Aldila Low Torque Graphite Iron Shaft

Aldila Low Torque Graphite Iron Shaft

L Flex - 370 tip (77g) 1D3S
In Stock
R Flex - 370 tip (82g) 3D3S
S Flex - 370 tip (84g) 4D3S
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

Aldila Low Torque Graphite Iron Shaft

The Aldila Low Torque graphite iron shaft is a clubmaker's choice for consistency and value.

  • .370" tip diameter
  • Great choice for beginning to average players

Trimming Instructions

Aldila Low Torque Graphite Iron Shaft is rated 4.5 out of 5 by 2.
Rated 5 out of 5 by from Great shaft I've have a set of drivers with Aldila shafts. But, this is the first time I installed Aldila graphite shafts on iron clubheads. Is it possible a new set of STi Maltby irons with low torgue Aldila graphite shafts could increase my confidence on the course? - don't ask. I love the feel. Best ever!!!
Date published: 2016-10-02
Rated 4 out of 5 by from Great price good shaft. The k I bought these to put in my 2 Cleveland Wedges. I prefer graphite over steel and I really like the feel of these. They're much better than the stock steel shaft. Hard to beat for the money.
Date published: 2015-12-28
  • y_2017, m_6, d_25, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_1204I, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I have a 2010 set of Cleveland CG7 3-9 irons. Because of injured shoulders, I am thinking of replacing the standard regular flex steel shafts with graphite. Suggestions

Asked by: Vincer
The Aldila Low Torque or Aldila Value Series (VXBI) could both work. If you need a lighter weight option the AldaLite (AL0056) could be a very good choice.
Answered by: JimY
Date published: 2017-05-24

have 2005 set of Ping 5 irons with TFC100i graphite shafts. One just snapped off at head. Another is cracked near head. These custom fit clubs have my name on them. I need to replace shafts. What to you suggest?

Asked by: flocker
Hey Jim. you should contact Ping. I've got 5 sets of Pings over the years. The head of my irons broke off 2 or 3 times. The pro at the club I was a member of sent them to Ping and they replace them each time at NO CHARGE. Plus they cleaned them up for me and painted the numbers. Ping is great at customer service.
Answered by: The Duck
Date published: 2017-05-04

I recently bought a set of Titleist 822os irons very cheap,but they had ladies shafts. What mens grafite stiff shafts can I replace them with.

Asked by: Bill G
The Titleist 822 OS irons use a .355" taper tip shaft so your graphite shaft choices are limited to the following shafts. Aerotech Steel Fiber 70CW (AT0020IE), 80CW (AT0019IE), 95CW (AT0015IE), 110CW (AT0017IE), UST Recoil 65 (US0100) Recoil 95 (US0085), Recoil 110 (US0087), Recoil 125 (US0088) and the Paderson Kinetixx IMRT Kevlar 950 (PK0004) and Paderson Kinetixx TS-I (PK0105)
Answered by: JimY
Date published: 2017-06-14

looking for a sw shaft lady graphite .370 tip

Asked by: mstapleton
The Aldila Low Torque 1204I in the L flex would work. Another option could be the Maltby LTech (MA0209) iron shaft in the L flex.
Answered by: GW2002
Date published: 2017-03-21

What shaft would match the ping 401 in the karsten iron sets I need two shaft as close as I can get ping want $62 each 

Asked by: Marow
The Ping irons use a .355" taper tip shaft. I would suggest the Xcaliber (AS0028) as a good inexpensive replacement for the 401 and it will fit the Ping Irons.
Answered by: JimY
Date published: 2017-03-09

can a Aldila Low Torque Graphite Iron Shaft-be installed on a Taylor made Burner Rescue 4-??? if not what is recommended-want to change the flex from regular to stiff-Thanks

Asked by: Joe44
You would use the Aldila Low Torque iron shaft in the Burner Rescue 4. You would tip trim the shaft following the tipping instructions for the 4 irons. Another option would be to use the Aldila Value Series Hybrid shaft (AL0029). The Burner Rescue is a hybrid.
Answered by: JimY
Date published: 2017-03-03

I am considering building a set 5-PW with this shaft. Is the uncut shaft fairly consistent in weight and CPM ? I want to build a good consistent set of clubs.

Asked by: Layton
For a shaft that sells for $12.99 the weight specifications have always been pretty good. The cpm's are likely going to vary a little more with a shaft like this but generally they will stay within a pretty decent range. Frequency matching graphite can always be a challenge.
Answered by: JimY
Date published: 2017-02-28

Are the L and R flex the same color and design in this shaft?

Asked by: Nick
Yes the Low Torque shafts are all the same color for the different flexes.
Answered by: JimY
Date published: 2017-01-04
  • y_2017, m_6, d_25, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_en_US, sid_1204I, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks