UST Mamiya Recoil 95 Taper Iron Shafts

UST Mamiya Recoil 95 Taper Iron Shafts


Recoil 95 #2 Iron, R Flex - 355" tip 41.0" (93g) 3B1M -
$44.99
Backordered
Recoil 95 #3 Iron, R Flex - 355" tip 40.5" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #4 Iron, R Flex - 355" tip 40.0" (93g) 3B1M -
$44.99
Backordered
Recoil 95 #5 Iron, R Flex - 355" tip 39.5" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #6 Iron, R Flex - 355" tip 39.0" (93g) 3B1M -
$44.99
Backordered
Recoil 95 #7 Iron, R Flex - 355" tip 38.5" (93g) 3B1M -
$44.99
Backordered
Recoil 95 #8 Iron, R Flex - 355" tip 38.0" (93g) 3B1M -
$44.99
In Stock
Recoil 95 #9 Iron, R Flex - 355" tip 37.5" (93g) 3B1M -
$44.99
In Stock
Recoil 95 Wedge, R Flex - 355" tip 37.0" (93g) 3B1M -
$44.99
Backordered
Recoil 95 #2 iron, S Flex - 355" tip 41.0" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #3 Iron, S Flex - 355" tip 40.5" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #4 Iron, S Flex - 355" tip 40.0" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #5 Iron, S Flex - 355" tip 39.5" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #6 Iron, S Flex - 355" tip 39.0" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #7 Iron, S Flex - 355" tip 38.5" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #8 Iron, S Flex - 355" tip 38.0" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #9 Iron, S Flex - 355" tip 37.5" (93g) 4B1M -
$44.99
In Stock
Recoil 95 Wedge, S Flex - 355" tip 37.0" (93g) 4B1M -
$44.99
In Stock
Recoil 95 #3 Iron, X Flex - 355" tip 40.5" (93g) 5B1M -
$44.99
Backordered
Recoil 95 #6 Iron, X Flex - 355" tip 39.0" (93g) 5B1M -
$44.99
In Stock
Recoil 95 #8 Iron, X Flex - 355" tip 38.0" (93g) 5B1M -
$44.99
In Stock
Recoil 95 #9 Iron, X Flex - 355" tip 37.5" (93g) 5B1M -
$44.99
In Stock
Recoil 95 Wedge, X Flex - 355" tip 37.0" (93g) 5B1M -
$44.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

UST Mamiya Recoil 95 Taper Iron Shafts

Finally, a revolutionary technology that will change how you think about iron shafts. UST Mamiya’s new recoil iron shafts are a game changer. In the past, heavy weight graphite iron shafts felt dead and stiff. With UST Mamiya’s exclusive recoil™ technology, we have brought feel back into the shaft, while allowing players to hit a wide range of shots that result in better distance control and pin seeking accuracy.

By positioning over 19 different layers within the shaft, we were able to create a design that outperforms the best steel shafts in the market.

  • Lightest weight option in a .355 taper tip.
  • Designed to produce efficient energy transfer for increased ball velocity and greater distance. 67% more efficient than steel.
  • Recoil™ 95 produces a medium ball flight.
  • Trimming Instructions

    UST Recoil Graphite Iron Shaft Specifications

    UST Mamiya Recoil Taper Iron Shafts is rated 4.4 out of 5 by 8.
    Rated 5 out of 5 by from Taylormade driving iron (UDI) shafts I bought the shafts to put in a collection (2-3-4) of Taylormade UDI's (driving irons). I liked the shafts overall but just felt they were a bit too stiff for my liking. I swapped the Recoil 95's shafts in stiff flex out for some Aerotech SteelFiber i95cw's shafts in stiff flex. It made all of the difference in the world, much more subtle feel & I felt that I wasn't required to swing hard & my best every time. I think if I had used the Recoil 95 shafts in regular flex, I would have been delighted & never would changed to the SteelFibers. All of my other clubs are stiff flex which leaves my thinking the Recoils are a bit firmer flex than others.
    Date published: 2016-07-17
    Rated 4 out of 5 by from recoil shafts experience i have bought the recoil 95 grams stiff shafts last month and just started to use them. the feeling is i bit different but much better as i use to play with the S 300 steel shafts from Dynamic gold. i think i have to get use to them before giving my final review. all what i can tell that it feels nice and and comfortable. i should check on the swing weight once again as i feel loosing distance... it might be an adjustment to be made at the club fitting center .
    Date published: 2016-02-22
    Rated 5 out of 5 by from UST 95 Recoil Taper Tip Graphite Shaft I really like the shaft, but for me it's a litle too heavy. It's perfect for someone whose played stteel shafted irons. I''m used to a lighter graphite shaft (70-75 grams.) I'm requesting the 800 Series Recoil Shaft, which UST will only sell through their Club Fitting Alliances.
    Date published: 2015-07-01
    Rated 1 out of 5 by from Horrible Iron Shaft This was an experiment with an extra AP2 714 6 iron. I like to try different shafts to see how they perform. There was no performance AT ALL from this Recoil shaft. Dead as wood, no feel and loss of distance. Horrible.
    Date published: 2016-11-05
    Rated 5 out of 5 by from Great shafts. I recently reshafted my irons with Recoil 95 F3 shafts. I'm so glad I did. Very pleased with this shaft. Accurate and outstanding feel. Excellent product.
    Date published: 2016-04-11
    Rated 5 out of 5 by from Review of recoil 95 .355 tip I bought 95 soft stepped 2x for a ping I25 6 iron and it works well. MY apex2 have f2 660 and I love these. DWR
    Date published: 2016-02-01
    Rated 5 out of 5 by from A great replacement for irons Replaced , my KBS extra stiff for Recoil 95 X stiff, very happy..
    Date published: 2015-10-22
    Rated 5 out of 5 by from Great feel Put the shafts on dBm forged heads best clubs I have ever hit
    Date published: 2016-07-06
    • y_2016, m_12, d_5, h_19
    • bvseo_bulk, prod_bvrr, vn_bulk_0.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_8
    • loc_en_US, sid_US0085, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_golfworks

    Hi Jim, I may need to finish a 5->PW set in the next week or so. The 6 iron regular flex shafts have been on backorder. Will using a 3 iron stiff flex shaft in the 6 iron be consistent in flex with the other reg flex shafts of the set? Thanks.

    Asked by: Caesar
    We are showing that they should be in the end of this week or first of next week. With taper tips you need the 6 iron R flex shaft. Using the 3 iron S flex might create a similar flex but since it just get installed and butt cut the graphics will likely not match up with the rest of the set and you may even end up covering part of the silk screen with the grip.
    Answered by: JimY
    Date published: 2016-12-05

    I want to reshaft my 5 iron and lengthen it a half an inch. Should I use the 5 iron shaft or a 4 since I'm lengthening? I have used a steel 5.5 project x successfully. With the additional length, stiff or regular? Thanks

    Asked by: Duby
    Use the 5 iron shaft for the 5 iron. The extra 1/2" will not cause a problem and in reality the flex of the shaft basically stays the same. The butt end of the shaft is the stiffest end so when you length a club like this you are lengthening it from the stiffest end and this stiffness will offset the increase of 3 swingweights you will get from the added 1/2" of length. The Project X 5.5 is closer to an S flex then an R flex.
    Answered by: JimY
    Date published: 2016-12-02

    Is 95 f3 stiffer than 760 ES f3? Have you tested this? Thanks. Also, if I cut it by 1 inch from bottom, how will it affect the stiffness? I appreciate your expertise and help.

    Asked by: Golfer55082
    I do not have any profile testing on the 760 ES F3 yet to be able to make that comparison to the 95 but I am very confident in saying that the 95 will test and play a little stiffer then the 760 ES based on the weight and playing characteristics of the shafts. I know the 760 ES is a newer version of the 660 and the 660 tests and plays more flexible then the 95.
    Answered by: JimY
    Date published: 2016-11-30

    Will the UST Mamiya Recoil 95 (.355 taper) fit in a set of Titleist 716 AP2s?

    Asked by: Ofletch
    Yes the Recoil 95 (.355" taper) will fit the Titleist 716 AP2's.
    Answered by: JimY
    Date published: 2016-11-03

    UST Mamiya Recoil taper shaft r flex will it work with a Titleist 990-B--DC1.? iron head.

    Asked by: luc
    Yes the taper tip Recoil shafts will fit the Titleist 990B DCI irons heads.
    Answered by: JimY
    Date published: 2016-10-31

    My friend would like to replace a broken apex shaft hogan edge pro 2 iron. Would these shafts fit?  I had a 660 shaft and it seems loose. Also when are u expecting the 2 and 4 iron shafts.

    Asked by: Sgtty
    Probably the first of November before we will have the 2 and 4 iron shafts in stock. It was common for shafts to fit loose in the Hogan irons. The Hogan company use to use red paper shims to shim their taper tip shafts to fit. They would assemble irons with the grips installed on the shafts before the shafts were installed into the clubhead. I am not sure but the bigger hosel bore might have given them an air release for installing the gripped shafts.
    Answered by: JimY
    Date published: 2016-10-10

    looking for graphite recoil for my ping i 25 lighter than steel

    Asked by: benny
    The Ping I25 irons use a .355" taper tip shaft so in the stock Recoil shafts that can be the 95 (US0085) and the 65 (US0100). These would be lighter weight then the stock steel shafts used by Ping. The Recoil 400, 600 and 700 Series shafts are only available in .370" parallel tips but can be special ordered in a .355" taper tip.
    Answered by: JimY
    Date published: 2016-09-19

    I want to reshaft my Razr X forged irons with UST Recoil 95 F4 shafts (.355 taper). Will I have to make them 1/2" longer to keep the same swing weight or can I keep them standard length and add lead tape to keep the same properties?

    Asked by: Shotmaker
    If your Razr X forged irons have steel shafts and you are reshafting with the Recoil 95 graphite shaft you will need to make the 1/2" longer to keep the swingweight in the same range that you had. You may or may not need to add lead tape depending on what swingweight you are trying to achieve.
    Answered by: JimY
    Date published: 2016-09-06
    • 2016-12-06T08:06CST
    • bvseo_cps, prod_bvqa, vn_cps_3.4.0
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_32
    • loc_en_US, sid_US0085, PRD, sort_recentAnswersFirst
    • clientName_golfworks