Aerotech SteelFiber 110 Graphite Iron Shaft (Sets) - .355"

Aerotech SteelFiber 110 Graphite Iron Shaft (Sets) - .355"


110 S Flex - 36.5"-40" (Set of 8), .355" tip (110gm) 4B1H
$391.99
In Stock
110 X Flex - 36.5"-40" (Set of 8), .355" tip (110gm) 5B1H
$391.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Aerotech SteelFiber 110 Graphite Iron Shaft (Sets) - .355"

Aerotech SteelFiber 110 Graphite Iron Shafts.

Features:
  • Steel fibers integrated into graphite composite produces a shaft more consistent in flex, geometry and straightness than steel iron shafts
  • Low torque for better control
  • Tour weight and feel provides trajectory control desired by stronger players.
  • Available in .355 tip tapered (sets only) and .370 tip diameters

Trimming Instructions

Aerotech SteelFiber 110 Shaft Specifications

Not Found.

I need a replacement shaft for my ping sand wedge. It's a 110 steelfiber taper tip in stiff flex. But Golfworks only sells them in sets. What can I do?

Asked by: Robert
We sell the Steel Fiber iron shafts individually. You will find them at this link. https://www.golfworks.com/aerotech-steelfiber-110-iron-shafts-355/p/AT0017IE/
Answered by: JimY
Date published: 2017-08-24

Do these come in a regular flex?

Asked by: Bill
Yes the Steel Fiber 110 shafts are manufactured in an R flex but we do not stock them. We can special order them for you. You would need to call Customer Service at 1-800-848-8358 and they can help you with your special order.
Answered by: JimY
Date published: 2017-08-07

What distributor stocks the i95cw 4 - pw bundles?

Asked by: buddy
If you are purchasing less than the 8 pieces, you would need to purchase the individual shafts under code AT0015IE at 48.99 ea. For the 4-PW, which is 7 pieces, the price would be $342.93. You would order the 36.5" thru the 39.5" shafts.
Answered by: GW2002
Date published: 2017-03-27

Will these work in the 1992 hogan apex blades?

Asked by: Marion
Yes the AT0017I or AT0017IE shafts will fit the 1992 Hogan Apex blades.
Answered by: JimY
Date published: 2017-01-04

do you have in stock Aerotech i110 CW shafts for an iron set of 3 to PW. 8 Shafts. How much canadian

Asked by: Steve
Here is the link from our GolfWorks Canada site with the set of shafts, 3-PW, and the pricing. http://www.golfworks.ca/aerotech-steelfiber-110-graphite-iron-shafts-355/p/AT0017I/
Answered by: JimY
Date published: 2016-06-21

When installing, do the labels go up or down? Do they have to be spined

Asked by: RG104
You can install the shafts either label up or down, which ever is your preference. If you have the shafts Pured or spine aligned you would then install the shafts by the alignment marks identified by these processes and the labels could end up in different position with each shaft. Here is a link where you can read about Puring and see a video on how it is done. http://sstpure.com/
Answered by: JimY
Date published: 2016-02-02

Where are Aerotech Steelfiber irons shafts manufactured?

Asked by: Billy53
They are manufactured in China.
Answered by: JimY
Date published: 2015-10-25

Good morning, I would like to buy a set of Aerotech shafts, i110 .355 taper tip, flex S for my 4-PW, GW, SW, LW. Lengths: 38.5 #4, 38 #5, 37.5 #6, 37 #7, 36.5 #8, 36 #9, 35.5 #PW, 35.5 #GW, 35.5 #SW and 35,5 #LW. Del to Chicago. Pls advise avail/price.

Asked by: Mart
The Aerotech Steel Fiber .355" taper tip iron shafts are sold in sets of 3 - PW only. To get a set in 4-PW you would have to place a special order through our Customer Service department. You can contact them at 1-800-848-8358 and they would be able to give you the pricing. We do stock individual wedge shafts (AT0017IW) and their cost is $48.99 each. We do have sets of 110 S flex 3-PW in stock as well as the individual wedge shafts.
Answered by: JimY
Date published: 2015-07-15
  • y_2017, m_10, d_18, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_AT0017I, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks