Aldila Value Series Graphite Iron Shaft

Aldila Value Series Graphite Iron Shaft

Platinum L/A Flex - 370 tip (79g) 1/2D3S
In Stock
Black L/A Flex - 370 tip (79g) 1/2D3S
In Stock
Black R/S Flex - 370 tip (88g) 3/4B2S
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

Aldila Value Series Graphite Iron Shaft

The Aldila Value Series graphite iron shaft is the perfect choice for the mid to high handicap golfer.

  • .370" tip diameter
  • 100% graphite, lightweight design with a low bend point and soft tip
  • Affordable graphite upgrade choice
  • L/A flex irons offered in black or platinum

Trimming Instructions

Aldila Value Series Graphite Iron Shaft is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from great iron shaft The shaft was perfect for my swing.....thanks again
Date published: 2015-06-01
  • y_2017, m_12, d_10, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_VXIAL, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Is there any dfference between the Platinum and the black L/A? I'm 86 play 3 x a week. Went from Graffaloy Pro-lite iron to reg. iron shafts because Pro-lite too lite. Looking to go back to graphite that feels like iron. Recommendations ?

Asked by: Len
No, the L/A flex shafts are the same in both the Platinum and Black finish. Just a color change. These shafts being a little heavier in weight then the ProLite graphite shaft could help to give you more the feel of steel you are looking for.
Answered by: JimY
Date published: 2017-10-02

can i send my clubs to you and have them done?

Asked by: action
Yes you can send your clubs to us to have them reshafted. Here is the link for our repair form.
Answered by: JimY
Date published: 2017-09-25

How do I get the tip & butt trimming guide for the shafts so I can do it myself?

Asked by: Vernon
The shaft trimming instructions are at this link on our web site. You will find the trim codes for the these shafts in the specification box for these shafts. At this link scroll down the page and you will see the specifications for these shafts.
Answered by: JimY
Date published: 2017-07-24

You recommend this shaft for mid to high handicapper. Why do you not recommend it for a low handicapper? Thinking about putting it in Mizuno M29. Is it compatible?

Asked by: Texdawg
The Aldila Value Series shafts test and play a little more flexible then normal and generally the inexpensive graphite shafts are not quite as consistent in their specifications. Although these are better then most in their consistency. They could work for any handicap golfer depending on their individual needs. These shafts will not fit the Mizuno MP-29 irons. For the MP-29 irons you need .355" tip size iron shafts.
Answered by: JimY
Date published: 2017-09-09

would this shaft work with a Callaway Apex pro......My swing speed is around 85--90

Asked by: stu
the heads are reamed out to .370....just wondering if there would be any problem putting this shaft in. My club head speed is any where from 85 to 90.
Answered by: stu
Date published: 2017-06-08

Would this shaft pair well with the dbm heads? Looking for a higher trajectory.

Asked by: cmcd17
Yes the Value Series shafts will work fine with the DBM irons and should help create a higher trajectory.
Answered by: JimY
Date published: 2017-03-27

Will this fit a Sldr driver 

Asked by: Bun
The VXIAL shaft is a .335 tip and will fit a Taylor Made Sldr Driver.
Answered by: GW2002
Date published: 2017-03-16

Do .370 parallel tip graphite iron shafts need to be tip trimmed? If so, is there an industry standard? Or are they unique to each shaft manufacturer?

Asked by: Bill
Basically all .370" tip size graphite iron shafts need to be tip and butt trimmed. There is no industry standard as it will vary with different shaft manufactures and shaft models. For the Aldila Value Series iron shafts they offer an L/A combinations flex which can be cut to an L (Ladies) flex or A (Senior) flex. The L follows trim code IR6 and the A flex the IR12 code. The R/S combination flex shaft follows IR6 for the R flex and IR12 for the S flex. At this link scroll down to the second page and you will see the Iron Trim Chart with these codes.
Answered by: JimY
Date published: 2017-02-27
  • y_2017, m_12, d_10, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_31
  • loc_en_US, sid_VXIAL, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks