Aerotech SteelFiber Graphite Iron Shafts - .370"

Aerotech SteelFiber Graphite Iron Shafts - .370"


70 A Flex - .370 tip (74g) 2B2M
$46.99
In Stock
70 R Flex - .370 tip (74g) 3B2H
$46.99
In Stock
70 S Flex - .370 tip (74g) 4B2H
$46.99
In Stock
80 R Flex - 370 tip (85g) 3B2H
$46.99
In Stock
80 S Flex - 370 tip (85g) 4B2H
$46.99
In Stock
95 R Flex - 370 tip (95g) 3B1H
$46.99
In Stock
95 S Flex - 370 tip (95g) 4B1H
$46.99
In Stock
110 S Flex - .370" tip (110gm) 4B1H
$46.99
In Stock
110 X Flex - .370" tip (110gm) 4B1H
$46.99
In Stock
Bore Thru Tip/Butt Trim
$15.75
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Aerotech SteelFiber Graphite Iron Shafts - .370"

The Aerotech Steelfiber graphite iron shaft is available in .370" tip diameter in four weight profiles.

SteelFiber 70 Iron Shafts
  • For slower swing speed players needing more distance
SteelFiber 80 Iron Shafts
  • Designed for the player looking to gain distance without sacrificing control
SteelFiber 95 Iron Shafts
  • Designed to give the strongest players a true alternative to steel
SteelFiber 110 Iron Shafts
  • Provides the trajectory control desired by stronger players

Trimming Instructions

Aerotech SteelFiber Graphite Iron Shafts - .370" is rated 4.9 out of 5 by 15.
Rated 5 out of 5 by from steel fiber i 80 I ASSEMBLED A SET OF IRONS FOR A CUSTOMER USING THE i 95 STIFF. MY CUSTOMERS SAYS THEY ARE THE BEST SHAFTS HE HAS EVER HAD IN A SET OF IRONS. I ASSEMBLED A SET OF IRONS FOR MYSELF USING THE i 80 R FLEX. I AGREE WITH MY CUSTOMER THE BEST SHAFTS I HAVE EVER HAD IN A SET OF IRONS. I RECOMMEND THESE SHAFTS TO MY FRIENDS AND ANYONE WANTING A GREAT QUALITY SHAFT AT A REASONABLE PRICE.
Date published: 2012-04-17
Rated 5 out of 5 by from Great shaft with interesting features I liked the taper tip version in other clubs so I bought this shaft to try in a set of single length irons to reduce total weight, increase club speed, add a bit of kick and increase swingweight. Balance point is relatively closer to tip in these shafts so swingweight ended up a bit too high with my normal 50gm grip. After "counterbalancing" with a 64gm grip, all of my objectives were achieved . Club feels just the way I wanted,distance is significantly increased. Dispersion excellent. Superb shaft, will do the whole set.
Date published: 2015-08-27
Rated 5 out of 5 by from I80 & I95 Aerotech shafts 12HC* I bought these after I had hit them in my father in-laws clubs. Im never been a guy who believes equipment adds or detracts that much from aersons game, but rather talent, swing plane and fundamentals make up the majority of one game. These shafts have slightly made me re-think about that. Since added these shafts to my XR irons (played at 2 degrees flat) I kid you not I am a club to a club and a half longer and much more accurate!! Its almost unbelievable... Pricey but my god what diffrence they have made!!
Date published: 2016-03-18
Rated 5 out of 5 by from Great control and distance I have used these shafts with the MXU utility heads, and they give excellent accuracy and distance. I have also used the Steelfiber shafts in some irons, and my customers really like the control and distance, along with outsanding feel. Overall, it is a fine shaft.
Date published: 2007-12-12
Rated 5 out of 5 by from Great move I've been playing the Aerotech 80 shaft for a month (previous shaft was the Rifle 5.0). Tested them on Pine Valley and Merion two weeks ago. Great feel; very stable. Works for all shots. Highly recommended.
Date published: 2015-06-01
Rated 5 out of 5 by from i95's We installed the stiff i95's in the VEGA VM-02 raw iron heads(D4)and put the i110's in the wedges. We also built a set for my father(8 handicap) with regular i95's and the VEGA VC-03 heads(D4). The shaft/head combo has an incredible look and feel. Shaft is very stable despite the intitial overall light feel and the traj is perfect. I would recommended these shafts to players of all levels and swing speeds.
Date published: 2013-12-29
Rated 5 out of 5 by from i95's We installed the stiff i95's in the VEGA VM-02 raw iron heads(D4)and put the i110's in the wedges. We also built a set for my father(8 handicap) with regular i95's and the VEGA VC-03 heads(D4). The shaft/head combo has an incredible look and feel. Shaft is very stable despite the intitial overall light feel and the traj is perfect. I would recommended these shafts to players of all levels and swing speeds.
Date published: 2013-12-29
Rated 5 out of 5 by from steel fiber i 80 I ASSEMBLED A SET OF IRONS FOR A CUSTOMER USING THE i 95 STIFF. MY CUSTOMERS SAYS THEY ARE THE BEST SHAFTS HE HAS EVER HAD IN A SET OF IRONS. I ASSEMBLED A SET OF IRONS FOR MYSELF USING THE i 80 R FLEX. I AGREE WITH MY CUSTOMER THE BEST SHAFTS I HAVE EVER HAD IN A SET OF IRONS. I RECOMMEND THESE SHAFTS TO MY FRIENDS AND ANYONE WANTING A GREAT QUALITY SHAFT AT A REASONABLE PRICE.
Date published: 2012-04-17
  • y_2017, m_6, d_25, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_AT0004I, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

74 yr. old male.  Just fit with i70 shafts in Big Bertha OS irons. Tips trimmed a little more than std. Feel heavier than previous Ping K15 seniors. Lost a couple mph swing speed. Gained no distance or elevation. Was it a mistake to trim tips this way? 

Asked by: Mick
From the information I have the stock graphite shafts in the Ping K15 irons would have been similar in weight to the Steelfiber i70. I would expect the Steelfiber to play a little stiffer then the Ping shaft even if you had not tip trimmed a little more.
Answered by: JimY
Date published: 2017-06-07

I play Mizuno mp54's with true temper s300 shafts. Looking for the vibration dampening benefit of graphite. Which corresponding aero tech shaft would you recommend and what differences would I notice between ththe two shafts. Thanks 

Asked by: Poimenos
Based on shaft weight alone the Steelfiber 110CW at 110 grams would be the closest weight we stock to the Dynamic Gold S300 at 130 grams. Ball flight should be fairly similar with the Steelfiber shafts. Aerotech does make a 125CW (125 grams) shaft that we do not stock but can special order. It would be closesr in weight to the DG S300 and have similar ball flight characteristics. I have read that Matt Kuchar and Brandt Snedeker play the 95CW and Fred Couples plays the 110CW shafts. The feel of graphite is the biggest thing you will notice. It could be a good idea to get one or two shafts to try before ordering the whole set. You can purchase these shafts individually.
Answered by: JimY
Date published: 2017-06-05

Can you re shaft Ping I e steel shafted irons with steel fiber?

Asked by: Bob P
Yes you can reshaft your Ping iE irons with the Steel Fiber graphite shafts. You will need the .355" taper tip version of the shaft for the Ping irons (AT0019IE) https://www.golfworks.com/aerotech-steelfiber-80cw-graphite-iron-shafts-355/p/AT0019IE/
Answered by: JimY
Date published: 2017-05-26

I play the Aerotech i95 shaft, Callaway Diablo forged irons, but my swing speed has slowed to around 88mph,(Driver), 7 iron down to 140. I'm thinking about changing to the i80 shaft, or should I go with the i70? Hear the flex profile is different?

Asked by: MikeMc
If you have a smooth tempo based on your driver swingspeed and hitting a 7 iron from 140 yards the i70 could be a good choice. The flex profiles are different in the middle part of the shaft. The i80 is stiffer. It is pretty normal that the heavier shaft will play a little stiffer then the lighter version. If you have a faster tempo then the i80 would probably be the better choice.
Answered by: JimY
Date published: 2017-05-26

do you have tipping instructions for the aerotech iron shaffts

Asked by: cotton47
They follow trim code IR21 which you will find on the second page at this link. https://www.golfworks.com/images/art/shaft_trim_inst.pdf
Answered by: JimY
Date published: 2017-05-15

Hi, I have aerotech 95s in.355,I bought a new set of clubs with .370 hosel.Can I put the .355 shafts in the new .370 ,or do I have to buy new shafts,

Asked by: Kevin
You can put .355 tip shafts into .370 hosels but you will need to use a shim to make up the difference. Our SHIMT is designed putting .355 tip shafts into .370 hosel diameters.
Answered by: GW2002
Date published: 2017-04-06

I am looking at installing I80R's in irons and would like a professional opinion of what Steel Fiber shaft you would recommend for my wedges (S+L).. Driver SS 95mph, I assume I would go up a weight (95 or 110) and which flex? thanks in advance.

Asked by: Tappy
At a 95mph driver swing speed you would fit into an S flex iron shaft. You will need (2) 36.5" shafts for your sand and lob wedge. The weight is just a personal preference. If you prefer heavier wedges there would be no issue with installing the 95 or 110 shafts into your wedges.
Answered by: Admin
Date published: 2017-04-01

Will these shafts fit 2017 M2 irons? Also, I am thinking of getting the i95 in R flex  instead of the stock FST reax 88. R flex because people told me these shafts come stiffer than normal in flex. My driver swing speed is 95-105 and 7 iron is 75-77

Asked by: Marcus
The 2017 M2 irons use a .370" tip size shaft so yes these will fit. To me the Steel Fiber R flex shafts play pretty true to flex. It sounds like the R flex could work well for you.
Answered by: JimY
Date published: 2017-03-13
  • y_2017, m_6, d_25, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_77
  • loc_en_US, sid_AT0004I, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks