UST Mamiya ProForce AXIVCore Blue Graphite Wood Shaft

UST Mamiya ProForce AXIVCore Blue Graphite Wood Shaft


59A Flex - 335 tip (59g) 2D3M
$69.99
In Stock
59R Flex - 335 tip (59g) 3B3M
$69.99
In Stock
59S Flex - 335 tip (59g) 4B3M
$69.99
Backordered
69R Flex - 335 tip (69g) 3B2M
$69.99
In Stock
69S Flex - 335 tip (69g) 4B2M
$69.99
Backordered
69X Flex - 335 tip (69g) 5B2M
$69.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

UST Mamiya ProForce AXIVCore Blue Graphite Wood Shaft

The UST Proforce AXIVCore Blue Graphite Wood Shaft features AXIV Technology - a proprietory "interlinked weave", 4 axis, single ply, carbon composite prepeg.

Features:
  • .335" tip diameter
  • Woven prepreg is more consistent than "layered alternatives."
  • Shape retaining properties provide stability and consistent loading and unloading of the golf shaft.

Trimming Instructions

UST AXIVCore Blue Golf Shaft Specifications

UST Mamiya ProForce AXIVCore Blue Graphite Wood Shaft is rated 3.5 out of 5 by 2.
Rated 5 out of 5 by from GREAT Shaft With its low bend point, the AXIVCore Blue has given me a consistently higher trajectory off the tee and has added 10-15 yards to my drive.
Date published: 2010-05-20
Rated 2 out of 5 by from Weak shaft "Stiff" shaft is not very stiff. More like a regular. Face is wide open causing a low fade with new r1 driver. Even with driver at 12 degrees could not get high launch angle.
Date published: 2013-05-07
  • 2016-08-26T08:08CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_US0037, PRD, sort_relevancy
  • clientName_golfworks

can this shaft be modified ready to install on a ping g30 driver.

Asked by: ralpho
Yes the US0037 shaft can be installed into the Ping G30 driver.
Answered by: JimY
Date published: 2016-06-24

looking for a low kick shaft for my taylormade sldr.

Asked by: buckman
The UST Axivcore Blue is designed to produce a higher ball flight and could work well. Another good shaft for a higher ball flight is the Grafalloy ProLaunch Blue 45 or 65 (TT0106 or TT0107). The Taylor Made SLDR driver used a .350" tip diameter shaft so you would need to install one of these shafts into a new TM0023 shaft adaptor to properly fit the SLDR. http://www.golfworks.com/taylormade-m1-m2-r-15-sldr-shaft-adaptor/p/TM0023/
Answered by: JimY
Date published: 2016-05-23

What is the difference between the AXIVCore Blue and Green shafts?

Asked by: TDW
The Green is designed as a Mid Trajectory shaft and the Blue a High Trajectory shaft.
Answered by: JimY
Date published: 2016-02-08

i have a ping g20 driver with a 9.5 stiff shaft, average drive 240 -255 range,  low to mid ball flight, want a higher traj. &  more roll out, any shaft recommendations  thanks

Asked by: cyr dog
The Axivcore Blue 59 is suppose to produce a high trajectory and possibly could work for you here. The UST MP5 Wood shaft could also work. http://www.golfworks.com/product.asp_Q_pn_E_US0061 We have always had good feedback from the Grafalloy ProLaunch Blue 45 or 65 for creating a little higher ball flight. http://www.golfworks.com/product.asp?pn=TT0106 The Xcaliber 5 RT is another good high launch shaft. http://www.golfworks.com/product.asp?pn=AS0040 The Ping G20 does use a .350" tip diameter shaft so you will need to use the BB9048 ferrule adaptor to size the .335" tip diameter shaft into the .350" hosel bore. Keep in mind the shaft may do what you are looking for but you might also be better with a 10.5 degree driver over the 9.5 degrees.
Answered by: JimY
Date published: 2015-05-15
  • 2016-08-26T08:06CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_US0037, PRD, sort_recentAnswersFirst
  • clientName_golfworks