Value Shaft Extractor

Value Shaft Extractor


Value Shaft Extractor
$72.99
In Stock

Value Shaft Extractor

Removes most shafts easily and quickly. Shaft saver clamp fits most standard bench top vises (vise not included). Simply secure the shaft between the rubber Shaft Extractor pads with the hosel positioned in the appropriate holder. Attach the ratchet to the long bolt on the opposite side, apply heat and glide the head off the shaft tip. Straight push with no twisting saves graphite shafts for re-use.

Value Shaft Extractor is rated 4.45 out of 5 by 20.
Rated 3 out of 5 by from Limited Use Only I have owned the Value Shaft extractor for a little over a year. Excellent design for the hobbyist who likes to try different shaft/ driver or wood combinations. However, it is very difficult to use on steel or graphite shafted Irons that use a high strength epoxy. If you will have a need for iron shaft removal, look to one of Golfworks higher end extractors, it will be worth the money.
Date published: 2009-11-17
Rated 5 out of 5 by from Great Tool I work on and build clubs as a hobby and this is first shaft extractor I purchased. I just recieved it and first three woods I removed heads from shaft went effortlessly. I highly recommend this tool. Thanks Golfworks for suppling me with a great tool. Look for more purchases from me Golfworks
Date published: 2012-10-25
Rated 5 out of 5 by from Great Extractor I'm a novice club maker mostly for myself. Got this extractor because I wanted to be able to try out different shaft/club combinations. Have pulled two sets of irons (steel shafts) and about a dozen driver heads. This is a really well built tool that works exactly as I expected it to.
Date published: 2009-12-24
Rated 5 out of 5 by from Money saver Bought this because I wanted to change my shafts instead of buying new clubs. The closest shop that could do it was 2 hour drive and 20 dollars per club. This was very easy to use, I changed four of my clubs in less than two hours.
Date published: 2012-11-04
Rated 5 out of 5 by from Great Extracter After researching many extracters on bay and the net, I took the chance on this one. And I'm happy I did. First time using it was a breeze. Very easy to use. I would recommend to any one looking for a reasonably priced extracte.
Date published: 2011-07-31
Rated 3 out of 5 by from Simple, but not as effective as I hoped? I bought this specifically to get the heads off a set of late model forged irons that were perticularly stuborn to get off. I had to put some muscle on it even after what I considered to be a lot of steady heat! Before Ingot through the full set, the wrench began to strip a bit - I had to go to a quality wrench. From my initial experience, I'd suggest stepping up to a more sturdy model.
Date published: 2016-07-26
Rated 4 out of 5 by from Works as expected Very simple shaft extractor. Remove the ferrule, add a little masking or painters tape, clamp your shaft in, apply a little heat and slowly turn. If you don't get any movement keep the pressure on and add more heat. Take your time and apply heat all the way around the hosel evenly so as to not scorch any specific areas. Simple and quick.
Date published: 2015-06-05
Rated 4 out of 5 by from Does its job As of this review I used it once to repair a pitching wedge. It worked just fine using a heat gun on the graphite shaft. The only complaint I have is that I feel the item is still overpriced but compared to other pullers its a bargain. If you just change a few club heads once in awhile this will do the job very nicely.
Date published: 2016-08-17
  • 2016-08-31T08:25CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_en_US, sid_GW1112, PRD, sort_relevancy
  • clientName_golfworks

do I need a VISE to use this extractor?

Asked by: john
Yes you do need to use a bench vise with this extractor.
Answered by: JimY
Date published: 2016-03-14

Is this shaft extractor can fit in 4 to 5 inch bench top vise?

Asked by: John
Yes this extractor will work with either a 4" or 5" bench vise.
Answered by: JimY
Date published: 2016-03-14

Hi. How much will it cost to ship it to Sweden

Asked by: Value Shaft Extractor GW1
Shipping via USPS would be $35.50 and shipping via UPS would be $67.03.
Answered by: JimY
Date published: 2016-03-08

Do you sell replacement pads for this shaft extractor?

Asked by: Ed L
We do not sell replacement pads for this puller. I would suggest contacting our Customer Service department to see if they might be able to help you out in any way. You can contact them at 1-800-848-8358 or at golfworks@golfworks.com.
Answered by: JimY
Date published: 2016-01-11

Shiping cost to Cancun Mexico Please.    Value shaft extractor.

Asked by: Jackb
Approximately $48.00 shipping via UPS.
Answered by: JimY
Date published: 2015-12-29

How does the "Value Shaft Extractor" differ from the "Clubmakers Vise Graphite Shaft Extractor" ?

Asked by: abprice
The Clubmaker's Vise Extractor is designed to mount into the Clubmaker's Vise that we sell. The Value Shaft Extractor will work and mount into any vise. Other then that they work the same.
Answered by: JimY
Date published: 2015-05-05

Can this be used to remove a Titleist adapter from a graphite shaft? 

Asked by: CK24
Yes, you can remove any shaft from any head or adaptor. You will need to either save the ferrule or replace it after the shaft has been removed. I also suggest that you use The GolfWorks OEM Adaptor Saver Kit in conjunction with the shaft adaptor: http://www.golfworks.com/product.asp?pn=GW0130
Answered by: Admin
Date published: 2015-04-22

Is the metal section that holds the pressure bolt and shaft clamp aluminum or steel?  Thank you

Asked by: Golfho
They are aluminum.
Answered by: JimY
Date published: 2015-04-14
  • 2016-08-31T08:27CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_US, sid_GW1112, PRD, sort_recentAnswersFirst
  • clientName_golfworks