AXE XCaliber Graphite Wedge Spin Shafts

AXE XCaliber Graphite Wedge Spin Shafts


AXE XCaliber Wedge Spin - 85 W Flex - 370 tip (85g)
$24.99
Backordered
AXE XCaliber Wedge Spin - 90 W Flex - 370 tip (95g)
$24.99
Backordered
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

AXE XCaliber Graphite Wedge Spin Shafts

Features:
  • The NEW filament wound design increases stability and consistency.
  • The unique tapering geometry and stiffness profile increases height and spin rate by 1000-2000 rpm over steel wedge shaft designs.
  • Designed for players who need more spins with their wedges.

Trimming Instructions

Arthur Xtreme Engineering Xcaliber Graphite Wedge Shaft Specifications

AXE XCaliber Graphite Wedge Spin Shafts is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from One hop and stop! I am tickled to death, now i haven't really stuck one and drawn it back any more than a foot but in my MMB 17 gap wedge can be trusted to give me the one hop and stop i wanted with this shaft. My pitching wedge is next.
Date published: 2014-09-12
Rated 5 out of 5 by from Great shaft!!!! Replaced a wedge flex steel shaft in a 58deg SW and it made an immediate playability increase. Felt like it was specifically made for the club. Highly recommend this shaft.
Date published: 2015-11-24
Rated 5 out of 5 by from Great I fitted these shafts to all my wedges and love feel I now get. I don't believe I've lost any distance but have gained a lot more accuracy.
Date published: 2016-06-01
Rated 5 out of 5 by from Axe wedge shafts These shafts are amazing. The spin action I get with these shafts are unmatched.
Date published: 2016-06-11
Rated 5 out of 5 by from great control accuracy spin is adequate. overall excellent shaft. will axe xcaliber be my shaft of choice yes
Date published: 2016-07-08
  • y_2017, m_5, d_25, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_AS0037, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I am using Scratch and Macgregor wedges and am wondering if the Xcaliber Graphite Wedge spin shafts will work in them. Thank You

Asked by: Navarro 1
I am assuming the Scratch Wedge uses a .355" taper tip shaft and the Xcaliber Wedge Spin will not fit because it is only available in a .370" parallel tip, which is to large to fit. With the MacGregor wedge it depends on which model MacGregor wedge you have. Some of their wedges used a .355" taper tip and some used a .370" parallel tip. If you can tell me which model MacGregor wedge you have there is a good chance I can tell you which tip size shaft it uses.
Answered by: JimY
Date published: 2017-05-10

On the trimming instruction this shaft is not listed but, I see on your website it is listed as an IR 30.  Your shaft trimming instructions sheet says an IR 30 means it is "tip trim to length only".  Just want to make sure - am I reading it right?

Asked by: Mike
That is correct the trimming instructions are tip trim to length only.
Answered by: JimY
Date published: 2017-02-20

I purchased the xcaliber spin85 - tip size 370. Unfortunately I didnt realize my Nike wedges have 335 hosels. I want to use the shafts. I am thinking my only option is to bore out the hosels. any other suggestion????

Asked by: Doug
Our recommendation would be to ream or rebore the hosel.
Answered by: JimY
Date published: 2017-03-20

I have a Mac Daddy 50 degree wedge and a Vokey SM4 54 degree wedge I would like to have you put the XCaliber Spin Shaft in. Can you bore the hosels and fit the wedges? How do I send you my wedges?

Asked by: moman
Yes we could ream (rebore) these hosels to accept the Xcaliber Spin shaft. Here is a link to our Club Repair Form that you can fill out and send in with your wedges. http://www.golfworks.com/images/art/RepairForm.pdf
Answered by: JimY
Date published: 2016-12-05

What XC shaft(s) are suggested graphite replacements for Cobra Baffler 6 - GW irons and Cleveland RTX 588 58 degree SW. The CB's are R flex steel and the Cleveland is a steel W flex.

Asked by: MAW
The Xcaliber Iron (AS0023) could make a good replacement for the Cobra Baffler Irons. For the Cleveland wedges, which are .355" taper tip, you will need the Xcaliber Irons (AS0028). Generally the W flex in wedges is an S flex.
Answered by: JimY
Date published: 2016-07-07

Would these shafts work with Callaway Mack daddy 2 or 3?

Asked by: foamy
No the Xcaliber Wedge Spin shafts are only available in a .370" parallel tip and the Mack Daddy wedges use a .355" taper tip shaft. The Xcaliber Wedge shaft is to big to fit the Mack Daddy wedges.
Answered by: JimY
Date published: 2016-06-22

Would this shaft fit my edel sand wedge

Asked by: pat
No, the Xcaliber Spin shaft is only manufactured with a .370" parallel tip and the Edel wedges use a .355" taper tip shaft.
Answered by: JimY
Date published: 2016-06-13

I'm going to build two wedges for my 75 year old father, about a 25 hdcp. I'm thinking the 85 gram would be best for him, do you have any opinions otherwise? 

Asked by: Thorny
The 85 gram Xcaliber Spin wedge shaft should be a good option. Not any other wedge specific options at that weight.
Answered by: GW2002
Date published: 2016-05-07
  • y_2017, m_5, d_25, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_en_US, sid_AS0037, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks