Aldila NV Graphite Hybrid Shaft

Aldila NV Graphite Hybrid Shaft


85R Flex - 370 tip (84g) 3B2H
$31.99
In Stock
85S Flex - 370 tip (84g) 4B2H
$31.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Aldila NV Graphite Hybrid Shaft

The Aldila NV graphite hybrid shaft utilizes the same high performance NV technology as the wood shaft only in a hybrid profile.

Features:
  • .370" tip diameter
  • Designed with Micro Laminate Technology™ - constant taper wall thickness that increases consistency of flex and bend points

Trimming Instructions

Aldila NV Hybrid Shaft Specifications

Aldila NV Graphite Hybrid Shaft is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Excellent I reshafted a hybrid using this shaft to match one I had recently purchased on eBay. I've been very pleased with it so far.
Date published: 2016-05-31
Rated 5 out of 5 by from Aldila NV Graphite Hybrid Shaft Was exactly what I wanted...the tip was prepared perfectly and it was an easy assembly. Very responsive shaft.
Date published: 2015-10-12
  • y_2017, m_11, d_22, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_AL205201, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What tip diameter does a Maltby Logitech hybrid take?

Asked by: Bobby
The Logic Tech Tungsten Hybrids we made use a .335" tip size shaft.
Answered by: JimY
Date published: 2017-11-20

What I kid the difference between nvs & nv shafts

Asked by: Petera
The NV is designed for a lower ball flight and the NVS is designed for a mid ball flight. The NV in the same flex will play a little stiffer then the NVS.
Answered by: JimY
Date published: 2017-07-18

what is the best senior shaft to put on the new c3i wedge. the shaft on that club is very heavy. I want a lighter graphite shaft and will it require tips and such?

Asked by: cactus
A shaft like the Aldila Value Series shaft cut to an A flex (Senior Flex) could work with the C3i wedge. Also a shaft like the Kuro Kage (MR0046) A flex could also work well. https://www.golfworks.com/mitsubishi-rayon-kuro-kage-black-2nd-gen-iron-shafts/p/MR0046/
Answered by: JimY
Date published: 2017-05-08

if putting new hybrid shafts into Callaway 3 and 4 Hybrids - what needs to be done in the ordering process relative to tip and butt trimming ?

Asked by: David F
The Aldila NV Hybrid (AL205201) trimming instructions call for no tip trim, no matter what hybrid you put them in. After installation, you would tip trim to final length from the butt.
Answered by: GW2002
Date published: 2017-03-15

Do you know if the NV 85s will fit in a titleist 909H hybrid? 

Asked by: Dan
No the NV 85 hybrid shaft will not fit the Titleist 909H Hybrid. The 909H Hybrid used a .355" taper tip hybrid shaft. The NV 85 Hybrid shaft is not available in a.355" taper tip. We do not stock any .355" taper tip hybrid shafts.
Answered by: JimY
Date published: 2017-01-06

I have an 11 degree and a 9 degree callaway X2 HOT fairway wood.  I have a slow swing and have senior shafts on my driver, 3 wood, hybrids and irons.  I'm 73 years old and shoot anywhere from 88 to 95.  What shafts would you recommend? About $50 each.

Asked by: Chuck
Did you mean to say that you have the Callaway X2 Hot 9 and 11 woods? An Aldila shaft like the NVS 55 (AL202202) could work well. The Grafalloy ProLaunch Blue 45 (TT0106) could be another good choice. The A flex is the Senior flex with both of these shafts. Both of these shafts will fit the Callaway X2 Hot fairway woods.
Answered by: JimY
Date published: 2016-11-14

Is this shaft same as a senior fairway wood shaft.

Asked by: Chuck
No this is a shaft for hybrids. It has a .370" tip diameter which is to big to fit fairway woods and the length is 42" long which is to short to fit fairway woods. You would use the NV Wood (1205W) shaft for both drivers and fairway woods. http://www.golfworks.com/aldila-nv-graphite-wood-shaft/p/1205W/
Answered by: JimY
Date published: 2016-11-11

I have a cobra 20* baffled that has an aldila NV-HL 65 shaft in stiff. I want to change that out to regular shaft. Can u direct me to the nearest comparable shaft? Thanks

Asked by: Nicnack
AT 20 degrees I am assuming this is an older Cobra Baffler Hybrid? If that is the case it uses a .335" tip diameter hybrid shaft, which is not a common size hybrid shaft these days. The only .335" tip diameter hybrid shaft we stock is the UST ProForce V2 Hybrid (US0013H) and it should be fairly comparable to the NV-HL shaft the Aldila made for Cobra. http://www.golfworks.com/ust-mamiya-proforce-v2-graphite-hybrid-shaft/p/US0013H/
Answered by: JimY
Date published: 2016-08-29
  • y_2017, m_11, d_22, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_AL205201, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks