Aldila NVS Graphite Wood Shafts

Aldila NVS Graphite Wood Shafts


55A Flex - 335 tip (54g) 2B2M
$44.99
In Stock
55R Flex - 335 tip (56g) 3B2M
$44.99
In Stock
55S Flex - 335 tip (57g) 4B2M
$44.99
In Stock
65R Flex - 335 tip (67g) 3B2M
$44.99
In Stock
65S Flex - 335 tip (68g) 4B2M
$44.99
In Stock
65R Flex - 350 tip (67g) 3B2M
$44.99
Backordered
65S Flex - 350 tip (68g) 4B2M
$44.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Aldila NVS Graphite Wood Shafts

The Aldila NVS graphite wood shaft features a higher launch and all the same unmatched performance and incredible feel of the original NV shaft.

Features:
  • .335" and .350" tip diameters available
  • Constant taper design produces uniform feel and performance
  • A more responsive shaft tip for a higher ball flight
  • The most popular weight for high performance drivers
  • No "dead spots" or inconsistent flex zones

Trimming Instructions

Aldila NVS Graphite Wood Shafts is rated 4.8 out of 5 by 6.
Rated 5 out of 5 by from accuracy and balance Re-shafted an older Taylormade quad with nvs 65R. Could not believe the accuracy with an increase in distance (from staying in fairways, no doubt) Re-shafted my 4 and 7 woods with same. unbelievable balance, feel and accuracy. The feel improved my rhythm so I slowed down my swing and picked up a few yards. If I had it all to do over I'd keep the 65 on the 4 and 5 but put a 55 gr on the driver, though..Mr golf buddy keeps trying to steal the 4 and 7.
Date published: 2015-01-28
Rated 5 out of 5 by from Did the trick. A few months back, I purchased a Taylor Made R15 TP 3 wood. My bag is filled with TP ironset and hybrids. I prefer these clubs because I want limited offset and I don't need help squaring the club at impact. I didn't care for the stock shaft that came in the 3 wood. It had a vague feel (had difficulty feeling exactly ehere my misses occurred on the club face) and it was definitely designed to lower the ball flight. This normally isn't an issue for me as I tend to flight the ball medium to high with all my clubs. The club head is also designed with a more forward center of gravity to keep ball flight down. This combination didn't work well for me from the fairway and rough. I purchased the Aldila NVS shaft and it gave me all the qualities I needed and noe I feel as confident from the ground as I had from the tee and I also like the height and carry more from the tee. Aldila shafts really suit my game. I now have one version in my driver, 3 wood, 3 hybrid and 4 hybrid.
Date published: 2016-07-18
Rated 4 out of 5 by from Aldila NVS Shaft Best shafts for weekend warriors! If you are a low shot hitter, this shaft gives you elevation.
Date published: 2015-07-08
Rated 5 out of 5 by from Good for me I find this to be the best overall shaft and value for my drivers and woods.
Date published: 2015-06-22
Rated 5 out of 5 by from Great Shaft I recently put a NVS 55 A shaft in my Ping G25 3 wood and I'm loving the results. Nice high ball flight with alittle draw. Perfect!
Date published: 2016-06-18
Rated 5 out of 5 by from Consistent ball flight Wonderful shaft the ball flight is very consistent. I wish I would have done this long ago.
Date published: 2017-08-01
  • y_2017, m_9, d_25, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_AL202202, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

what are the differences between the NV55s and the NVS55s...Bend point, tip stiffness, etc.?

Asked by: Joe123
The NV55 S flex is a mid/high bend point and med/firm tip stiffness. The NVS55 S flex is a mid bend point and medium tip stiffness. The NVS 55 S flex will play a little more flexible then the NV55 S flex.
Answered by: JimY
Date published: 2017-08-11

You keep speaking of the NVS shaft as a mid flight but the Aldila web site shows it as a high trajectory shaft....something I need and use.  Which is it...high or mid?

Asked by: Dan
In our catalog we list it as a mid trajectory. I just looked at the Aldila web site and in the specifications they list it as a mid launch shaft. http://www.aldila.com/nvs/ I have hit this shaft a number of times and for me I would call it a mid launch and trajectory.
Answered by: JimY
Date published: 2017-08-28

I am replacing an existing Aldila shaft which has a length of 43.25 inches from tip to butt. What is the length of this shaft; and, if needed can it be cut to the above length?

Asked by: tful999
This shaft is 46" long. Yes it can be cut to 43.25" long. The shaft you have would have been cut down from the 46" raw length.
Answered by: JimY
Date published: 2017-07-13

Nvs 75.5 350 is this a stiff shaft?

Asked by: Hammer
We do not stock the NVS in a 75 gram S flex .350" tip size. There is a chance we can special order the shaft for you from Aldila. You would need to call Customer Service at 1-800-848-8358 and they can help you with the Special Order.
Answered by: JimY
Date published: 2017-07-10

I was considering getting this shaft in a stiff flex for a 4 wood, but am locked up about which weight to pick. Any guidance would be greatly appreciated.

Asked by: Jason
That somewhat depends on what your goal is for this 4 wood. If you want more control with this club the heavier shaft, 65 grams could work well. If you just want more distance and you have a smooth swing tempo then the 55 gram version could work well. Stock fairway wood shafts are normally a little heavier then the driver shafts but it becomes a fitting preference.
Answered by: JimY
Date published: 2017-06-23

Would the Aldila NVS 55S shaft fit into my Taylormade AeroBurner driver? I know I need a tapered tip shaft.

Asked by: Mike
The NVS 55 does not come in a .350 tip, which is what you need for the Aeroburner driver. You can still use the .335 tip, but would need to use a shim to make it fit. The shim you would need would be the SHIM 15. The shaft is not taper tip. Both the .350 and the .335 options are parallel tip.
Answered by: GW2002
Date published: 2017-06-19

Hi! Do u have Aldila NVS 45-A or any similar to it in specs and performance?(below 50 gms).

Asked by: Adam
We do not stock the NVS 45 A flex. We would have to special order this shaft for you. We do have the Grafalloy ProLaunch Blue 45 A flex (TT0106) which has been a very popular shaft and has similar spec's as the NVS 45. https://www.golfworks.com/grafalloy-prolaunch-blue-45-65-graphite-wood-shafts/p/TT0106/
Answered by: JimY
Date published: 2017-05-30

I'm looking to try a shorter shaft for control in a Cobra Bio Cell.  The original length is 45.75" and the threaded adaptor end to grip measures 44.5" Is the NVS 65S a candidate to be shortened to overall length to 42.5"? Any other shaft suggestions? 

Asked by: Mashtun
You can use the NVS 65 S for a 42.5" playing length. The average length of most #3 woods today is 42.5-43". The NVS is a a medium tip stiffness, mid trajectory shaft. The Graphite Design YS+ Series is another shaft that is similar that you might consider.
Answered by: GW2002
Date published: 2017-04-07
  • y_2017, m_9, d_25, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_53
  • loc_en_US, sid_AL202202, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks