UST Mamiya Pro Force V2 Graphite Wood Shafts

UST Mamiya Pro Force V2 Graphite Wood Shafts

55A Flex - 335 tip (56g) 2B2M
55R Flex - 335 tip (57g) 3B2M
In Stock
55S Flex - 335 tip (57g) 4B2M
In Stock
65R Flex - 335 tip (65g) 3B2H
In Stock
65S Flex - 335 tip (66g) 4B2H
In Stock
65X Flex - 335 tip (66g) 5B2H
In Stock
75S Flex - 335 tip (76g) 4B2H
In Stock
75X Flex - 335 tip (76g) 5B2H
In Stock
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
Tip Prepping

UST Mamiya Pro Force V2 Graphite Wood Shafts

The UST Proforce V2 graphite wood shaft features a balanced tip section for higher launch, increased ball speed and longer carry off the tee.

  • .335" and .350" tip diameters available
  • A proven winner on the PGA Tour
  • High modulus material positioned strategically in the shaft for an amazing feel in the hands

Trimming Instructions

UST Mamiya Pro Force V2 Graphite Wood Shafts is rated 4.947368421052632 out of 5 by 19.
Rated 5 out of 5 by from Having the shaft PUREd makes a difference Was somewhat concerned about the manufacturer's rated torque for this shaft (3.7 degrees) when I ordered it. However, I wanted to try a shaft less than 60 grams in weight and the V2 was the only one I found in the 50 gram range with the lowest torque rating in your catalog. I was presently surprised when the PUREing process measured it at only 2.8 degrees. Played it for the first time and was very pleased with the results. The dispersion pattern was very good and MUCH better than the shaft that came with my new Callaway XR2. Can work the ball either way with this shaft without over doing the draw or fade as was not the case with the Fujikura shaft that came with the club. Ps: would also be interested in a sub 60 gram S or X mid trag. shaft with even less torque if one becomes available.
Date published: 2016-08-19
Rated 5 out of 5 by from Outstanding Distance and feel! Just received the Taylormade Tour Burner Driver with the V2 shaft (stiff)! What a combination! Gained 20+ yards to my drives! Thank you Neil!
Date published: 2008-07-18
Rated 5 out of 5 by from Great Shaft I used the Proforce V2 55 gram A-Flex shafts in a Maltby PFT 10.5 degree driver and KE4 SSFI 3-metal and could not be happier with the results. I am 66 years old and the A-Flex works great for me. I have increased my distance with both the driver and 3-metal. The flight trajectory is lower with these shafts and this gives me some additional roll. These new clubs have replaced a 2009 Taylormade Burner driver and Burner 3-metal.
Date published: 2010-12-02
Rated 5 out of 5 by from Exceptional performance / value! I have been golfing for over 40 years and been a club maker for over 30. I have tried just about every driver shaft on the market and for me, the best feeling and performing of them all is the Pro Force V2 stiff flex .335 tip. Consistent, smooth and LONG. Without a doubt winner of the best "bang for the buck" award!
Date published: 2016-04-23
Rated 4 out of 5 by from GREAT PRODUCY and CUSTOMER SERVICE Wanted a shaft to get the ball up a little higher.Seems to fit the bill. The only thing I had a problem with, not Golfworks, was shipping USPS Priority is supposed to be 2 days and it took 7 days. No tracking available and USPS seems to be satisfied, 7days is not priority, I'm not satisfied.
Date published: 2015-09-16
Rated 5 out of 5 by from Great Wood Shaft Paired with the Taylormade r7 Superquad driver, the UST ProForce V2 75g shaft is a great match! Kick point, feel and flex all combine to increase my distance and narrow my shot dispersion from the tee. Love the combo!
Date published: 2007-10-03
Rated 5 out of 5 by from Proforce V2 75 R Tried several shafts in search of the best one for my Nike VR Tour 9.5 driver. I finally put the V2 75 reg flex in and all I can say is wow! I'm hitting it longer and straighter than all the other shafts I've tried.
Date published: 2011-10-26
Rated 5 out of 5 by from Best I have found I have tried many different shafts( more and less expensive) and I always seem to come back to the proforce V2. In my opinion this is the most stable, solid feeling, and best performing shaft I have used.
Date published: 2013-07-12
  • 2016-10-26T07:58CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_en_US, sid_US0001W, PRD, sort_relevancy
  • clientName_golfworks

I have a Callaway XR 2016 3 wood (Fujikura Speeder Evolution 565 FW stock stiff shaft). The shaft feels "whippy" and have tend to hit a few shots that balloon up in the air. Would this shaft be a good alternative (FYI driver club head speed is ~100 MPH)

Asked by: Jared
Yes the ProForce V2 has always been a good shaft and should help you bring the ball flight down and give you more control. The stock Evolution 565 likely plays more flexible then normal for an S flex and these lighter weight shafts tend to play a little more flexible.
Answered by: JimY
Date published: 2016-10-25

I had a V2 shaft in a Ping I20 driver, long story short had to replace it with something else and not satisfied.  Would I need a adapter?

Asked by: JOHN
The Ping I20 used a .350" tip diameter shaft so you will need to use the BB9048 adapter to install this .335" tip diameter shaft. Order the one marked for .335"
Answered by: JimY
Date published: 2016-10-14

This shaft would be a replacement for an Adams 5 wood Super S Speedline VST.  Will I need an adapter or anything else to make this shaft work?

Asked by: Frank
The Adams Super S Speedline VST used a .335" tip diameter shaft. It just had a standard ferrule with a single chrome trim ring like our 52PW.
Answered by: JimY
Date published: 2016-10-11

Will this shaft fit my 2015 Callaway XR?

Asked by: JERRY
Yes, This shaft will fit your 2015 Callaway XR. Callaway shows it is a .335" tip.
Answered by: Brent Dill
Date published: 2016-10-06

I have a taylormade Rocket RBZ stage 2 driver, would the 55R or 55S shaft be good for this head ?

Asked by: fg54728
Thank you for your helpful answer. Can you please tell me whixh hosel do I need ? Thanks
Answered by: fg54728
Date published: 2016-09-10

I had V2 65g/stiff. Now I have V2 75g/regular. To my surprise I would even say that 75g/regular plays stiffer (gives less kick) than 65/stiff. I have very long smooth swing with smaller load. Will 65/regular combo give me a bit more kick/distance? Thanks

Asked by: Peter
The added weight of the V2 75 gram shaft can make it feel like it plays stiffer but in our own profile shaft test data the V2 75 R flex tested as being more flexible then the V2 65 S flex. We fit R flex shafts in a 77 to 92 mph swingspeed and S flexes in a 93 to 107 mph range. If you just felt the V2 65 S flex was playing to stiff but other wise liked the shaft then the V2 65 R flex should be a good choice.
Answered by: JimY
Date published: 2016-08-25

will this fit my formula 6 krank driver head

Asked by: dave
Yes it will fit. The Formula 6 Krank driver uses a .335" tip diameter shaft.
Answered by: JimY
Date published: 2016-08-24

Had the good fortune to win a 915D2, a 915F3 and a 915H2.  All have stiff shafts.  I'm 70 yrs old and have lost some flexibility.  I hit it straight and my 5 iron is good for 150 yards.  Any recommendations for shafts?

Asked by: Mike46
Shafts like the Xcaliber Tour SL could work well in the driver fairway wood and hybrid. The AS0026 shaft in an A flex for the driver. The AS0029 for the fairway wood and the AS0032 for the hybrid. We get very good feedback from all of these shafts.
Answered by: JimY
Date published: 2016-08-22
  • 2016-10-26T07:51CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_41
  • loc_en_US, sid_US0001W, PRD, sort_recentAnswersFirst
  • clientName_golfworks