AXE XCaliber Taper Tip Graphite Iron Shaft Set

AXE XCaliber Taper Tip Graphite Iron Shaft Set


XCaliber R Flex - .355", Taper Tip Set (39"-36") (75g) 3B2H
$139.99
In Stock
XCaliber S Flex - .355", Taper Tip Set (39"-36") - (85g) 4B2H
$139.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

AXE XCaliber Taper Tip Graphite Iron Shaft Set

The Arthur Xtreme Engineering Xcaliber graphite iron shaft features Zone Stiffness Technology (ZST) which helps golf shots get airborne without excessive spin.

Features:
  • .355" taper tip diameter
  • Lowest balance point of any iron in the industry combined with a med/stiff lower section helps get shots airborne without excessive spin
  • At 15 cpm stiffer than the XCaliber Hybrid, easy to make a progressively stiffer set of clubs

Individual AXE XCaliber Iron Shafts can be purchased here

Trimming Instructions

Arthur Xtreme Engineering Xcaliber Graphite Iron Shaft Specifications

AXE XCaliber Taper Tip Graphite Iron Shaft Set is rated 5.0 out of 5 by 8.
Rated 5 out of 5 by from Excellent Shafts Bought them to replace my steelfiber shafts as I didn't like the boardy feel and left shoulder was suffering from the heavy weights. So far these shafts are really smooth and feel a lot more lively, could be due to the light weights allowing me to feel the club head more. Initially I was going to get the stiff flex since I was scared in the huge weight gap, but Arthur was very helpful in assuring me that the R flex was a good fit for me. For the price, it's really an underrated product.
Date published: 2016-04-08
Rated 5 out of 5 by from Great graphite taper tip shafts Excellent set of taper tip shafts for forged irons. Perfect balance, good trajectory and they look great. A fantastic way of extending the life of many older forged iron sets. Highly recommended.
Date published: 2014-08-17
Rated 5 out of 5 by from Nice feeling shaft I bought a set of these about 3 weeks ago to put in my Ping I-25 irons. They have a great feel and have a mid to mid high kick point. I replaced the Ping steel shafts with these. Still dialing them in a bit as I made them about 3/8 of an inch longer and had to bend the lie angle a little flatter to compensate for the increased length. No vibration with them.
Date published: 2016-05-06
Rated 5 out of 5 by from A great shaft for sure. I put a set of these taper tips into my Nike Covert 2.0 forged which unfortunately a buddy had to buy from me. I plan on ordering another set for a set of Ping Ansers which I just got my hands on. Excellent shafts in my irons and also have them in my Wishon driver and 4W. Can't recommend enough. A1!
Date published: 2017-02-01
Rated 5 out of 5 by from delivers on distance I had a hard time swingweighting these, today I hit them at the range. they delivered as promised, high and far, great feel, not harsh. mid irons 7 yrds further, wedges 10 yard further and long irons 5 yard further than my xp90's but with more dispersion
Date published: 2016-05-06
Rated 5 out of 5 by from Nice paint job I don't think I'm going to put him in a set of Forge golf clubs maybe a perimeter wait, like a tailor-made but then they just go to far and there's just no telling which way it's going to be so maybe I could try am in a forge club
Date published: 2016-09-15
Rated 5 out of 5 by from Economically Efficiency Installed as upgrade from steel for player seeking more distance and reports indicate great acceptance by player. Seeing great performance at a very reasonable price.
Date published: 2016-04-29
Rated 5 out of 5 by from Very consistent ..... Good weight.. One of few taper tip irons shafts available at a decent, reasonable price.
Date published: 2015-10-25
  • y_2017, m_2, d_19, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_AS0028S, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

How many shafts does this set include please?

Asked by: Bruce
The set includes 4 through PW which is 7 shafts. You can purchase the shafts individually at AS0028.
Answered by: JimY
Date published: 2017-01-30

If there are 7 shafts in the set, the longest being for a 4 iron, could I use it my 5 iron and start from there?

Asked by: Snapper
The 4 iron shaft is the longest raw length. Yes you can start with the 5 iron shaft and go from there. That will mean that you will use the 36" raw length shaft for the 9 iron and all wedges.
Answered by: JimY
Date published: 2017-01-23

Hi, I'm currently playing graphite stiff....TM Reax graphite. 6 iron swing speed is 85mph, with a violent transition. 6 iron distance is about 175 yds. What flex do you think would be best in the AXE shafts? Thanks for any help, Warren

Asked by: Warrenrk
You would want the S flex in the Xcaliber shaft. The 85 gram weight can also help to give you a little more control with your violent transition.
Answered by: JimY
Date published: 2017-01-18

Senior shaft available for the xcalibers?

Asked by: sacgeek
No Xcaliber does not manufacture a Senior flex taper tip irons shaft. The only taper tip graphite iron shafts that we have available are the Aerotech SteelFiber 70CW (AT0020IE) and the Paderson Kinetixx TS-I Trajectory Series Iron (PK0105). We can special order any of the UST Recoil .370" tip diameter shafts from UST in a .355" taper tip.
Answered by: JimY
Date published: 2017-01-16

How many shafts in the set? I need 4 - PW

Asked by: Philr56
The set of shafts is 4 - PW which is 7 shafts. You can also order them individually at AS0028.
Answered by: JimY
Date published: 2016-12-27

Do you think the AS2008 TaperTip Graphite Iron Shaft set will be replenished in January, since Robin Arthur is coming out with an all new line of shafts in March?

Asked by: gbarn4027
The next shipment of shafts which I was just told we will have possibly next week will be exactly the same as they have been. Any changes to the product line will be more towards spring before we would have them in stock. Our First Edition 2017 Catalog will have the existing Xcaliber product line.
Answered by: JimY
Date published: 2016-12-08

Can I use these shafts to replace my steel shafts in a set of Ping Black Dot GMax irons? They now have Ping CFS SR Steel Distance shafts. Also, is there a guide for tip and butt length trims?

Asked by: gbarn
Yes the AS0028 shafts will fit the Ping GMax irons. With these taper tip shaft there is no tip trimming. You will install them and butt cut them to your finished length. Here is a link to our standard length reference. http://www.golfworks.com/images/art/StdLengths.pdf Quite a few of these shafts are on backorder and are not due in until the middle of January 2017.
Answered by: JimY
Date published: 2016-11-21

What shafts would complement for use in 2 and 3 iron since these start at 4?

Asked by: 4golfgod
To be honest there really is not a very good match especially for a 2 iron because there are only a few taper tip graphite 2 iron shafts available. The UST Recoil 95/110/125 come with a 2 iron shaft. Also the Paderson Kinetixx IMRT Kevlar 950 Iron comes with a 2 iron shaft. Those are the only ones we stock in a 2 iron shaft and their specifications do not match up to this Xcaliber shaft. If you are using an R flex a shaft like the UST Recoil 670 (US0072) or for the S flex the Recoil 680 (US0072) could match up better. These are a stock .370" tip diameter but could be special ordered from UST with a .355" taper tip and set up for the 2 and 3 irons. You would need to contact our Customer Service Department for this special order. You can contact them at golfworks@golfworks.com or by calling 1-800-848-8358.
Answered by: JimY
Date published: 2016-11-03
  • y_2017, m_2, d_19, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_42
  • loc_en_US, sid_AS0028S, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks