Aldila NV Graphite Wood Shaft

Aldila NV Graphite Wood Shaft


55A Flex - 335 tip (54g) 2B2M
$44.99
Backordered
55R Flex - 335 tip (56g) 3B2M
$44.99
Backordered
55S Flex - 335 tip (57g) 4B1M
$44.99
In Stock
55X Flex - 335 tip (58g) 5B1M
$44.99
In Stock
65R Flex - 335 tip (67g) 3B2M
$44.99
In Stock
65S Flex - 335 tip (67g) 4B2M
$44.99
In Stock
65X Flex - 335 tip (68g) 5B2M
$44.99
In Stock
75R Flex - 335 tip (78g) 3B1H
$44.99
In Stock
75S Flex - 335 tip (78g) 4B1H
$44.99
In Stock
75X Flex - 335 tip (78g) 5B1H
$44.99
In Stock
65R Flex - 350 tip (67g) 3B2M
$44.99
In Stock
65S Flex - 350 tip (67g) 4B2M
$44.99
In Stock
65X Flex - 350 tip (68g) 5B2M
$44.99
In Stock
75R Flex - 350 tip (78g) 3B1H
$44.99
In Stock
75S Flex - 350 tip (78g) 4B1H
$44.99
In Stock
75X Flex - 350 tip (78g) 5B1H
$44.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Aldila NV Graphite Wood Shaft

The Aldila NV graphite wood shaft provides the player with very uniform feel and consistent performance due to its constant taper wall thickness design.

  • .335" and .350" tip diameters available
  • Constant taper design to eliminate "dead spots" or inconsistent flex zones
  • Unmatched consistency throughout the NV line, regardless the shaft weight
  • Available in 55, 65, 75 or 85 Series

Trimming Instructions

Aldila NV Graphite Wood Shaft is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from Smoooooth!!! This is one smooth shaft. I purchased the 65X .335 for my Supertri a while back as the stock shaft felt like a wet noodle. I have a high swing speed coupled with a quick transition which really loads this shaft up well. It's just so responsive, that I can feel the clubheads presence throughout the swing. Nice medium to low launch and the ball just soars on a smooth arc with excellent roll out. I have since pulled the tour issue Project X out my Titleist 910D3 are re-tipped this shaft to fit. With all of the new models (shafts) that have been released, it's easy to see why Aldila hasn't discontinued this classic! Definitely one of the "best bang for your buck" shafts on the market!
Date published: 2012-11-23
Rated 5 out of 5 by from Smoooooth!!! This is one smooth shaft. I purchased the 65X .335 for my Supertri a while back as the stock shaft felt like a wet noodle. I have a high swing speed coupled with a quick transition which really loads this shaft up well. It's just so responsive, that I can feel the clubheads presence throughout the swing. Nice medium to low launch and the ball just soars on a smooth arc with excellent roll out. I have since pulled the tour issue Project X out my Titleist 910D3 are re-tipped this shaft to fit. With all of the new models (shafts) that have been released, it's easy to see why Aldila hasn't discontinued this classic! Definitely one of the "best bang for your buck" shafts on the market!
Date published: 2012-11-23
Rated 5 out of 5 by from Waiting To Get Outside With These! Have an Adams Speedline S driver and 3W. I found the 50g factory shaft even in 'Stiff' to be too whippy, and too long. My swing speed is 105, and the club head was always too late to the ball, and the factory shaft had virtually no resistance to torque. Had the Ottawa store chop down a 75g NV shaft for the driver, and also had the same shaft put on the 3W. So far just machine hits indoors, but I have yet to slice a shot with either. Driver consistently in the 255-270 range and the 3W in the 240-250 range. Waiting to see what a quality ball can do outside, and not a range ball on a machine. Quality of work was excellent, and new Golf Pride grips were done as well on these clubs. Turnaround was a couple days.
Date published: 2015-03-21
Rated 5 out of 5 by from Consistent feel and results! I have been searching for a decent shaft for my TM M1. This shaft is perfect. Sacrificed some distance but gained complete control. I can shape a variety of shots and haven't been in trouble with this shaft.
Date published: 2016-04-25
Rated 5 out of 5 by from Great shaft I bought the Aldila NV green shaft to go in my R-15 driver. I had the shaft pured, trimmed and a new adaptor and taylormade grip installed. I have this shaft in a 7 wood and 9 wood and it's just right for me. I firmly believe in puring (spine align) the shaft. I got the new shaft, put it right in my R-15 and it hits great, also about 15 yards further. I will also get it for my R-15 3 wood.
Date published: 2016-02-09
  • y_2017, m_5, d_25, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_1205W, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What size tip for an old 2009 Taylormade Burner fairway 3/5 wood?

Asked by: Stone
The 2009 Burner Fairway woods used a .350" tip diameter shaft. You can use the BB9008 adaptor to install .335" tip size shafts into these fairway woods.
Answered by: JimY
Date published: 2017-05-10

Want to place ALDILA NV 55-A shaft on a Ping G-20 Driver can I get and what components do I need ? What would it cost if you installed?

Asked by: Wilmac6
To install the NV 55 A flex into the Ping G20 driver you will need the Ping BB9048 adaptor for the .335" tip size shaft. Our shaft installation charge is $19.95.
Answered by: JimY
Date published: 2017-05-04

I have an old Callaway Warbird Deuce (13*, 2-wood) that I want to re-shaft. My driver swing speed is 87 mph. Would the NV 65 R-Flex be a good option? I only plan to use this club off the tee. Any other shaft suggestions for this club?

Asked by: Trapper
The NV could work well in this Warbird Deuce. Another shaft to look at would be the Graphite Design YS6+ (YS633WPL). It is actually a shaft that was designed to be it's listed flex when installed into a bore through. https://www.golfworks.com/graphite-design-ys-6-graphite-wood-shaft/p/YS633WPL/
Answered by: JimY
Date published: 2017-03-29

Can this shaft be put into a callaway xhot pro 15 degree and 19 degree fairway woods? If so which model would be best? 55/65/75?

Asked by: GoinDeep
The Aldila NV Wood shaft (1205W) can be used in the Xhot Pro fairway woods. They take a .335 tip and the 1205W is a .335 tip. Aldila's trimming instructions on the 1205W for fairway woods calls for trimming 1" from the tip for all fairway woods (no progression, just 1" on the #3 wood and #5 wood), then trim to final playing length from the butt end after assembly. As far as which weight is best, the original shaft in those fairway woods were in the 5-60 gram range. That doesn't mean that is the best weight for you, just that was the stock shaft weight. If you are a strong swinger, generally we would recommend the 75 gram weight. If you were looking for distance and had a slower swing speed, the 55 gram would generally be the recommendation. The 65 could work for either type of player, just depending on the feel they are looking for. Ultimately, you need to go with the shaft that provides the best overall feel and performance for your game.
Answered by: GW2002
Date published: 2017-03-22

I need this shafts for a king cobra f6 driver

Asked by: Mark Bg
The NV will fit the King Cobra F6 driver. We also have the BB9079 shaft adaptor if you need it. https://www.golfworks.com/the-golfworks-universal-cobra-adaptors/p/BB9079/ If you need help with your order you can call 1-800-848-8358 and a Customer Service Rep will be glad to help you.
Answered by: JimY
Date published: 2017-03-14

I'm thinking about re-shafting my Callaway driver with the Aldila NV 55R. I have always liked the NV shaft over others. Any thoughts?

Asked by: Lynn
If have hit the NV 55 and it does a good job of maintaining the same playing characteristics as the NV 65. A lot of time the lighter weight version will play more flexible and create a higher ball flight. I did not see that with the NV55. It could work well for you.
Answered by: JimY
Date published: 2017-03-06

Do these come with grip installed?

Asked by: Chris
No shafts do not include grips. Grips have to be purchased separately and if you want us to install them there would be an additional charge.
Answered by: JimY
Date published: 2017-02-24

Can the Aldila NV 65R shaft be fitted with the TM M2 driver adapter and trimmed to 45"?

Asked by: Rudy
Yes we can do this for you. You will need the TM0023 for the M2 driver. It might be best to call in your order to Customer Service at 1-800-848-8358.
Answered by: JimY
Date published: 2017-02-21
  • y_2017, m_5, d_24, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_60
  • loc_en_US, sid_1205W, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks