Aldila NV Graphite Hybrid Shaft

Aldila NV Graphite Hybrid Shaft

85R Flex - 370 tip (84g) 3B2H
In Stock
85S Flex - 370 tip (84g) 4B2H
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

Aldila NV Graphite Hybrid Shaft

The Aldila NV graphite hybrid shaft utilizes the same high performance NV technology as the wood shaft only in a hybrid profile.

  • .370" tip diameter
  • Designed with Micro Laminate Technology™ - constant taper wall thickness that increases consistency of flex and bend points

Trimming Instructions

Aldila NV Hybrid Shaft Specifications

Aldila NV Graphite Hybrid Shaft is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Excellent I reshafted a hybrid using this shaft to match one I had recently purchased on eBay. I've been very pleased with it so far.
Date published: 2016-05-31
Rated 5 out of 5 by from Aldila NV Graphite Hybrid Shaft Was exactly what I wanted...the tip was prepared perfectly and it was an easy assembly. Very responsive shaft.
Date published: 2015-10-12
  • y_2017, m_3, d_26, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_AL205201, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

if putting new hybrid shafts into Callaway 3 and 4 Hybrids - what needs to be done in the ordering process relative to tip and butt trimming ?

Asked by: David F
The Aldila NV Hybrid (AL205201) trimming instructions call for no tip trim, no matter what hybrid you put them in. After installation, you would tip trim to final length from the butt.
Answered by: GW2002
Date published: 2017-03-15

Do you know if the NV 85s will fit in a titleist 909H hybrid? 

Asked by: Dan
No the NV 85 hybrid shaft will not fit the Titleist 909H Hybrid. The 909H Hybrid used a .355" taper tip hybrid shaft. The NV 85 Hybrid shaft is not available in a.355" taper tip. We do not stock any .355" taper tip hybrid shafts.
Answered by: JimY
Date published: 2017-01-06

I have an 11 degree and a 9 degree callaway X2 HOT fairway wood.  I have a slow swing and have senior shafts on my driver, 3 wood, hybrids and irons.  I'm 73 years old and shoot anywhere from 88 to 95.  What shafts would you recommend? About $50 each.

Asked by: Chuck
Did you mean to say that you have the Callaway X2 Hot 9 and 11 woods? An Aldila shaft like the NVS 55 (AL202202) could work well. The Grafalloy ProLaunch Blue 45 (TT0106) could be another good choice. The A flex is the Senior flex with both of these shafts. Both of these shafts will fit the Callaway X2 Hot fairway woods.
Answered by: JimY
Date published: 2016-11-14

Is this shaft same as a senior fairway wood shaft.

Asked by: Chuck
No this is a shaft for hybrids. It has a .370" tip diameter which is to big to fit fairway woods and the length is 42" long which is to short to fit fairway woods. You would use the NV Wood (1205W) shaft for both drivers and fairway woods.
Answered by: JimY
Date published: 2016-11-11

I have a cobra 20* baffled that has an aldila NV-HL 65 shaft in stiff. I want to change that out to regular shaft. Can u direct me to the nearest comparable shaft? Thanks

Asked by: Nicnack
AT 20 degrees I am assuming this is an older Cobra Baffler Hybrid? If that is the case it uses a .335" tip diameter hybrid shaft, which is not a common size hybrid shaft these days. The only .335" tip diameter hybrid shaft we stock is the UST ProForce V2 Hybrid (US0013H) and it should be fairly comparable to the NV-HL shaft the Aldila made for Cobra.
Answered by: JimY
Date published: 2016-08-29

Looking for a replacement shaft for a Cobra S9 7 iron. The broken graphite shaft is an Aldila NV HL70 (regular flex - mid kick - 70g - 3.5*). What current Aldila shaft would be a good replacement.

Asked by: Hoppy
The Cobra S9 irons require a .355" tip diameter. The original shafts in those irons were probably a "made for Cobra" series and not available to the aftermarket. I don't know of any Aldila shafts currently available that would be a good match. The SteelFiber 70 is about as close as you will get in a graphite shaft option.
Answered by: Admin
Date published: 2016-07-29

Does this shaft fit Cleveland 588 Gliderail hybrids? If no, which R flex shafts that you sell do?

Asked by: bdskinner
The 588 Gliderail hybrid has a .370 hosel bore, so the Aldila NV 85 Hybrid .370 will work.
Answered by: GW2002
Date published: 2016-07-20

I need the NV 85 hybrid shaft in a .355 tip in a stiff shaft

Asked by: GreenTed
We do not stock the NV 85 Hybrid shaft in a .355" taper tip. Aldila does show it on their web site so we should be able to special order one for you. You will need to contact Customer Service at 1-800-848-8358 or by email at
Answered by: JimY
Date published: 2016-06-24
  • y_2017, m_3, d_28, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_AL205201, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks