Aldila NVS Graphite Wood Shafts

Aldila NVS Graphite Wood Shafts

55A Flex - 335 tip (54g) 2B2M
In Stock
55R Flex - 335 tip (56g) 3B2M
In Stock
55S Flex - 335 tip (57g) 4B2M
In Stock
65R Flex - 335 tip (67g) 3B2M
In Stock
65S Flex - 335 tip (68g) 4B2M
In Stock
65R Flex - 350 tip (67g) 3B2M
In Stock
65S Flex - 350 tip (68g) 4B2M
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

Aldila NVS Graphite Wood Shafts

The Aldila NVS graphite wood shaft features a higher launch and all the same unmatched performance and incredible feel of the original NV shaft.

  • .335" and .350" tip diameters available
  • Constant taper design produces uniform feel and performance
  • A more responsive shaft tip for a higher ball flight
  • The most popular weight for high performance drivers
  • No "dead spots" or inconsistent flex zones

Trimming Instructions

Aldila NVS Graphite Wood Shafts is rated 4.7 out of 5 by 7.
Rated 5 out of 5 by from accuracy and balance Re-shafted an older Taylormade quad with nvs 65R. Could not believe the accuracy with an increase in distance (from staying in fairways, no doubt) Re-shafted my 4 and 7 woods with same. unbelievable balance, feel and accuracy. The feel improved my rhythm so I slowed down my swing and picked up a few yards. If I had it all to do over I'd keep the 65 on the 4 and 5 but put a 55 gr on the driver, though..Mr golf buddy keeps trying to steal the 4 and 7.
Date published: 2015-01-28
Rated 5 out of 5 by from Did the trick. A few months back, I purchased a Taylor Made R15 TP 3 wood. My bag is filled with TP ironset and hybrids. I prefer these clubs because I want limited offset and I don't need help squaring the club at impact. I didn't care for the stock shaft that came in the 3 wood. It had a vague feel (had difficulty feeling exactly ehere my misses occurred on the club face) and it was definitely designed to lower the ball flight. This normally isn't an issue for me as I tend to flight the ball medium to high with all my clubs. The club head is also designed with a more forward center of gravity to keep ball flight down. This combination didn't work well for me from the fairway and rough. I purchased the Aldila NVS shaft and it gave me all the qualities I needed and noe I feel as confident from the ground as I had from the tee and I also like the height and carry more from the tee. Aldila shafts really suit my game. I now have one version in my driver, 3 wood, 3 hybrid and 4 hybrid.
Date published: 2016-07-18
Rated 5 out of 5 by from Great Shaft I recently put a NVS 55 A shaft in my Ping G25 3 wood and I'm loving the results. Nice high ball flight with alittle draw. Perfect!
Date published: 2016-06-18
Rated 4 out of 5 by from Aldila NVS Shaft Best shafts for weekend warriors! If you are a low shot hitter, this shaft gives you elevation.
Date published: 2015-07-08
Rated 5 out of 5 by from Good for me I find this to be the best overall shaft and value for my drivers and woods.
Date published: 2015-06-22
Rated 4 out of 5 by from Solid performer Put this shaft in a Cobra F7 and a Callaway hot driver both perform better than the stock shaft for me a slow swinger . Average drive is 210/220 this shaft in regular works for me
Date published: 2017-12-12
Rated 5 out of 5 by from Consistent ball flight Wonderful shaft the ball flight is very consistent. I wish I would have done this long ago.
Date published: 2017-08-01
  • y_2018, m_2, d_18, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_AL202202, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I have Ping G20 Driver & Fairway woods (Reg Flex). Since I have good club speed I want to change to a stiff Flex shaft. What shafts would you recommend each for the Driver & Fairway woods? Thanks

The Ping G20 driver and fairway woods were a .350 hosel. The only .350 shafts we carry are the Aldila NV 65 (code 1205W35) and Aldila NVS 65 (code AL0001W). You can use any .335 shaft with the G20 if used in conjunction with the .335 replacement ferrule (code BB9048 .335"). Our MPF shaft rating for the stock TFC169 shaft in stiff flex is 4D3S.
Answered by: Kris
Date published: 2018-01-29

What is the difference between the NV and the NVS shft?

Asked by: Bogeyman
The NVS is designed for a mid trajectory and the NV a low/mid trajectory. The NVS will play a little more flexible in the same flex as the NV.
Answered by: JimY
Date published: 2018-01-08

I don't see trim code W18 on the trimming instruction page. Please advise.

Asked by: Dan G
At this link scroll down to page 3 and you will see the W18 trim code.
Answered by: JimY
Date published: 2018-01-04

 Would it be possible to install this shaft into a 355 Mizuno iron head ? Possibly using an adapter or shim ?  If not what other graphite shaft is comparable to this shaft ?  Thanks need before xmas

Asked by: John
You would also have to create a shim to make the .335" or .350" parallel tip shaft fit the .355" taper hosel bore. The .355" tapered hosel bore is .355" at the bottom of the bore and approximately .370" where the shaft exits the top of the hosel. The .350" tip size shaft would be structurally stronger for this installation then the .335" tip size and a better choice. The shaft will likely play more flexible then an iron shaft because of the iron head weight being heavier then the driver or fairway woods. In a .355" taper tip iron shaft you could look at the Steel Fiber 70CW (AT0020IE) or the UST Recoil 65 (US0100) shafts. Both will work with the Mizuno iron head.
Answered by: JimY
Date published: 2017-11-13

I have a RBZ Driver w/broken XCon 5, Matrix Ozik (44gm) .350 tip, S-flex shaft that I need to replace. Any suggestions about shafts from GW that fill the bill, shaft flex and weight comparable? I looked at ur website and saw only Aldila NVS 65 (68g).

Asked by: Les J
The NV (1205W35) and the NVS (AL0001W) are the only two .350" tip size wood shafts we still stock. The NVS would be a little better match here. I would suggest the Grafalloy ProLaunch Blue 45 (TT0106) as a better replacement for the Matrix Ozik 44 gram shaft. You would need the TM0017 RBZ shaft adaptor to install this .335" tip diameter shaft into this RBZ driver.
Answered by: JimY
Date published: 2017-11-06

I have this shaft 55R  355 tip installed on a gap wedge and love it. Would you recommend me installing this shaft on a set of mizunos jpx 825 pros. I am a senior 

Asked by: John
We do not offer the NVS graphite shaft in an iron shaft. The AL202202 is a .335" tip size wood shaft and cannot be used in an iron. Aldila does not manufacture an NVS iron shaft for the aftermarket. For your Mizuno JPX 825 irons you would need to use one of the .355" taper tip graphite shafts like the UST Recoil 65 (US0100) which is the lightest weight .355" taper tip graphite iron shaft we stock. It could match well with the JPX 825 heads.
Answered by: JimY
Date published: 2017-10-30

Hi, Would like to know if a NVS 65 R code AL0001WR 3B2M TIP.350 could match with a PING G5 head Driver?

Asked by: Birdy
Yes the .350" tip NVS 65 R flex shaft will fit the Ping G5 driver.
Answered by: JimY
Date published: 2017-10-10

what size ferrule do I need for this shaft?

Asked by: Jonathan
If you are ordering the AL202202 .335" tip size shaft you would need a .335" ferrule size like the 60PW. If you are ordering the .350" tip size shaft then you would need a .350" tip size ferrule like the 62OW.
Answered by: JimY
Date published: 2017-09-25
  • y_2018, m_2, d_18, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_60
  • loc_en_US, sid_AL202202, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks