Aerotech Claymore Graphite Wood Shafts

Aerotech Claymore Graphite Wood Shafts

48 F2-A Flex - 335 tip (48g) 2D2S
In Stock
48 F3-R Flex - 335 tip (48g) 3B2M
In Stock
60 F3-R Flex - 335 tip (57g) 3B2M
In Stock
60 F4-S Flex - 335 tip (59g) 4B2M
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

Aerotech Claymore Graphite Wood Shafts

The Aerotech Claymore graphite wood shaft features a high modulus, ultra light weight design ideal for today's modern golf club heads.

  • .355" tip diameter
  • Micro-Tex Carbon Fiber in the hoop-wound surface layer minimizes shaft distortion for extreme stability
  • Filament wound for bending uniformity

Trimming Instructions

Aerotech Claymore Graphite Wood Shaft Specifications

Aerotech Claymore Graphite Wood Shafts is rated 4.8 out of 5 by 4.
Rated 5 out of 5 by from Fantastic shaft Just tried my new CIaymore 48g r shaft and I could not be happier.I was looking for an inexpensive lightweight driver shaft, when I saw that Aerotech made the Claymore shaft I decided to try it. I had Golfworks assemble and pure it. Total cost including shipping was $158. I put it in a Taylor M2 9.5 and was surprised that ball flight was high considering it had a mid flex point and 4.9 torque. I replaced a Kurokage 60 r and Graphite Design 50 series r. The shaft felt solid through impact yet had a little kick and had better distance than my other shafts. Received in less than 1 week. Highly recommend.
Date published: 2017-08-18
Rated 4 out of 5 by from Lightweight low launch shaft I was surprised by the tip stiffness in the F3 (regular) flex. I like the light weight, but had to increase the loft on my Titleist 913 D2 to handle the lower launch. It is not as smooth as my Fujikura Blur Red 005, but is a nice performer at an excellent price.
Date published: 2015-06-10
Rated 5 out of 5 by from Stable and solid easy to control I put the Claymore 48 in flex 4 (stiff) in my Wilson FG tour driver, to replace the 50gram Aldila rogue it came with. Instantly gave me control over the ball flight and spin again. For a 50 gram this is a strong shaft, I would like to try the flex 3 to see if it gives a bit of extra kick.
Date published: 2017-05-02
Rated 5 out of 5 by from shaft better then the one that came with adam blue driver
Date published: 2016-09-19
  • y_2018, m_1, d_18, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_AT0013W, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Shaft for Taylormade Tour Burner; medium flex.Suggest.

Asked by: ranjan
The Tour Burner uses a .350" tip size shaft so a shaft like the Aldila NVS (AL0001W) could work well and make a good replacement. The NVS is currently on backorder until the middle of December. The Grafalloy ProLaunch Blue 65 (TT0107) is another good choice. You will have to use the Taylor Made BB9008 adapter for installing this .335" tip size shaft into the .350" hosel bore of the Tour Burner.
Answered by: JimY
Date published: 2017-11-21

Can you install a callaway epic driver tip

Asked by: Oscar
Yes we can install the shaft tip adaptor for the Callaway Epic. You will need to order the adaptor separately. The code is CA0020.
Answered by: JimY
Date published: 2017-10-10

I would like to purchase 3 wood shafts ALT 470 flex AT0021 What is the total price canadian

Asked by: Rabbie
Here is the link from our GolfWorks Canada web site. It shows the Canadian prices. If you have more questions on the Canadian pricing or shipping questions it would be best to contact GolfWorks Canada directly at 1-800-387-5331.
Answered by: JimY
Date published: 2017-08-24

Aerotech website has F classifications for the MX 48....which F classification is the regular MX 48 that you sell

Asked by: chris
In the Claymore MX48 shaft we stock the F2, which is the A (Senior) flex and the F3 which is the Regular flex.
Answered by: JimY
Date published: 2017-08-15

I have a Call away EPIC driver with a poor quality graphite shaft (too flexible) even though I am 88.The club pro agrees and is trying to sell me a new PING driver What should ? I do I value your expert opinion. Kindest regards Peter Hansman

Asked by: MOPSY
I have not hit the Callaway Epic driver yet but have hit the new Ping G400 and thought it was very good. It would help to know which shaft is in the Epic driver to make some comparisons. If you have a 40 gram weight version and want to stay in that weight range the Grafalloy ProLaunch Blue 45 (TT0106) could be a good choice. If the shaft is in the 50 gram range the Mitsubishi Kuro Kage Black HBP 2nd Gen 50 (MR0044) could be a good choice. Both of these could play a little stiffer then the stock shaft in the Epic.
Answered by: JimY
Date published: 2017-07-31

Wanting to put Aerotech wedge shaft in Cleveland rtx 3 head. Can you tell me if the hosel is tapered or straight. Thanks

Asked by: Dog
The Cleveland RTX 3 wedges use a .355" taper tip shaft size.
Answered by: JimY
Date published: 2017-07-20

hi sir i want a claymore wood shaft mx-48, f4. Do not you have it? When will you be able to buy?

Asked by: harang
We do not stock the MX-48 Claymore shaft in the F4 flex. We would have to special order the shaft for you. You would need to contact our International Trade Accounts Manager, Donna Ours, at and she can help you with the special order.
Answered by: JimY
Date published: 2017-07-03

How do we determine the flex on a Claymore shaft. i.e., What is F4?

Asked by: Mike
F4 is an S (stiff) flex. F2 = A flex F3 = R flex F4 = S flex
Answered by: JimY
Date published: 2017-06-19
  • y_2018, m_1, d_18, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_AT0013W, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks