Aerotech SteelFiber 95 Graphite Iron Shaft (Sets) - .355"

Aerotech SteelFiber 95 Graphite Iron Shaft (Sets) - .355"

95 R Flex - 36.5"-40" (Set of 8), .355" tip (95gm) 3B1H
In Stock
95 S Flex - 36.5"-40" (Set of 8), .355" tip (95gm) 4B1H
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

Aerotech SteelFiber 95 Graphite Iron Shaft (Sets) - .355"

Aerotech SteelFiber 95 Graphite Iron Shafts.

  • Steel fibers integrated into graphite composite produces a shaft more consistent in flex, geometry and straightness than steel iron shafts
  • Low torque for better control
  • Designed for players looking to gain distance without sacrificing control.
  • Tapered .355" tip diameter
  • Sold in sets only (R & S flex)

Trimming Instructions

Aerotech SteelFiber 95 Shaft Specifications

Aerotech SteelFiber 95 Graphite Iron Shafts - .355" is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Aerotech shafts I bought the 95 gm in a regular flex installed in a set of Ping 855s. I was a little surprised that my irons do not feel any lighter with these shafts; however, I am very pleased with the results. Shafts have added 10 yards to my irons, possibly as a result of switching from stiff to regular flex. 3 and 4 irons are much more playable. Not a cheap conversion, but worth it for me.
Date published: 2015-08-14
  • y_2017, m_3, d_21, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_AT0015I, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Can I order these 4-PW only s flex 95 g taper tip

Asked by: Harry
At this link you can order them individually.
Answered by: JimY
Date published: 2016-11-28

Is there a way to "soft-step" these shafts in the .355 version either stiff or regular for irons.

Asked by: mbj
These are sold in sets of 3 - PW only and they do not offer a 2 iron shaft. So if your set make up is other then 3-PW you could soft step by putting the 3 iron shaft into a 4 iron. Again depending on the set make up you could take the R flex and hard step by putting the 4 iron shaft into the 3 iron and they do offer individual wedges shafts (AT0019W) to use in the wedges. A lot of this depends on your set make up.
Answered by: JimY
Date published: 2016-04-11

lie adjustment?

Asked by: noorm
I do not understand your question regarding this shaft?
Answered by: JimY
Date published: 2016-03-31

Want to buy Areotech I95 reg 355 taper, 4 thru PW

Asked by: antone
The AT0015i can only be purchased from our stock in an eight shaft set, 3-PW 36.5" thru 40". We can special order them in 4-PW. You will need to call our customer service department so they can help you place the special order. 800-848-8358.
Answered by: GW2002
Date published: 2016-02-04

I want to try these graphite shafts...I don't know which ones to order???

Asked by: Kszura
Individual wedge length shafts are offered (AT0015IW). Other Individual taper tip shafts are available by special order. Please contact our customer service dept. at 1-800-848-8358 for more information.
Answered by: Kevin F
Date published: 2015-04-06

If I need to order an individual SteelFiber i95 shaft due to breakage, how long does it take for the special order to arrive from company?

Asked by: iremjim
Typically it takes 7-10 days for a special order from SteelFiber.
Answered by: Admin
Date published: 2015-03-16

Aerotech SteelFiber 95 Iron .355 - are these the "cw" constant weight shafts (4B1H)?

Asked by: TomFL
The SteelFiber 95 .355 shafts we carry in the catalog and on the website are the constant weight 95 gram taper tip.
Answered by: GW2002
Date published: 2015-03-06

Will these shafts produce a similar swing weight to a steel shaft when cut to the same playing length?

Asked by: crazewedge
The swingweight would only be similar to a 95 gram steel shaft, since this shaft is also 95 grams. This assumes a similar balance point. Heavier steel shafts would most likely produce heavier swingweights. Rule of thumb, 9 grams of shaft wieght equals 1 swingweight point.
Answered by: GW2002
Date published: 2015-02-16
  • y_2017, m_3, d_21, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_AT0015I, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks