9049) separately and it you would like us to install the adaptor you would need to specify that. You can contact our International Trade Accounts Manager, Donna Ours at dours@golfworks.com and she can help you with your order. http://www.golfworks.com/the-golfworks-razr-fit-shaft-adaptor/p/BB9049/
Answered by: JimY
Date published: 2016-11-10

If I new this would fit my hot x driver I would buy it 55a ust graphite

Asked by: Pete b
Yes the ProForce V2 55 A flex shaft will fit the Callaway X Hot driver.
Answered by: JimY
Date published: 2016-11-10
  • 2016-12-07T08:27CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_51
  • loc_en_US, sid_US0001W, PRD, sort_recentAnswersFirst
  • clientName_golfworks